Reinforcing the Mucoperiosteal Pocket with the Scarpa Fascia Graft in Secondary Alveolar Bone Grafting: A Retrospective Controlled Outcome Study

Evaluation of a high-fidelity cleft alveolar bone graft simulator

INTRODUCTION

Cleft alveolar bone graft surgery is technically challenging to perform as well as difficult to learn and teach. A high-fidelity cleft alveolar bone graft simulator was previously developed. However, further evaluation of the simulator is necessary to assess its efficacy.

METHODS

Two cleft simulation workshops were conducted in which participants were led through a simulated cleft alveolar bone graft. The first simulation workshop involved six plastic surgery trainees. The second workshop involved 43 practicing cleft surgeons. The participants were provided with a Likert-type questionnaire assessing the simulators' features, realism, and value as a training tool. The change in self-reported confidence was assessed by providing each participant with a pre- and post-simulation confidence questionnaire.

RESULTS

There was overall agreement in the realism of the simulators' features (average score of 4.67 and 3.80 out of 5 for the trainees and surgeons, respectively). There was overall agreement to strong agreement in the simulators value as a training tool (average score of 5 and 4.43 out of 5 for the trainees and surgeons, respectively). The self-reported confidence increased for all questionnaire items for both the trainees and surgeons. This was significant (p < 0.05) for five out of eight and all questionnaire items for the trainees and surgeons, respectively. The magnitude of the confidence increase was generally greater for less experienced participants.

CONCLUSION

The cleft alveolar bone graft simulator was found to be realistic and valuable as a training platform. Use of the simulator improved self-reported confidence in cleft alveolar bone graft surgery.

Three-Dimensional Comparative Changes in the Pharyngeal Airway of Patients with Cleft after Two-Jaw Orthognathic Surgery

BACKGROUND

The present study evaluated the three-dimensional changes of the pharyngeal airway after orthognathic surgery (OGS) in patients with unilateral and bilateral clefts, and in unilateral cleft patients with and without pharyngeal flap (PF).

METHODS

Forty-five patients with unilateral or bilateral clefts undergoing OGS were enrolled. Cone-beam computed tomographic images were obtained before and after OGS. We measured the pharyngeal airway volumes, minimal cross-sectional area, and the horizontal displacement of facial landmarks.

RESULTS

The patients with bilateral cleft exhibited smaller initial velopharyngeal volume (unilateral, 8623 mm 3 ; bilateral, 7781 mm 3 ; P = 0.211), whereas the velopharyngeal volume increased significantly with a median of 744 mm 3 after OGS ( P = 0.031). The median horizontal displacement of A point was 2.9 and 2.6 mm among the patients with unilateral and bilateral clefts, respectively ( P = 0.276), and the median horizontal displacement of B point was -2.9 and -3.3 mm among patients with unilateral and bilateral clefts, respectively ( P = 0.618). The unilateral cleft patients with PF exhibited lower initial velopharyngeal volume (patients with a history of PF surgery, 7582 mm 3 ; patients without a history of PF surgery, 8756 mm 3 ; P = 0.129) and a lower increase in velopharyngeal volume (patients with a history of PF surgery, 437 mm 3 ; patients without a history of PF surgery, 627 mm 3 ; P = 0.739) after OGS.

CONCLUSIONS

Midface hypoplasia and the decrease in the velopharyngeal volume were more prominent among the bilateral cleft patients and the unilateral cleft patients with PF. After OGS, the velopharyngeal volume increased considerably among the bilateral cleft patients, but no considerable differences were noted among the unilateral cleft patients with PF.

CLINICAL QUESTION/LEVEL OF EVIDENCE

Risk, II.

Physical properties of Scarpa's fascia

Preservation of Scarpa's fascia has improved clinical outcomes in abdominoplasty procedures and in other body contour surgeries. However, the physical properties of Scarpa's fascia have not yet been described, and grafts are still underexplored. Fresh surgical specimens from five female patients subjected to classical abdominoplasty were dissected and analyzed. A grid was drawn on the fascia surface, dividing it into equal upper and lower halves; four Scarpa's fascia samples (30 × 10 mm) were collected from each half, 40 mm apart. The thickness was measured with a caliper. A strain/stress universal testing machine was used for mechanical tests. Twenty-five samples were obtained (nine from the upper half, 16 from the lower). The average thickness was 0.56 ± 0.11 mm. The average values for stretch, stress, strain, and Young's Modulus were, respectively, 1.436, 4.198 MPa, 43.6%, and 23.14 MPa. The upper half showed significantly greater thickness and strain values (p = 0.020 and p = 0.048; Student's t-test). The physical and biomechanical properties of Scarpa's fascia can make it a donor area for fascial grafts as an alternative to fascia lata, as it is always available and has minimal donor-site morbidity. Further studies are needed to validate this statement. It seems advantageous to use the lower half of the abdomen instead of the upper part as a donor site.

Residual calcified material volume of β-tricalcium phosphate with platelet-rich fibrin in unilateral alveolar bone graft

BACKGROUND

This study aimed to evaluate the effectiveness of β-tricalcium phosphate (β-TCP) and platelet-rich fibrin (PRF) in unilateral alveolar bone graft, involving the percentage of residual calcified material and the average labiopalatal thickness of the grafts on cone beam computed tomography at 6 months after surgery, comparing two age groups 12 years and under and over 12 years old.

RESULTS

The mean preoperative defect volume was 0.93 ± 0.20 cm3, with no significant difference between the two groups (p = 0.652). In the postoperative period, we did not record any abnormal bleeding and no infection was observed. Six months after surgery, the mean percentage of residual calcified material was 63.53 ± 16.48% with a significantly higher difference in the age group 12 and under (p < 0.001), and the mean average labiopalatal thickness of the grafted bone was 5.72 ± 1.09 mm with a significantly higher difference in the age group 12 and under (p = 0.011).

CONCLUSION

Using β-TCP and PRF in alveolar bone graft surgery has acceptable effectiveness clinically and on CBCT images, with significantly higher differences of the percentage of residual calcified material and the average labiopalatal thickness of the grafted bone in the group 12 years old and younger than in the older group.

The First Alveolar Bone Graft Simulator

Alveolar bone graft (ABG) surgery in cleft patients is technically challenging. The procedure requires design, dissection and release of soft tissue flaps to create a seal around the bone graft. In addition, visualization during the procedure is challenging within the confines of the cleft. These features make ABG surgery difficult to learn and teach, and it is, therefore, a suitable procedure for the use of a simulator. A high-fidelity cleft ABG simulator was developed using three-dimensional printing, polymer, and adhesive techniques. Simulated ABG surgery was performed by two expert cleft surgeons for a total of five simulation sessions to test the simulator's features and the ability to perform the critical steps of an ABG. ABG surgery was successfully performed on the simulator. The simulations involved interacting with realistic dissection planes as well as multi-layered synthetic soft (periosteum, mucosa, gingiva, adipose tissue) and hard (teeth, bone) tissue. The simulator allowed performance of cleft marginal incisions, dissection, and elevation of a muco-gingival-periosteal flap, creation of nasal upturned and palatal downturned flaps, nasal and palatal side closure, insertion of simulated bone graft material, and advancement of the muco-gingival-periosteal flap for closure of the anterior wall of the cleft. The ABG simulator allowed performance of the critical steps of ABG surgery. This is the first ABG simulator developed, which incorporates the features necessary to practice the procedure from start to finish.

Analysis of Superficial Subcutaneous Fat Camper's and Scarpa's Fascia in a United States Cohort

Together, the Camper's and Scarpa's fasciae form the superficial fat layer of the abdominal wall. Though they have clinical and surgical relevance, little is known about their role in body composition across diverse patient populations. This study aimed to determine the relationship between patient characteristics, including sex and body mass index, and the distribution of Camper's and Scarpa's fascial layers in the abdominal wall. A total of 458 patients' abdominal CT examinations were segmented via CoreSlicer 1.0 to determine the surface area of each patient's Camper's, Scarpa's, and visceral fascia layers. The reproducibility of segmentation was corroborated by an inter-rater analysis of segmented data for 20 randomly chosen patients divided between three study investigators. Pearson correlation and Student's t-test analyses were performed to characterize the relationship between fascia distribution and demographic factors. The ratios of Camper's fascia, both as a proportion of superficial fat (r = -0.44 and p < 0.0001) and as a proportion of total body fat (r = -0.34 and p < 0.0001), showed statistically significant negative correlations with BMI. In contrast, the ratios of Scarpa's fascia, both as a proportion of superficial fat (r = 0.44 and p < 0.0001) and as a proportion of total body fat (r = 0.41 and p < 0.0001), exhibited statistically significant positive correlations with BMI. Between sexes, the females had a higher ratio of Scarpa's facia to total body fat compared to the males (36.9% vs. 31% and p < 0.0001). The ICC values for the visceral fat, Scarpa fascia, and Camper fascia were 0.995, 0.991, and 0.995, respectively, which were all within the 'almost perfect' range (ICC = 0.81-1.00). These findings contribute novel insights by revealing that as BMI increases the proportion of Camper's fascia decreases, while the ratio of Scarpa's fascia increases. Such insights expand the scope of body composition studies, which typically focus solely on superficial and visceral fat ratios.

Long-term treatment outcome of patients with complete bilateral cleft lip and palate: a retrospective cohort study

BACKGROUND

Patients with cleft lip and palate have functional and esthetic impairment and typically require multiple interventions in their life. Long-term evaluation following a treatment protocol, especially for patients with complete bilateral cleft lip and palate (BCLP), is important but was rarely reported in the literature.

PATIENTS AND METHODS

A retrospective review was conducted on all patients with complete BCLP born between 1995 and 2002 and treated at our center. Inclusion criteria were having adequate medical records and receiving continuous multidisciplinary team care at least until 20 years of age. Exclusion criteria were lack of regular follow-up and congenital syndromic abnormalities. The medical records and photos were reviewed, and facial bone development was evaluated using cephalometric analysis.

RESULTS

A total of 122 patients were included, with a mean age of 22.1 years at the final evaluation in this study. Primary one-stage cheiloplasty was performed in 91.0% of the patients, and 9.0% underwent two-stage repair with an initial adhesion cheiloplasty. All patients underwent two-flap palatoplasty at an average of 12.3 months. Surgical intervention for velopharyngeal insufficiency was required in 59.0% of patients. Revisional lip/nose surgery was performed in 31.1% during growing age and in 64.8% after skeletal maturity. Orthognathic surgery was applied in 60.7% of patients with retruded midface, of which 97.3% underwent two-jaw surgery. The average number of operations to complete the treatment was 5.9 per patient.

CONCLUSION

Patients with complete BCLP remain the most challenging group to treat among the cleft. This review revealed certain suboptimal results, and modifications have been made to the treatment protocol. Longitudinal follow-up and periodic assessment help to establish an ideal therapeutic strategy and improve overall cleft care.

Effect of body mass index on progressive bone mineral density in patients with cleft after secondary alveolar bone grafting

BACKGROUND

Although childhood obesity matters, the association between body mass index (BMI) and bone mineral density (BMD) progression in grafted tissue after secondary alveolar bone grafting (ABG) for children with cleft alveolus is scarcely studied. Accordingly, this study explored the influence of BMI on BMD progression after ABG.

METHODS

In total, 39 patients with cleft alveolus receiving ABG at the mixed dentition stage were enrolled. Patients were classified as underweight, normal weight, or overweight or obese according to age- and sex-adjusted BMI. BMD was measured in Hounsfield units (HU) from cone-beam computed tomography scans obtained 6 months (T1) and 2 years (T2) postoperatively. Adjusted BMD (HU_{grafted tissue}/HU_pogonion, BMD_a) was used for further analysis.

RESULTS

For underweight, normal-weight, and overweight or obese patients, BMD_aT1 values were 72.87%, 91.85%, and 92.89%, respectively (p = 0.727); BMD_aT2 values were 111.49%, 112.57%, and 113.10% (p = 0.828); and density enhancement rates were 29.24%, 24.61%, and 22.14% (p = 0.936). No significant correlation was observed between BMI and BMD_aT1, BMD_aT2, or density enhancement rates (p = 0.223, 0.156, and 0.972, respectively). For patients with BMI < 17 and ≥ 17 kg/m², BMD_aT1 values were 89.80% and 92.89%, respectively (p = 0.496); BMD_aT2 values were 111.49% and 113.10% (p = 0.216); and density enhancement rates were 23.06% and 26.39% (p = 0.573).

CONCLUSION

Patients with different BMI values had similar outcomes (BMD_aT1, BMD_aT2, or density enhancement rate) after our ABG procedure in the 2-year postoperative follow-up.

Favorable Transverse Maxillary Development after Covering the Lateral Raw Surfaces with Buccal Fat Flaps in Modified Furlow Palatoplasty: A 3D Imaging-Assisted Long-Term Comparative Outcome Study

BACKGROUND

The pedicled buccal fat flap has recently been applied to cover the lateral raw surfaces during palatoplasty as an attempt to mitigate scar-induced transverse maxillary constriction during growth, but with no formal long-term comparative analysis. This 3D imaging-assisted study assessed its impact on posterior transverse maxillary development.

METHODS

Cone beam computerized tomography scans from patients with unilateral cleft lip, alveolus and palate who received buccal fat flap (buccal fat group; n=22) or Surgicel (Surgicel group; n=32) for covering lateral raw surfaces during modified Furlow palatoplasty at 9-10 months old and had reached 9 years old were retrieved for analysis. Patients with unilateral cleft lip and alveolus (non-palatoplasty group; n=24) were also included for comparison. Using 3D maxillary image models, linear (U6T-MSP and U6J-MSP) and area measurements were calculated for cleft and non-cleft posterior maxillary sides as well as for total posterior transverse maxillary dimension.

RESULTS

The buccal fat group had significantly (all p<0.05) wider dimensions compared with the Surgicel group for all transverse maxillary measurements on both the cleft and non-cleft sides, with exception for U6J-MSP and posterior palatal area parameters on the cleft side (p>0.05). The buccal fat group had significantly (all p<0.05) wider total transverse maxillary dimensions compared with Surgicel and non-palatoplasty groups.

CONCLUSION

Covering the lateral raw surfaces with buccal fat flaps resulted in less posterior transverse maxillary constriction compared with the Surgicel-based covering procedure.

Secondary Alveolar Bone Grafting in Patients with Cleft Lip and Palate: A Step-by-Step Video Series

SUMMARY

Secondary alveolar bone grafting is one of the key surgical procedures performed to restore dental arch continuity and facilitate tooth eruption in patients with cleft lip and palate. Harvest of cancellous bone graft from the iliac crest has become the gold standard; however. there is no consensus regarding the ideal technique. An optimal bone harvest technique must be aimed at producing minimal donor-site morbidity and patient discomfort. The success of the bone grafting procedure depends largely on the surgical technique. To restore cleft alveolar defects, one must be able to conceptualize the different underlying aspects of the problem to perform an effective surgical repair. It is important for surgeons-in-service to adopt newer techniques that significantly enhance the overall outcome. This article describes two techniques of iliac bone harvest and the principles involved in execution of the alveolar bone grafting procedure. The accompanying four-part video series depicts the bone harvest, flap design, dissection of the recipient cleft alveolus, and bone grafting in a step-by-step manner.

Progressive Comparison of Density Assessment of Alveolar Bone Graft in Patients with Unilateral and Bilateral Cleft

(1) Background: Continuing to observe the grafted bone mineral density (BMD) is essential to ensure the success of alveolar bone grafting (ABG) in patients with cleft lip and palate. This study elaborates on three methods that can be used to evaluate the progressive BMD. (2) Methods: Forty patients with unilateral or bilateral clefts receiving ABG were enrolled. Cone beam computed tomography (CBCT) scans were taken at 6 months (T1) and 2 years (T2) postoperatively. In CBCT, measurements were obtained on three different planes using the circle located 1 mm from the adjacent teeth (Method A), the largest circle within the defect (Method B), or the central circle with a diameter of 2 mm (Method C). The BMD was the average density of the three planes and was adjusted by pogonion density. Bland–Altman plots were used to evaluate the agreement of each method. Inter-rater reliability was confirmed by the intraclass correlation coefficient (ICC). (3) Results: For Method A, B, and C, the mean-adjusted BMD (BMD/pogonion density, BMD_a) was 17.44%, 17.88%, and 17.69%, respectively, at T1 (p = 0.495), and 22.51%, 22.87%, and 22.74%, respectively, at T2 (p = 0.690); the density enhancement rates were 40.54%, 38.92%, and 43.15% (p = 0.382). Significant differences between the BMD_a at T1 and T2 were observed (p < 0.001, <0.001, and 0.001, for Method A, B, and C, respectively). The volume of the grafted tissue remained stable during T1 and T2, and no significant correlation between density enhancement rate and volume loss was observed. (4) Conclusions: A significant increase in the BMD of grafted tissue was observed in the 2-year postoperative follow-up. The three methods for measuring BMD_a via CBCT can be applied in post-ABG evaluations.

Cheek soft tissue prediction in cleft orthognathic surgery: A 3D computer-assisted investigation with comparative analysis

BACKGROUND

The Le Fort I maxillary advancement and rotational movement have been adopted to treat patients with cleft-related skeletal Class III pattern and anteromedial cheek soft tissue deficiency, but cleft-specific cheek soft tissue prediction data are insufficient. This 3D imaging-based study addressed the issue.

METHODS

3D craniofacial soft tissue and bone models were created from 32 consecutive patients who received computer-aided two-jaw orthognathic surgery for the correction of cleft-related Class III deformity and cheek soft tissue deficiency. Using superimposed 3D models, the cheek volumetric change, the cheek sagittal movement, and the 3D cheek mass position were calculated. 3D data from orthognathic surgery-treated patients with no cleft (noncleft cohort) and individuals with no facial deformity (3D norm value) were retrieved for comparative analysis.

RESULTS

Surgical maxillary advancement (p < 0.001) but not maxillary clockwise rotation (p > 0.05) had a significant impact on the cheek soft tissue change, with prediction models showing that maxillary advancement elucidated 77 and 79% of this change on the cleft and noncleft sides, respectively. Cleft cohort (0.46±0.12) had a significantly (p < 0.001) smaller cheek soft-to-hard tissue ratio than that of the noncleft cohort (0.73±0.13). Cleft maxillary advancements >4 mm resulted in a 3D cheek mass position (2.1±1.1 mm) similar (p > 0.05) to the 3D norm value (2.2±1.2 mm), but different (p = 0.037) from the noncleft cohort (2.38±0.7 mm).

CONCLUSION

This study showed that maxillary advancement but not the maxillary rotation affects the cheek soft tissue change, and the predictive values and comparative data could assist the orthodontist-surgeon interaction during preoperative planning and patient counseling.

Management of Oronasal Fistulas in Patients With Cleft Lip and Palate

BACKGROUND

The oronasal fistula in cleft patients is one of the complications that can be found after primary surgeries due to a failure of healing of the surgical repair that causes the communication between the oral and nasal cavities. A number of procedures can be implemented to correct the fistula and it is not clear if a particular technique is the best to be recommended.

OBJECTIVE

This study aims to systematically analyze the scientific evidence regarding the treatment of oronasal fistulas located in the lingual-alveolar and labial-alveolar regions in patients with cleft lip and palate who have undergone primary surgeries.

MATERIAL AND METHODS

A bibliographic search of articles published until September 2018 without restricted year and language of publication, in PubMed (Medline), Scopus, Cochrane, Web of science, and BVS databases. The MeSHterms "Fistula," "Oral Fistula," and "Cleft Lip" were used, which were related to each other and with other keywords related to the subject of the review through the "OR" and "AND" operators. The quality of the publications was evaluated according to the guidelines of the Methodological Index for Nonrandomized Studies.

RESULTS

After applying the eligibility criteria, a total of 18 articles were selected for the extraction of data and qualitative analysis.

CONCLUSION

All publications analyzed in this review reported the fistula treatment at the same surgical time as the bone graft, independently of the donor area, the type of cleft treated and the patient's age at operation. There was no consensus among the studies on the best treatment type for oronasal fistulas located in the alveolar region, and further comparative studies between the existing techniques will be necessary to address this question.

A Surgical and Educational Video of the Inferior Turbinate Mucosal Flap for the Nasal Floor and Intraoral Reconstruction in Unilateral Complete Cleft Lip Repair

Since the original description of Millard rotation advancement principle for cleft lip repair, many important contributions have subsequently been described by other surgeons worldwide. However, the reconstruction of the nasal floor and intraoral lining has received less attention over time. This article demonstrates a modified unilateral complete cleft lip repair using the rotation advancement principle plus multipurpose inferior turbinate mucosal flap. The accompanying videos display the 10 key steps for rationale, design, and proper execution of the inferior turbinate mucosal flap for the nasal floor and intraoral reconstruction.

Osteogenic potential of induced pluripotent stem cells from human adipose-derived stem cells

BACKGROUND

Bone regeneration is a crucial and challenging issue in clinical practice. Bone tissue engineering (BTE) with an optimal cell source may provide an ideal strategy for the reconstruction of bone defects. This study examined whether induced pluripotent stem cells (iPSCs) derived from adipose-derived stem cells (ASCs) could act as an osteogenic substitute and whether these ASC-iPSCs yield more new bone formation than ASCs in hydrogel scaffolds.

METHODS

ASC-iPSCs were reprogrammed from ASCs through a retroviral system. ASCs were harvested and isolated from adipose tissue of humans. An aliquot of cell suspension (1 × 106 cells/mL) was seeded directly onto the nHAP-gelatin cryogel scaffolds. Nude mice back implantation of cell-seeded scaffolds was designed for in vivo comparison of osteogenic potentials between ASCs and ASC-iPSCs. Samples were harvested 4 and 8 weeks after implantation for further analysis based on histology and RT-PCR.

RESULTS

ASC-iPSCs were successfully obtained from human adipose-derived stem cells. PCR results also showed that specific genes of iPSCs with the ability to cause the differentiation of cells into the three germ layers were expressed. In our in vivo experiments, iPSCs were subcutaneously injected into nude mice to induce teratoma formation. The morphology of the three germ layers was confirmed by histological staining. ASC is an essential cell source for BTE with benefits of high volume and less-invasive acquisition. With additional transforming Yamanaka factors, ASC-iPSCs showed higher osteogenic differentiation and elevated expression of collagen type I (Col I), osteocalcin (OCN), alkaline phosphate (ALP), and runt-related transcription factor 2 (RunX-2).

CONCLUSIONS

This report suggests that ASC-iPSCs could be a superior cell source in BTE with better osteogenic differentiation efficacy for future clinical applications.

Comparative Volume Analysis of Alveolar Defects by 3D Simulation

A precise volumetric assessment of maxillary alveolar defects in patients with cleft lip and palate can reduce donor site morbidity or allow accurate preparation of bone substitutes in future applications. However, there is a lack of agreement regarding the optimal volumetric technique to adopt. This study measured the alveolar bone defects by using two cone-beam computed tomography (CBCT)-based surgical simulation methods. Presurgical CBCT scans from 32 patients with unilateral or bilateral clefts undergoing alveolar bone graft surgery were analyzed. Two hands-on CBCT-based volumetric measurement methods were compared: the 3D real-scale printed model-based surgical method and the virtual surgical method. Different densities of CBCT were compared. Intra- and inter-examiner reliability was assessed. For patients with unilateral clefts, the average alveolar defect volumes were 1.09 ± 0.24 and 1.09 ± 0.25 mL (p > 0.05) for 3D printing- and virtual-based models, respectively; for patients with bilateral clefts, they were 2.05 ± 0.22 and 2.02 ± 0.27 mL (p > 0.05), respectively. Bland–Altman analysis revealed that the methods were equivalent for unilateral and bilateral alveolar cleft defect assessment. No significant differences or linear relationships were observed between adjacent different densities of CBCT for model production to obtain the measured volumes. Intra- and inter-examiner reliability was moderate to good (intraclass correlation coefficient (ICC) > 0.6) for all measurements. This study revealed that the volume of unilateral and bilateral alveolar cleft defects can be equally quantified by 3D-printed and virtual surgical simulation methods and provides alveolar defect-specific volumes which can serve as a reference for planning and execution of alveolar bone graft surgery.

Persistent symptomatic anterior oronasal fistulae in patients with Veau type III and IV clefts: A therapeutic protocol and outcomes

BACKGROUND

The anterior oronasal fistulae neighboring the alveolar cleft could persist or reappear after the alveolar reconstruction with cancellous bone grafting. The persistent symptomatic anterior oronasal fistulae need to be repaired, but surgery remains a challenge in cleft care. Surprisingly, this issue has rarely been reported in the literature. The purpose of this long-term study was to report a single surgeon experience with a therapeutic protocol for persistent symptomatic anterior oronasal fistula repair.

METHODS

This is a retrospective study of consecutive patients with Veau type III and IV clefts and persistent symptomatic anterior oronasal fistulae managed according to a therapeutic protocol from 1997 to 2018. Depending on fistula size, patients were treated with local flaps associated with an interpositional graft or two-stage tongue flaps (small/medium or large fistulae, respectively). The surgical outcomes were classified as "good" (complete fistula closure with no symptoms), "fair" (asymptomatic narrow fistula remained), or "poor" (failure with persistent symptoms).

RESULTS

Forty-four patients with persistent symptomatic anterior oronasal fistulae were reconstructed with local flaps associated with interpositional fascia or dermal fat grafting (52.3%) or two-stage tongue flaps (47.7%). Most of patients (93.2%) presented "good" outcomes, ranging from 87% to 100% (local and tongue flaps, respectively). Three (6.8%) patients presented symptomatic residual fistula ("poor" outcomes).

CONCLUSIONS

For the repair of persistent symptomatic anterior oronasal fistulae, this therapeutic protocol provided satisfactory outcome with low fistula recurrence rate.