Endplate injury as a risk factor for cage retropulsion following transforaminal lumbar interbody fusion: An analysis of 1052 cases

Causal relationship between bone mineral density and intervertebral disc degeneration: a univariate and multivariable mendelian randomization study

BACKGROUND

Although previous studies have suggested a possible association between bone mineral density (BMD) and intervertebral disc degeneration (IDD), the causal relationship between them remains unclear. Evidence from accumulating studies indicates that they might mutually influence one another. However, observational studies may be affected by potential confounders. Meanwhile, Mendelian randomization (MR) study can overcome these confounders to assess causality.

OBJECTIVES

This Mendelian randomization (MR) study aimed to explore the causal effect of bone mineral density (BMD) on intervertebral disc degeneration (IDD).

METHODS

Summary data from genome-wide association studies of bone mineral density (BMD) and IDD (the FinnGen biobank) have been acquired. The inverse variance weighted (IVW) method was utilized as the primary MR analysis approach. Weighted median, MR-Egger regression, weighted mode, and simple mode were used as supplements. The Mendelian randomization pleiotropy residual sum and outlier (MR-PRESSO) and MR-Egger regression were performed to assess horizontal pleiotropy. Cochran's Q test evaluated heterogeneity. Leave-one-out sensitivity analysis was further conducted to determine the reliability of the causal relationship. Multivariate MR (MVMR) analyses used multivariable inverse variance-weighted methods to individually and jointly adjust for four potential confounders, body mass index (BMI), Type2 diabetes, hyperthyroidism and smoking. A reverse MR analysis was conducted to assess potential reverse causation.

RESULTS

In the univariate MR analysis, femoral neck bone mineral density (FNBMD), heel bone mineral density (eBMD), lumbar spine bone mineral density (LSBMD), and total body bone mineral density (TB BMD) had a direct causal effect on intervertebral disc degeneration (IDD) [FNBMD-related analysis: OR(95%CI) = 1.17 (1.04 to 1.31), p = 0.008, eBMD-related analysis: OR(95%CI) = 1.06 (1.01 to 1.12), p = 0.028, LSBMD-related analysis: OR(95%CI) = 1.20 (1.10 to 1.31), p = 3.38E-7,TB BMD-related analysis: OR(95%CI) = 1.20 (1.12 to 1.29), p = 1.0E-8]. In the MVMR analysis, it was revealed that, even after controlling for confounding factors, heel bone mineral density (eBMD), lumbar spine bone mineral density (LSBMD), and total body bone mineral density (TB BMD) still maintained an independent and significant causal association with IDD(Adjusting for heel bone mineral density: beta = 0.073, OR95% CI = 1.08(1.02 to 1.14), P = 0.013; Adjusting for lumbar spine bone mineral density: beta = 0.11, OR(95%CI) = 1.12(1.02 to 1.23), P = 0.03; Adjusting for total body bone mineral density: beta = 0.139, OR95% CI = 1.15(1.06 to 1.24), P = 5.53E - 5). In the reverse analysis, no evidence was found to suggest that IDD has an impact on BMD.

CONCLUSIONS

The findings from our univariate and multivariable Mendelian randomization analysis establish a substantial positive causal association between BMD and IDD, indicating that higher bone mineral density may be a significant risk factor for intervertebral disc degeneration. Notably, no causal effect of IDD on these four measures of bone mineral density was observed. Further research is required to elucidate the underlying mechanisms governing this causal relationship.

Biomechanical Comparison of Subsidence Between Patient-Specific and Non-Patient-Specific Lumbar Interbody Fusion Cages

STUDY DESIGN

Biomechanical study.

OBJECTIVES

Several strategies to improve the surface of contact between an interbody device and the endplate have been employed to attenuate the risk of cage subsidence. 3D-printed patient-specific cages have been presented as a promising alternative to help mitigate that risk, but there is a lack of biomechanical evidence supporting their use. We aim to evaluate the biomechanical performance of 3D printed patient-specific lumbar interbody fusion cages in relation to commercial cages in preventing subsidence.

METHODS

A cadaveric model is used to investigate the possible advantage of 3D printed patient-specific cages matching the endplate contour using CT-scan imaging in preventing subsidence in relation to commercially available cages (Medtronic Fuse and Capstone). Peak failure force and stiffness were analyzed outcomes for both comparison groups.

RESULTS

PS cages resulted in significantly higher construct stiffness when compared to both commercial cages tested (>59%). PS cage peak failure force was 64% higher when compared to Fuse cage (P < .001) and 18% higher when compared to Capstone cage (P = .086).

CONCLUSIONS

Patient-specific cages required higher compression forces to produce failure and increased the cage-endplate construct' stiffness, decreasing subsidence risk.

Abdominal Arterial Translation in Lower Lumbar Spine Level Due to Positional Change: A Clinical Survey Using Intraoperative Computed Tomography

Background: Abdominal vascular injury, a fatal complication of lumbar disc surgery, should concern spine surgeons. This study aimed to compare the position of the abdominal arteries in the supine and prone positions and the factors involved. Thirty patients who underwent lumbar surgery by posterior approach were included. Methods: All patients underwent computed tomography (CT) preoperatively in the supine position and intraoperatively in the prone position. In the CT axial image, at the L4, L4/5 disc, L5, and L5/S1 disc level, we measured the shortest distance between the abdominal arteries and the vertebral body (SDA: shortest distance to the aorta), and the amount of abdominal arterial translation, defined as "SDA on intraoperative CT" minus "SDA on preoperative CT". Additionally, the preoperative CT axial images were evaluated for the presence of aortic calcification. Results: No significant difference in SDA values based on patients' positions was observed at each level. In males, the supine position brought the abdominal artery significantly closer to the spine at the left side of the L5/S level (p = 0.037), and, in cases of calcification of the abdominal artery, the abdominal artery was found to be closer to the spine at the left side of the L4/5 level (p = 0.026). Conclusions: It is important to confirm preoperative images correctly to prevent great vessel injuries in lumbar spine surgery using a posterior approach.

Transforaminal lumbar interbody fusion with an expandable interbody device: Two-year clinical and radiographic outcomes

Background

The use of interbody cages as an adjunct to lumbar spinal fusion remains an important technique to enhance segmental stability, promote solid arthrodesis, maintain neuroforaminal decompression, and preserve/improve segmental lordosis. Appropriate segmental lumbar lordosis and sagittal balance is well-known to be critical for long-term patient outcomes. This study sought to evaluate the radiographic and clinical results of TLIF in patients using an articulating, expandable cage. Primary endpoint was clinical and radiographic outcomes, including complications, at 12 and 24 months.

Methods

A total of 37 patients underwent open single-level or 2-level TLIF by a single surgeon using an expandable cage with concomitant bilateral pedicle screws and posterolateral arthrodesis. Clinical outcomes included ODI and VAS for back and legs. Radiographic outcomes included pelvic incidence and tilt, lumbar and segmental lordoses, and disc height at the operative level(s). All outcomes were collected at baseline, 2-weeks, 6-weeks, 3-months, 6-months, 12-months, and 24-months postop.

Results

A total of 28 patients were available for analysis. Nine patients failed to follow-up at 24 months. Mean ODI scores showed significant improvement, from pre-to-postoperative at 24 months (55%; p<.0001). VAS for back and legs was significantly lower at 24 months on average by 72 and 79%, respectively (p<.0001 for both). Both segmental and lumbar lordoses significantly improved by 5.3° and 4.2° (p<.0001 and p=.049), respectively. Average disc height improved by 49% or 6.1 mm (p<.001). No device-related complications nor instances of measured subsidence. One patient had a superficial infection, and another had an intraoperatively repaired incidental durotomy.

Conclusions

The use of an expandable cage contributed to improvement in both segmental and lumbar lordosis with no reported complications at 24-month follow-up. All clinical measures significantly improved as well. The expandable cage design represents an effective and safe option to increase cage size and allow significant segmental lordosis correction.

Implications of cage impactions in single-level OLIF treatment of degenerative spondylolisthesis

INTRODUCTION

Cage impactions (CI) of Oblique Lumbar Interbody Fusion (OLIF) appear to be a frequent mechanical complication with a potential functional impact.

OBJECTIVES

To determine the rate of CI occurrence, their risk factors and clinical implications in the case of combined single-level arthrodesis.

METHOD

A retrospective analysis of prospectively collected data was performed. All our patients with degenerative spondylolisthesis initially underwent OLIF combined with pedicle screw fixation (PSF). Intraoperative control with an image intensifier and a standard radiograph in the immediate postoperative period made it possible to assess the occurrence of CI, depending on the position of the implant. Secondary subsidence was sought on the standing radiological examination using EOS biplanar radiography during follow-up. The pelvic parameters were analyzed, as well as the occurrence of bone fusion. The clinical evaluation was made at≥1 year, by the Oswestry Disability Index (ODI), the walking distance (WD) and the Visual Analogue Scale (VAS).

RESULTS

In all, 130 patients out of the 131 included were analyzed. A CI occurred in 25.3% (n=33) of cases and of these, 94% (n=32) occurred intraoperatively. Postmenopausal women had more CI with an odds ratio (OR) of 5.8 (P=0.034). The "CI" group had a 9.5% lower ODI score than the "non-CI" group (P=0.0040), but both provided excellent ODI gains of 30.8±16 and 32.9±15.5% (P<0.0001). An "anterior" position of the implant allowed a greater gain in lumbar lordosis (P<0.001) but was associated with greater CI occurrence (P<0.001), with an OR of 6.75 (P=0.0018).

CONCLUSION

The occurrence of intraoperative cage impaction is a frequent event when performing OLIF. Postmenopausal women have an approximately 6 times greater risk of impaction than men, and patients with an "anterior" implant placement have a 7 times greater risk than with central placement. The negative impact of cage impactions on the clinical score (ODI) was significant after one year of follow-up.

LEVEL OF EVIDENCE

IV, non-comparative cohort study.

A meta-analysis of risk factors for cage migration after lumbar fusion surgery

Objective

Cage migration is a rare complication after lumbar fusion surgery, and it is also the cause of lumbar revision surgery. Previous studies have reported that many influencing factors can increase the incidence of cage migration. However, there still remains controversial. The current study was conducted to investigate the risk factors influencing incidence of cage migration.

Methods

A systematic database search of PubMed, Embase, Web of Science, Cochrane Library and Clinical Trials was performed for relevant articles published until July 2022. According to the inclusion and exclusion criteria, two evaluators independently conducted literature screening, data extraction and quality evaluation of the obtained literature. The Newcastle-Ottawa Scale (NOS) score was used for quality evaluation, and meta-analysis was performed by STATA 16.0 software.

Results

A total of 2126 relevant articles were initially identified, and 7 articles were finally included in this study for data extraction and meta-analysis. The results of meta-analysis showed that the bony endplate injury, pear-shaped disc, and screw loosening are significantly correlated with cage migration. The OR values (95%CI) of the three factors were 7.170 (3.015, 17.051), 8.056 (4.050, 16.023), and 12.840 (3.570, 46.177) respectively.

Conclusion

Bony endplate injury, pear-shaped disc, and screw loosening are the current risk factors for cage migration postoperatively.

Radiographic Analysis of Pedicle Screw Retractor-Assisted Transforaminal Lumbar Interbody Fusion for Single-Segment Spondylolisthesis in Adults: A Retrospective Study and Technical Note

Objectives

The objective of this study was to introduce a retractor that can be temporarily installed on unilateral pedicle screws to achieve distraction‐reduction and nerve root protection, and to analyze the efficacy and safety of retractor‐assisted transforaminal lumbar interbody fusion (TLIF) in the treatment of lumbar spondylolisthesis.

Methods

This was a retrospective study of 125 patients who underwent retractor‐assisted TLIF for single‐segment spondylolisthesis from November 2017 to February 2021. Based on morphology, patients were divided into degenerative (N = 66) and isthmic groups (N = 59). Differences in demographics and preoperative characteristics between the groups were analyzed using the independent samples t‐test and χ² test. Changes in radiographic parameters (disc height, foramen height, spondylolisthesis degree, slippage length, and segmental lordosis) before and after surgery were compared using the paired samples t‐test. Logistic regression analysis was performed to analyze the relationship between facet joint angle (FJA) and degenerative lumbar spondylolisthesis (DLS).

Results

Unilateral screw retractor‐assisted TLIF significantly corrected spondylolisthesis and improved disc height and segmental lordosis (p < 0.05). There was no significant difference in foramen height between the two sides before and after operation (pre: 15.81 ± 3.58 mm vs 15.69 ± 3.68 mm, p = 0.599; post: 18.65 ± 2.31 mm vs 18.74 ± 2.26 mm, p = 0.516). The degree of spondylolisthesis in the DLS group before surgery was significantly lower than that in the isthmic spondylolisthesis group (17.70 ± 5.62% vs 25.18 ± 9.73%, p < 0.001), whereas a similar degree of correction could be achieved after surgery (5.91 ± 3.12% vs 7.16 ± 5.69%, p = 0.135). FJAs from L3/4 to L5/S1 were significantly smaller in patients with DLS than those in with isthmic spondylolisthesis (p < 0.05). Patients with facet sagittalization were more likely to have DLS (β: −0.101, odds ratio [OR]:0.904, 95% confidence interval [CI]: 0.874–0.934, p < 0.001), while the cut‐off FJA of L4/5 for predicting L4 spondylolisthesis was 53.19.

Conclusions

Pedicle screw retractor‐assisted TLIF is effective and safe in treating both degenerative and isthmic lumbar spondylolisthesis. The unilateral retractor has the capacity to maintain the disc height achieved by paddle distractors, which optimizes the nerve protection and distractor placement. Patients with an FJA on L4/5 <53.19 were more likely to have DLS.

Influence of the geometric and material properties of lumbar endplate on lumbar interbody fusion failure: a systematic review

Background

Lumbar interbody fusion (LIF) is an established surgical intervention for patients with leg and back pain secondary to disc herniation or degeneration. Interbody fusion involves removal of the herniated or degenerated disc and insertion of interbody devices with bone grafts into the remaining cavity. Extensive research has been conducted on operative complications such as a failure of fusion or non-union of the vertebral bodies. Multiple factors including surgical, implant, and patient factors influencing the rate of complications have been identified. Patient factors include age, sex, osteoporosis, and patient anatomy. Complications can also be influenced by the interbody cage design. The geometry of the bony endplates as well as their corresponding material properties guides the design of interbody cages, which vary considerably across patients with spinal disorders. However, studies on the effects of such variations on the rate of complications are limited. Therefore, this study aimed to perform a systematic review of lumbar endplate geometry and material property factors in LIF failure.

Methods

Search keywords included ‘factor/cause for spinal fusion failure/cage subsidence/cage migration/non-union’, ‘lumbar’, and ‘interbody’ in electronic databases PubMed and Scopus with no limits on year of publication.

Results

In total, 1341 articles were reviewed, and 29 articles were deemed suitable for inclusion. Adverse events after LIF, such as cage subsidence, cage migration, and non-union, resulted in fusion failure; hence, risk factors for adverse events after LIF, notably those associated with lumbar endplate geometry and material properties, were also associated with fusion failure. Those risk factors were associated with shape, concavity, bone mineral density and stiffness of endplate, segmental disc angle, and intervertebral disc height.

Conclusions

This review demonstrated that decreased contact areas between the cage and endplate, thin and weak bony endplate as well as spinal diseases such as spondylolisthesis and osteoporosis are important causes of adverse events after LIF. These findings will facilitate the selection and design of LIF cages, including customised implants based on patient endplate properties.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13018-022-03091-8.

Prevalence and location of endplate fracture and subsidence after oblique lumbar interbody fusion for adult spinal deformity

BACKGROUND

Recently, Oblique lumbar interbody fusion (OLIF) is commonly indicated to correct the sagittal and coronal alignment in adult spinal deformity (ASD). Endplate fracture during surgery is a major complication of OLIF, but the detailed location of fracture in vertebral endplate in ASD has not yet been determined. We sought to determine the incidence and location of endplate fracture and subsidence of the OLIF cage in ASD surgery, and its association with fusion status and alignment.

METHODS

We analyzed 75 levels in 27 patients were analyzed using multiplanar CT to detect the endplate fracture immediately after surgery and subsidence at 1 year postoperatively. The prevalence was compared between anterior and posterior, approach and non-approach sides, and concave and convex side. Their association with fusion status, local and global alignment, and complication was also investigated.

RESULTS

Endplate fracture was observed in 64 levels (85.3%) in all 27 patients, and the incidence was significantly higher in the posterior area compared with the anterior area (85.3 vs. 68.0%, p=0.02) of affected vertebra in the sagittal plane. In the coronal plane, there was no significant difference in incidence between left (approach) and right (non-approach) sides (77.3 and 81.3%, respectively), or concave and convex sides (69.4 and 79.6%) of wedged vertebra. By contrast, cage subsidence at 1 year postoperatively was noted in 14/75 levels (18.7%), but was not associated with endplate fracture. Fusion status, local and global alignment, and complications were not associated with endplate fracture or subsidence.

CONCLUSION

Endplate fracture during OLIF procedure in ASD cases is barely avoidable, possibly induced by the corrective maneuver with ideal rod counter and cantilever force, but is less associated with subsequent cage subsidence, fusion status, and sustainment of corrected alignment in long fusion surgery performed even for elderly patients.