Optimal timing for nasal cartilage molding in presurgical nasoalveolar molding

The Effectiveness of Preoperative Correction Techniques in Improving Nasal Deformity in Children With Unilateral Complete Cleft Lip and Palate

OBJECTIVE

Unilateral complete cleft lip and palate (UCCLP) is associated with apparent nasal deformities before the cheilorrhaphy. The aim of this study was to determine whether preoperative correction techniques are effective in the treatment of nasal deformities in infant with unilateral UCCLP used by the systematic review and meta-analysis.

METHODS

We searched Medline, Cochrane Library, EMBASE, PubMed, and Chinese BioMedical Literature Database (CBM) until January 31, 2019, to identify studies that compared the effectiveness of preoperative correction techniques in the treatment of nasal deformities in infant with UCCLP. Two authors individually extracted the data and performed the quality assessments. The height of nasal columella, the width of the affected side nasal ala and the inclination of the nasal columella were evaluated.

RESULTS

Seven articles were incorporated into the systematic review, and 5 (274 participants) in the meta-analysis according to the inclusion criteria. The preoperative correction could increase the height of nasal columella in children with UCCLP [SMD: 2.64 mm; 95% confidence intervals (CI); (1.35 mm, 3.94 mm); P < 0.0001]. Moreover, the preoperative correction resulted in reduced width of the affected side nasal ala [SMD: -5.14 mm; 95% CI; (-8.96 mm, -1.31 mm); P = 0.008]; However, the evidence was insufficient to determine a significant effect on the inclination of the nasal columella [SMD: -3.48 degrees; 95% CI; (-7.56 degrees, 0.59 degrees); P = 0.09].

CONCLUSIONS

Preoperative correction for children with UCCLP can increase the height of nasal columella, reduce the width of the affected side nasal ala, improve the nasal symmetry, and reduce nasal deformity, however, no significant effect could be observed for the inclination of the nasal columella.

NAM-help or burden? Intercultural evaluation of parental stress caused by nasoalveolar molding: a retrospective multi-center study

Objectives

Nasoalveolar molding (NAM) was developed to facilitate easier treatment and better outcomes for cleft lip and palate (CLP) patients. The aim of this study was to investigate the parental burden and possible intercultural differences of this treatment modality, which is often argued to burden parents to an extraordinary amount.

Materials and methods

Standardized questionnaires (available in English, Mandarin, and German) with 15 non-specific and 14 NAM-specific items to be retrospectively answered by Likert scales by parents of unilateral CLP patients with completed NAM treatment.

Results

The parents of 117 patients from two treatment centers in Taiwan and Germany were included. A very high level of overall satisfaction was found in both countries with significant intercultural differences in prenatal parent information, feeding problems, dealing with 3rd party’s perception, and experienced personal effort.

Conclusion

NAM is an effective treatment tool for children’s CLP deformities and their caregivers in overcoming the feeling of helplessness. Intercultural differences may be due to infrastructural reasons, cultural attitudes and habits, or different public medical education.

Clinical relevance

In addition to facilitating easier surgical treatment, NAM can be seen as a powerful coping strategy for parents dealing with a CLP deformity of their child and does not seem to burden them extraordinarily.

The Effect of Immediate Versus Delayed Addition of the Nasal Stent to the Nasoalveolar Molding Plate on Nostrils Shape and Cleft Width in Infants With Unilateral Cleft Lip and Palate

OBJECTIVE

The main aim of this study was to evaluate the effect of immediate versus delayed addition of the nasal stent to the nasoalveolar molding plate on the nose shape and alveolar cleft area in unilateral cleft lip and palate infants.

METHOD

Twenty nonsyndromic newborn infants with unilateral cleft lip and palate were scanned 3 dimensionally using Proface software. In the experimental group, the nasal stent was added on the day the molding plate arrived, and in the control group when the alveolar gap reached 5 mm. Two months after adding nasal stents in each group patients' faces were scanned again and some parameters were measured. In addition, immediately after treatment, 1 month later and at the end of investigation, impressions were taken, and stone casts were scanned by cone-beam computed tomography and the alveolar gap was measured. Fisher exact test, paired t test, and ANOVA were used for data analyses. P < 0.05 was considered as significant.

RESULTS

In this study, changes in the parameters showed significant differences between the case and controls for the columellar angle, nostril width on the cleft side, nostril height on the cleft side, soft tissue cleft width, and nasal surface area. However, the nostril's width and height in the noncleft side, intercommissural distance, nasal surface area on the noncleft side, nostril area between the cleft and noncleft side after treatment, and the alveolar gap did not show significant differences between the groups (P > 0.05).

CONCLUSION

Early use of nasal stents showed more desirable results in decreasing the width of the nostrils and increasing its height and correcting the angle of the columella without any adverse effects on the nostrils after treatment.

Nasoalveolar Molding Therapy for the Treatment of Unilateral Cleft Lip and Palate Improves Nasal Symmetry and Maxillary Alveolar Dimensions

OBJECTIVE

The aim of this study is to assess the esthetic and morphologic outcomes before surgery using nasoalveolar molding (NAM) therapy in children with unilateral cleft lip and palate.

DESIGN

A prospective analysis was performed.

SETTING

The study was carried out in the Congenital Malformations Craniofacial and Cleft Lip and Palate Unit, Hospital Virgen de las Nieves, Andalusian Health Service, Granada (Spain).

PATIENTS

Twenty consecutively enrolled infants ranging in age from 7 to 30 days with nonsyndromic unilateral cleft lip and palate treated from 2008 to 2012.

INTERVENTIONS

All patients were treated with NAM appliances to align the alveolar segments and reduce severity of the nasal deformity.

MAIN OUTCOME MEASURE

The extraoral nasal measurements were performed on casts and nasal photographs. The measurements consisted of bialar width (BAW), columellar deviation (CD), cleft nostril height (CNH), cleft nostril width (CNW), non-CNH, non-CNW, and the deviation of the columella to the horizontal line represented by bilateral pupil line (BIA). The authors have made the measurements following Barilla method. Also 2 intraoral measurements were taken.

RESULTS

Following NAM the extraoral records showed a statistically significant decrease in CD (P < 0.0001), CNW (P < 0.0001), and BAW (P < 0.001). Furthermore, statistically significant increases in CNH (P < 0.05) and BIA (P < 0.0001) were observed.Following Barilla measurements, the authors have found a high percentage of symmetry in all the nasal measurements after the NAM therapy.Intraoral results showed a statistically significant decrease in the gap between the greater and lesser alveolar segments and a statistically significant increase in maxillary arch width.

CONCLUSIONS

Nasoalveolar molding improves nasal symmetry and achieves an improvement of all maxillary alveolar dimensions, increasing alveolar rim width, reducing the size of alveolar cleft gap, and improving shape of the maxillary dental arch. As a consequence of reducing the alveolar and nasal deformities before surgery, it is expected that the primary repair will be easier for the surgeon and more successful.

Initial experiences with NAM-assisted primary repair of the BCLP deformity

BACKGROUND

Primary surgical repair of the bilateral cleft lip and palate (BCLP) deformity is challenging. Infant Orthopedic (IO) procedures are often used to assist surgical reconstruction of normal anatomy. Nasoalveolar molding (NAM) is a presurgical infant orthopedic procedure that attempts to reduce the cleft nasal deformity, in addition to the lip and alveolus, leading to an esthetic primary surgical repair.

OBJECTIVE

NAM provides the surgical team with a better foundation for an easier and more esthetic single stage repair at the level of nose in addition to the lip and alveolus.

METHOD

Infant nasal cartilages are amenable to correction with NAM in the first few weeks of infancy when they retain their plasticity. NAM-assisted surgical repair of a complete BCLP infant is discussed. Postoperatively nasal stents were used to retain results and minimize relapse.

RESULTS

NAM helped correct premaxillary deviation and protrusion, reduce alveolar cleft width and improve the nasal morphology prior to surgery in the BCLP infant.

CONCLUSIONS

NAM helped reduce the severity of the cleft deformity in the BCLP infant and facilitated an easier and esthetic single stage primary surgical repair.

RapidNAM: generative manufacturing approach of nasoalveolar molding devices for presurgical cleft lip and palate treatment

Nasoalveolar molding (NAM) is an accepted treatment strategy in presurgical cleft therapy. The major drawbacks of the treatment listed in the literature relate to the time of the treatment and the coordination of the required interdisciplinary team of therapists, parents, and patients. To overcome these limitations, we present the automated RapidNAM concept that facilitates the design and manufacturing process of NAM devices, and that allows the virtual modification and subsequent manufacture of the devices in advance, with a growth prediction factor adapted to the patient’s natural growth. The RapidNAM concept involves (i) the prediction of three trajectories that envelope the fragmented alveolar segments with the goal to mimic a harmonic arch, (ii) the extrusion from the larger toward the smaller alveolar segment along the envelope curves toward the harmonic upper alveolar arch, and (iii) the generation of the NAM device with a ventilation hole, fixation pin, and fixation points for the nasal stents. A feasibility study for a vector-based approach was successfully conducted for unilateral and bilateral cleft lip and palate (CLP) patients. A comparison of the modified target models with the reference target models showed similar results. For further improvement, the number of landmarks used to modify the models was increased by a curve-based approach.

Nasoalveolar molding in cleft care--experience in 40 patients from a single centre in Germany

Nasoalveolar molding (NAM) has gained wide acceptance and evidence in cleft therapy. However, standardized treatment protocols and experiences recorded from European centres are lacking. The results of 40 infants with cleft lip and palate treated with presurgical NAM according to the Grayson technique were analyzed. Standardized parameters of cleft width and nasal symmetry were measured in pre- and posttreatment plaster casts and in digitalized 3-dimensional STL models. Statistical analyses were performed by using Student´s t-test in a per-protocol manner. 27 out of 40 infants completed NAM and were analyzed. In 13 patients NAM was either temporarily interrupted or terminated prematurely due to skin irritations or lack of parental support. These cases were excluded from statistical analysis, resulting in a drop-out rate of 32.5%. Intersegmental alveolar distance (ISAD), intersegmental lip distance (ISLD), nostril height (NH), nostril width (NW) and columella deviation angle (CDA) were significantly changed in unilateral cleft lip and palate (UCLP) (n = 8). In unilateral cleft lip (UCL) (n = 9), only ISLD, NH and CDA were significantly changed. ISAD of the right and left side, ISLD of the right and left side, premaxilla deviation angle, nostril height and columella length were changed significantly in bilateral cleft lip and palate (BCLP) cases (n = 10). NAM is a suitable presurgical treatment modality. A positive effect has been seen in UCLP and BCLP infants, as compared with their birth status.

Impression technique for monitoring and virtual treatment planning in nasoalveolar moulding

We describe our experience with various silicone materials for making one-step and two-step impressions of the cleft-lip-palate-nose complex during nasoalveolar moulding. Our technique is superior to common alginate-based impression techniques, as it provides precise reproduction of the complex anatomy of the cleft, and is compatible with the latest available methods of planning treatment with nasoalveolar moulding, such as computer-aided reverse engineering and rapid prototyping.

A comparison of results using nasoalveolar moulding in cleft infants treated within 1 month of life versus those treated after this period: development of a new protocol

The objectives of this study were to: evaluate the effects of nasoalveolar moulding (NAM) in complete unilateral cleft lip and palate infants presenting for treatment at different ages; propose a new NAM protocol in these patients; improve the predictability of NAM. Study groups comprised: group I (n=15) treated with NAM within 1 month of age; group II (n=15) treated with NAM between 1 and 5 months of age.

CONTROL

group III (n=15) comprised of non-cleft 18-month old children. A standard protocol was followed. Patients were evaluated before initiation of NAM, before cheiloplasty and at 18 months. 7 linear anthropometric measurements were compared using dento-facial models. Statistical analysis before and after NAM revealed that group I patients demonstrated 81%, 198%, 69% and 145% improvement in intersegment distance, nasal height, nasal dome height and columella height respectively; whilst group II patients demonstrated 51%, 33%, 21% and 38% improvement for the same. At 18 months, group I patients closely resembled group III patients. This study concluded that the effects of NAM were most significant in group I. Group II patients also benefited from NAM, although to a lesser extent. This study validates the use of NAM in infants presenting late for treatment.

Presurgical presentation of columellar features, nostril anatomy, and alveolar alignment in bilateral cleft lip and palate after infant orthopedics with and without nasoalveolar molding

OBJECTIVES

(1) To evaluate quantitative differences in presurgical presentations of alveolar alignment and nostril anatomy of infants with BCLP treated with nasoalveolar molding (NAM) from those treated with maxillary infant orthopedics only (IO) and (2) to detect interrelationships between presurgical nasoalveolar anatomy, age at lip surgery, age of commencing, and durations of alveolar and nasal molding.

METHODS

A retrospective analysis was conducted on nasal-alveolar measurements and presurgical treatment records of infants with BCLP who received lip repair by a single surgeon in a tertiary-care, referral teaching hospital consecutively from 2000 to 2009 after undergoing NAM (n  =  29; 51 nostrils) or IO (n  =  17; 32 nostrils). Paired t tests analyzed nostril and alveolar symmetry in each group. Intergroup comparisons were made by linear mixed-model regression analyses. Pearson's correlation tests were conducted to detect significant interrelationships within groups.

RESULTS

Significant between-group differences were noted in alveolar irregularity (NAM: 3.58 ± 1.02 mm; IO: 7.31 ± 1.28 mm; p < .01), columellar length (NAM: 2.88 ± 0.27 mm; IO: 1.48 ± 0.34 mm; p < .001), columellar width (NAM: 6.10 ± 0.21 mm; IO: 6.88 ± 0.26 mm; p < .01), columellar length/width ratio (NAM: 0.48 ± 0.05; IO: 0.20 ± 0.07; p < .05), and columellar angle (NAM: 0.98 ± 1.1°; IO: 3.69 ± 1.37°; p < .05). Differences in age of commencing presurgical orthopedics, lip surgery, and treatment durations were not significant. Better-aligned alveolar segments in the NAM group did not statistically correlate with nostril dimensions. Alveolar irregularity and nostril height in the IO group strongly correlated.

CONCLUSIONS

Infants who received NAM had longer columellae and better-aligned alveolar segments than those who received only IO. Other nostril dimensions were not significantly different.

Rhinoplasty for cleft and hemangioma-related nasal deformities

PURPOSE OF REVIEW

To provide a concise review of recent articles on rhinoplasty approaches for cleft nasal deformity and nasal hemangiomas published in 2008-2010.

RECENT FINDINGS

Cleft nasal deformity rhinoplasty approaches have undergone further refinements as well as new development in techniques and surgical principles to minimize recurrent cleft nasal deformities. There is a paucity of studies addressing cleft septal deformity although there appears to be a greater emphasis on functional outcome in cleft rhinoplasty. Complications from primary cleft rhinoplasty and presurgical nasoalveolar molding were also reported. Similarly, nasal hemangioma rhinoplasty approaches have undergone further modifications with open rhinoplasty and subunit approaches gaining wider acceptance.

SUMMARY

There are several new studies that compare different rhinoplasty techniques to determine which approaches offer superior surgical outcomes; however, there needs to be a greater acceptance of objective measurements when assessing surgical results to identify a uniform surgical protocol and technique for both cleft rhinoplasty and nasal hemangiomas.