Reduction of Interpatient Variability of Arterial Enhancement Using a New Bolus Tracking System in 320-Detector Computed Tomographic Coronary Angiography:

New protocol for contrast media reduction in atrial fibrillation ablation-planning CT with dual region of interest

INTRODUCTION

Many patients with atrial fibrillation have impaired renal function, and therefore pre-operative CT for radiofrequency catheter ablation should minimize the use of contrast media. This study describes a dual-region-of-interest (D-ROI) protocol for the scanning of pulmonary veins and left atrium (PVs-LA) with less contrast media and optimized scan timing compared to the single-region-of-interest (S-ROI) protocol, without compromising image quality.

METHODS

This study retrospectively included 100 patients who underwent PVs-LA CT between July 2019 and February 2022. The participants were divided into two groups: Those scanned using the S-ROI method (Group A, n = 50), and those scanned using the D-ROI method (Group B, n = 50). Descriptive statistical analysis of the contrast effect and scan timing was performed using quantitative and qualitative data collected from both groups of images.

RESULTS

The contrast media dose was larger in group A than in group B (63.6 ± 10.1 mL vs. 45.6 ± 6.9 mL; p < 0.001). The CT values of the PVs-LA did not differ significantly between groups A and B [434.2 ± 77.0 Hounsfield units (HU) and 428.8 ± 77.2 HU, respectively; p = 0.73]. Two evaluators determined appropriate scan timing (when PVs-LA reached a relatively sufficient contrast effect for diagnosis) in 23 (46%) and 45 (90%) patients from groups A and B, respectively (p < 0.001).

CONCLUSIONS

Although the radiation dose is slightly increased compared with the S-ROI method, the D-ROI method provides improved scan timing and images with similar contrast enhancement while reducing the amount of contrast medium administered.

IMPLICATIONS FOR PRACTICE

The novel D-ROI bolus tracking technique can reduce the contrast medium dose while optimizing scan timing.

Optimization of uniformity in coronary artery enhancement using a bolus tracking technique with a dual region of interest in coronary computed tomographic angiography

BACKGROUND

Consistent coronary artery enhancement is essential to achieve accurate and reproducible quantification of coronary plaque composition.

PURPOSE

To optimize coronary artery uniformity of enhancement using a bolus tracking technique with a dual region of interest (ROI) in coronary computed tomography angiography (CCTA) on a 320-detector CT scanner.

MATERIAL AND METHODS

This prospective study recruited 100 consecutive patients who underwent CCTA and were randomly divided into two groups, namely, a manual trigger group (n = 50), in which a manual fast start technique was used to start the diagnostic scan with the visual evaluation of attenuation in the left atrium and left ventricle, and an automatic trigger group (n = 50), in which a bolus tracking technique was used to automatically start the breath-holding command and diagnostic scan with two ROIs placed in the right and left ventricles. Coronary artery image quality was assessed using quantitative and qualitative scores. The enhancement uniformity was characterized by attenuation variability of the ascending aorta (AAO) and coronary arteries.

RESULTS

No statistically significant differences in the image quality of the coronary arteries were observed between the two groups (all P > 0.05). The coefficients of variation (COVs) of arterial attenuation in the automatic trigger group were significantly smaller than in the manual trigger group (AAO: 9.89% vs. 17.93%; LMA: 10.35% vs. 18.98%; LAD proximal: 12.09% vs. 20.84%; LCX proximal: 11.85% vs. 20.95%; RCA proximal: 12.13% vs. 20.84%; all P < 0.05).

CONCLUSION

The automatic trigger technique accompanied with dual ROI provides consistent coronary artery enhancement and optimizes coronary artery enhancement uniformity in CCTA on a 320-detector CT scanner.

Contrast media timing optimization for coronary CT angiography: a retrospective validation study in swine

OBJECTIVES

The objective was to retrospectively develop a protocol in swine for optimal contrast media timing in coronary CT angiography (CCTA).

METHODS

Several dynamic acquisitions were performed in 28 swine (55 ± 24 kg) with cardiac outputs between 1.5 and 5.5 L/min, for 80 total acquisitions. The contrast was injected (1mL/kg, 5mL/s, Isovue 370), followed by dynamic scanning of the entire aortic enhancement curve, from which the true peak time and aortic and coronary enhancements were recorded as the reference standard. Each dataset was then used to simulate two different CCTA protocols-a new optimal protocol and a standard clinical protocol. For the optimal protocol, the CCTA was acquired after bolus tracking-based trigging using a variable time delay of one-half the contrast injection time interval plus 1.5 s. For the standard protocol, the CCTA was acquired after bolus tracking-based triggering using a fixed time delay of 5 s. For both protocols, the CCTA time, aortic enhancement, coronary enhancement, and coronary contrast-to-noise ratio (CNR) were quantitatively compared to the reference standard measurements.

RESULTS

For the optimal protocol, the angiogram was acquired within -0.15 ± 0.75 s of the true peak time, for a mean coronary CNR within 7% of the peak coronary CNR. Conversely, for the standard CCTA protocol, the angiogram was acquired within -1.82 ± 1.71 s of the true peak time, for a mean coronary CNR that was 23% lower than the peak coronary CNR.

CONCLUSIONS

The optimal CCTA protocol improves contrast media timing and coronary CNR by acquiring the angiogram at the true aortic root peak time.

KEY POINTS

• This study in swine retrospectively developed the mathematical basis of an improved approach for optimal contrast media timing in CCTA. • By combining dynamic bolus tracking with a simple contrast injection timing relation, CCTA can be acquired at the peak of the aortic root enhancement. • CCTA acquisition at the peak of the aortic root enhancement should maximize the coronary enhancement and CNR, potentially improving the accuracy of CT-based assessment of coronary artery disease.

Feasible scan timing for 320-row coronary CT angiography generated by the time to peak in the ascending aorta

PURPOSE

A 320-row CT scanner can briefly scan the entire heart. Therefore, the feasible scan timing is required. The aim of this study was to propose a refined method for feasible scan timing for coronary CT angiography (CCTA) using a time-density curve of the ascending aorta (AAo).

METHODS

One-hundred and twenty-nine patients were prospectively enrolled. All patients were performed test-bolus method. For the initial 65 patients, the scan timing was determined as a 3.0 s delay at the peak time in the AAo, which was defined as the conventional protocol (COV-P). For the next 64 patients, a scan timing of 1.0, 3.0, or 5.0 s delay was determined according to the interval from the contrast media arrival to peak time in the AAo, which was defined as the arrival to peak protocol (AP-P). The optimal scan timing was identified by the measurement of CT number in the left atrium, left ventricle, AAo, and descending aorta. The coronary enhancement and heterogeneity were compared between the two protocols.

RESULTS

The optimal scan timing was significantly higher in the AP-P than in the COV-P (85.9% vs. 61.5%, p = 0.0017). The CT number in the left circumflex artery (LCX) was significantly higher in the AP-P than the COV-P (344.5 Hounsfield units vs. 316.3 Hounsfield units, p = 0.0484). The heterogeneous index of the LCX was significantly greater for the COV-P than the AP-P (-36.8 vs. -25.8, p = 0.0028).

CONCLUSIONS

The AP-P can be used to determine the optimal scan timing for CCTA and contributes to stable coronary enhancement.

Dual-region-of-interest bolus-tracking technique for coronary computed tomographic angiography on a 320-row scanner: reduction in the interpatient variability of arterial contrast enhancement

OBJECTIVE

We compared the effect of a dual-region-of-interest (ROI) bolus-tracking technique on interpatient variability of arterial contrast enhancement with that of the conventional bolus-tracking technique in coronary computed tomographic angiography (CTA) on a 320-row scanner.

METHODS

This study included 100 patients who underwent coronary CTA using one of two protocols: (1) 50 patients underwent scanning using a conventional single-ROI bolus-tracking technique (P-single) with an ROI placed in the ascending aorta, and (2) 50 patients underwent scanning using a dual-ROI technique (P-dual) with two ROIs placed in the pulmonary trunk and the ascending aorta. CT attenuation in the ascending aorta and coronary arteries, and the interpatient variability were compared between the two scanning protocols.

RESULTS

The mean CT attenuation of the ascending aorta and coronary arteries tended to be higher for P-dual than for P-single, but the difference was not significant (p = 0.08-0.30). The interpatient variability of contrast enhancement (SD of the CT attenuation) was significantly smaller for P-dual than for P-single (p < 0.01).

CONCLUSION

The dual-ROI bolus-tracking technique can reduce interpatient variability of arterial contrast enhancement in coronary CTA on a 320-row scanner. Advances in knowledge: The use of a dual-ROI bolus-tracking technique can provide sufficient and consistent arterial enhancement of coronary CTA.

Advances in cardiac CT contrast injection and acquisition protocols

Cardiac computed tomography (CT) imaging has become an important part of modern cardiovascular care. Coronary CT angiography (CTA) is the first choice imaging modality for non-invasive visualization of coronary artery stenosis. In addition, cardiac CT does not only provide anatomical evaluation, but also functional and valvular assessment, and myocardial perfusion evaluation. In this article we outline the factors which influence contrast enhancement, give an overview of current contrast injection and acquisition protocols, with focus on current emerging topics such as pre-transcatheter aortic valve replacement (TAVR) planning, cardiac CT for congenital heart disease (CHD) patients, and myocardial CT perfusion (CTP). Further, we point out areas where we see potential for future improvements in cardiac CT imaging based on a closer interaction between CT scanner settings and contrast injection protocols to tailor injections to patient- and exam-specific factors.

Optimal scan timing for artery-vein separation at whole-brain CT angiography using a 320-row MDCT volume scanner

OBJECTIVE

A 320-row multidetector CT (MDCT) is expected for a good artery-vein separation in terms of temporal resolution. However, a shortened scan duration may lead to insufficient vascular enhancement. We assessed the optimal scan timing for the artery-vein separation at whole-brain CT angiography (CTA) when bolus tracking was used at 320-row MDCT.

METHODS

We analyzed 60 patients, who underwent whole-brain four-dimensional CTA. Difference in CT attenuation between the internal carotid artery (ICA) and the superior sagittal sinus (D_att) was calculated in each phase. Using a visual evaluation score for the depiction of arteries and veins, we calculated the difference between the mean score for the intracranial arteries and the mean score for the veins (D_score). We assessed the time at which the maximum D_att and D_score were simultaneously observed.

RESULTS

The maximum D_att was observed at 6.0 s and 8.0 s in the arterial-dominant phase and at 16.0 s and 18.0 s in the venous-dominant phase after the contrast media arrival time at the ICA (T_aa). The maximum D_score was observed at 6.0 s and 8.0 s in the arterial-dominant phase and at 16.0 s in the venous-dominant phase after the T_aa. There were no statistically significant differences in D_att (p = 0.375) or D_score (p = 0.139) between these scan timings.

CONCLUSION

The optimal scan timing for artery-vein separation at whole-brain CTA was 6.0 s or 8.0 s for the arteries and 16.0 s for the veins after the T_aa. Advances in knowledge: Optimal scan timing allowed us to visualize intracranial arteries or veins with minimal superimposition.

Low contrast and radiation dose coronary CT angiography using a 320-row system and a refined contrast injection and timing method

BACKGROUND

Among CT scanners, 320-row instruments feature decreased photon energy and yield strong contrast enhancement. Consequently, the contrast medium (CM) dose can be reduced. The results of low-tube-voltage coronary CT angiography (CCTA) performed on 320-row scanners have not been adequately assessed.

OBJECTIVE

We evaluated the effects of a low-contrast-dose protocol on the image quality of CCTA using 80 kVp tube voltage, iterative reconstruction (IR), and a 320-row scanner.

METHODS

We randomly assigned 90 patients (mean body weight, 56.5 ± 11.0 kg) to 1 of 3 CCTA protocols. Under protocol A, 30 were scanned using a conventional 120-kVp protocol and a standard CM dose (280 mg iodine/kg body weight [mgI/kg]). Another 30 underwent scanning at 80 kVp with a 25% CM dose reduction (210 mgI/kg; protocol B). Under protocol C, the remaining 30 patients were scanned at 80 kVp with a 50% CM dose reduction (140 mgI/kg). The 120 and 80 kVp images were processed with IR. Images obtained under the 3 protocols were subjected to quantitative and qualitative analysis.

RESULTS

The amount of CM used in protocol A, B, and C was 43.6 ± 10.1, 30.3 ± 4.4, and 21.0 ± 4.0 mL, respectively. Mean CT attenuation of the coronary arteries tended to be higher under protocol B than the other 2 protocols. The contrast-to-noise ratio was significantly higher under protocol B. The mean visual scores were significantly higher for protocols A and B than protocol C. The mean effective radiation dose was significantly lower under the 80-kVp protocol.

CONCLUSION

With a 320-row scanner and our refined CM injection and timing protocol, it is technically feasible to obtain sufficient vascular enhancement with a reduction in the CM and/or radiation dose at 80-kVp CCTA with IR.