Dual-Energy Computed Tomography Virtual Noncalcium Technique in Diagnosing Osteoporosis: Correlation With Quantitative Computed Tomography

Quantitative measurements of dual-energy CT parameters in the diagnosis of osteoporosis - a highly sensitive and specific technique: An observational study

With the aging of the population in our society, osteoporosis (OP) has become one of the chronic diseases that seriously threaten the physical health of the elderly, leading to a heavy burden on healthcare. In recent years, with the continuous development of dual-energy CT (DECT) technology, quantitative measurements of DECT parameters, which is highly sensitive to OP, provides accurate results, is convenient and cost-effective, and is expected to be widely used in bone density testing. This study was aimed to explore the value of quantitative measurements of DECT parameters in diagnosing OP, in order to better guide clinical judgments and treatment. A total of 187 patients who underwent dual-energy X-ray and DECT examinations at Tianjin hospital between January 2022 and June 2023 were included as participants in this study. The bone mineral density (BMD) values of the lumbar spine (L1-L4) were determined using dual-energy X-ray absorptiometry. Simultaneously, CT scans of the lumbar spine (L1-L4) were conducted to measure the CT values of contrast media (CM), mixed-energy image CT values (regular CT value [rCT]), calcium concentration (CaD), as well as fat fraction (FF). Pearson correlation analysis was used to examine the relationship between the quantitative measurements of L1 to L4 vertebral bodies obtained from DECT and BMD. The values of CM, rCT, and CaD in the OP group were all lower than those in the non-OP group with statistical significance (P < .001). Conversely, the fat fraction parameter value in the OP group was significantly higher in contrast with the non-OP group (P = .004); there was a positive correlation between CM, rCT, CaD, and BMD values (R = 0.579, P < .001; R = 0.604, P < .001; R = 0.563, P < .001); CM, rCT, and CaD had high diagnostic value for OP, as evidenced by AUCs of 0.935 (95% CI: 0.900-0.971), 0.956 (95% CI: 0.925-0.987), and 0.926 (95% CI: 0.858-0.954), respectively, all with P values < .001. Quantitative measurement of DECT parameters showed a high sensitivity as well as a high specificity in the diagnosis of OP. It is also highly feasible and holds significant clinical diagnostic value, making it a suitable candidate for widespread application.

Correlation between vertebral bone mineral density and multi-level virtual non-calcium imaging parameters from dual-layer spectral detector computed tomography

Background

Virtual non-calcium (VNCa) imaging based on dual-energy computed tomography (CT) plays an increasingly important role in diagnosing spinal diseases. However, the utility of VNCa technology in the measurement of vertebral bone mineral density (BMD) is limited, especially the VNCa CT value at multiple calcium suppression levels and the slope of VNCa curve. This retrospective cross-sectional study aimed to explore the correlation between vertebral BMD and new VNCa parameters from dual-layer spectral detector CT.

Methods

The dual-layer spectral detector CT and quantitative CT (QCT) data of 4 hydroxyapatite (HAP) inserts and 667 vertebrae of 234 patients (132 male and 102 female) who visited a university teaching hospital between April and May 2023 were retrospectively analyzed. The BMD values of 3 vertebrae (T12, L1, and L2) and inserts were measured using QCT, defined as QCT-BMD. The VNCa CT values and the slope λ of the VNCa attenuation curve of vertebrae and inserts were recorded. The correlations between VNCa parameters (VNCa CT value, slope λ) and QCT-BMD were analyzed.

Results

For the vertebrae, the correlation coefficient ranged from -0.904 to 0.712 (all P<0.05). As the calcium suppression index (CaSI) increased, the correlation degree exhibited a decrease first and then increased, with the best correlation (r=-0.904, P<0.001) observed at the index of 25%. In contrast, the correlation coefficient for the inserts remained relatively stable (r=-0.899 to -1, all P<0.05). For the vertebrae, the values of 3 slopes λ (λ1, λ2, and λ3) derived from the VNCa attenuation curve were 6.50±1.99, 3.75±1.15, and 2.04±0.62, respectively. Regarding the inserts, the λ1, λ2, and λ3 values were 11.56 [interquartile range (IQR): 2.40-22.62], 6.68 (IQR: 1.39-13.49), and 3.63 (IQR: 0.75-7.8), respectively. For the vertebrae, all 3 correlation coefficients between 3 slopes λ and QCT-BMD were 0.956 (all P<0.05). For the inserts, the 3 correlation coefficients were 0.996, 0.998, and 1 (all P<0.05), respectively.

Conclusions

A promising correlation was detected between VNCa CT parameters and QCT-BMD in vertebrae, warranting further investigation to explore the possibility of VNCa imaging to assess BMD.

Quantification of bone quality and distribution of the proximal humerus with dual-energy computed tomography

Background

The proximal humerus is a common site of osteoporotic fractures, and bone quality is a predictor of surgical reduction quality. Dual-energy computed tomography (DECT) is assuming an increasingly important role in the quantification of bone mineral density (BMD) due it is ability to perform three-material decomposition. We aimed to analyze the bone quality and distribution of the proximal humerus with DECT quantitatively.

Methods

Sixty-five consecutive patients (average age 49.5±15.2 years; male: female ratio 32:33) without proximal humerus fractures who had undergone DECT were retrospectively selected. The humeral head was divided into 4 regions on a cross section in the medial plane between the greater tuberosity and the surgical neck. The quantitative parameters, including virtual noncalcium (VNCa) value, computed tomography value of calcium (CaCT), computed tomography value of mixed-energy images (regular CT value) (rCT), and relative calcium density (rCaD), were measured. The correlations between the quantitative parameters and age and body mass index (BMI) were analyzed, and the correlations of age, sex, BMI, region of the humeral head, and VNCa value on CaCT were evaluated.

Results

The differences in CaCT, rCT, and rCaD between the 4 regions of proximal humerus were statistically significant (P<0.001), while the difference in VNCa values was not (P=0.688). The calcium concentration (CaCT and rCaD) was the densest in the posteromedial zone. The differences of CaCT, rCT, and rCaD between males and females in the 4 regions of proximal humerus were statistically significant (P<0.05), while those of the posterolateral zone were not (rCT; P>0.05). The differences in VNCa values between males and females were also not significant (P>0.05). Multivariable linear regression analysis indicated that sex, age, BMI, regions, and VNCa were significant (P<0.05) predictors of the CaCT value.

Conclusions

The concentration of calcium was the densest in the posteromedial region of proximal humerus, and the VNCa value of DECT may be used for quantifying the BMD of the proximal humerus.

Dual-Energy CT in Cardiothoracic Imaging: Current Developments

This article describes the technical principles and clinical applications of dual-energy computed tomography (DECT) in the context of cardiothoracic imaging with a focus on current developments and techniques. Since the introduction of DECT, different vendors developed distinct hard and software approaches for generating multi-energy datasets and multiple DECT applications that were developed and clinically investigated for different fields of interest. Benefits for various clinical settings, such as oncology, trauma and emergency radiology, as well as musculoskeletal and cardiovascular imaging, were recently reported in the literature. State-of-the-art applications, such as virtual monoenergetic imaging (VMI), material decomposition, perfused blood volume imaging, virtual non-contrast imaging (VNC), plaque removal, and virtual non-calcium (VNCa) imaging, can significantly improve cardiothoracic CT image workflows and have a high potential for improvement of diagnostic accuracy and patient safety.

Quantitative Study of Vertebral Body and Paravertebral Muscle Degeneration Based on Dual-Energy Computed Tomography: Correlation With Bone Mineral Density

OBJECTIVES

This study aimed to quantify the degeneration of the vertebral body and paravertebral muscles using dual-energy computed tomography (DECT) and study its relationship with osteoporosis.

METHODS

A total of 130 patients with chronic low back pain were included in this study, and DECT scanning of the lumbar region was undertaken prospectively. By placing a standard quantitative computed tomography corrected phantom under the waist during the DECT procedure, bone mineral density (BMD) and the following quantitative parameters were obtained: calcium density (CaD), vertebral fat fraction (VFF), psoas major area, psoas major fat fraction, erector spinalis area, and erector spinalis fat fraction (ESFF). Independent sample t test and 1-way analysis of variance were used between different age-BMD groups. Pearson test was applied to determine correlations for all measurements, and a mathematical model of BMD was established through regression analysis.

RESULTS

Calcium density, VFF, psoas major area, psoas major fat fraction, erector spinalis area, and ESFF were significantly different among the age-BMD groups (P < 0.05), and BMD was significantly correlated with these parameters (P < 0.05). Calcium density, VFF, and ESFF were included in the BMD regression equation: BMD = 69.062 + 11.637 × CaD - 1.018 × VFF - 0.726 × ESFF (R2 = 0.860, F = 125.979, P < 0.001).

CONCLUSIONS

Degeneration of the vertebral body and paravertebral muscles can be quantitatively analyzed using DECT, and CaD, VFF, and ESFF were independent influencing factors of BMD.

Accuracy and applicability of dual-energy computed tomography in quantifying vertebral bone marrow adipose tissue compared with magnetic resonance imaging

Objectives

To evaluate the accuracy of dual-energy computed tomography (DECT) in quantifying bone marrow adipose tissue (BMAT) and its applicability in the study of osteoporosis (OP).

Methods

A total of 83 patients with low back pain (59.77 ± 7.46 years, 30 males) were enrolled. All patients underwent lumbar DECT and magnetic resonance imaging (MRI) scanning within 48 h, and the vertebral fat fraction (FF) was quantitatively measured, recorded as DECT-FF and MRI-FF. A standard quantitative computed tomography (QCT) phantom was positioned under the waist during DECT procedure to realize the quantization of bone mineral density (BMD). The intraclass correlation coefficient (ICC) and Bland–Altman method was used to evaluate the agreement between DECT-FF and MRI-FF. The Pearson test was used to study the correlation between DECT-FF, MRI-FF, and BMD. With BMD as a gold standard, the diagnostic efficacy of DECT-FF and MRI-FF in different OP degrees was compared by receiver operating characteristic (ROC) curve and DeLong test.

Results

The values of DECT-FF and MRI-FF agreed well (ICC = 0.918). DECT-FF and MRI-FF correlated with BMD, with r values of −0.660 and −0.669, respectively (p < 0.05). In the diagnosis of OP and osteopenia, the areas under curve (AUC) of DECT-FF was, respectively, 0.791 and 0.710, and that of MRI-FF was 0.807 and 0.708, and there was no significant difference between AUCs of two FF values (with Z values of 0.503 and 0.066, all p > 0.05).

Conclusion

DECT can accurately quantify the BMAT of vertebrae and has the same applicability as MRI in the study of OP.

miR-215-5p regulates osteoporosis development and osteogenic differentiation by targeting XIAP

Background

Osteoporosis (OP) is a metabolic disease that involves microstructure destruction and fracture damage. The present study probed into the significance of miR-215-5p in OP progression.

Methods

Serum samples were collected from surgical patients and healthy controls. qRT-PCR analysis was utilized to determine the miR-215-5p level in clinical samples and human bone mesenchymal stem cells (hBMSCs) induced by β-glycerol phosphate. A dual luciferase reporter assay was exploited to examine the targeted relationship between miR-215-5p and XIAP. The mineralization and calcium deposition of hBMSCs were assessed by detection of ALP activity, Alizarin red staining, and osteoblast marker expression. Protein expression was determined by western blot analysis.

Results

MiR-215-5p was significantly reduced in patients with OP and increased in hBMSCs treated with β-glycerophosphate. Enhanced miR-215-5p level triggered augment in osteoblast markers (Alkaline phosphatase/ ALP, Osteocalcin/ OCN, and Runt-Related Transcription Factor 2/ Runx2), which was accompanied by the increase of ALP activity in hBMSCs and accumulation of Calcium. Functional experiments show that XIAP was a target of miR-215-5p and negatively modulated by miR-215-5p. XIAP expression levels were increased in OP samples, and decreased XIAP in β-glycerophosphate-treated hBMSCs inhibited its’ osteogenic differentiation. Functional loss and acquisition experiments depicted that miR-215-5p promoted the differentiation of hBMSCs by inhibiting the XIAP level, playing a protective role in the pathogenesis of OP.

Conclusions

β-glycerophosphate promoted the osteogenic differentiation of hBMSCs, increased miR-215-5p level, and decreased XIAP. miR-215-5p stimulated osteogenic differentiation of hBMSCs by targeting XIAP, shedding new insights for the detection and therapy of OP.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12891-022-05731-w.