Correlation Analysis of Three-Dimensional Changes of Hard and Soft Tissues in Class III Orthognathic Surgery Patients Using Cone-Beam Computed Tomography:

Analyzing Discrepancies and Correlations in Soft and Hard Tissue Asymmetry: A Focused Study on Hemifacial Microsomia and Isolated Microtia

BACKGROUND

This study aims to thoroughly investigate the distinctions and relationships between facial hard and soft tissue asymmetry, as well as their variations within different conditions and age groups.

METHODS

This cross-sectional study analyzed pre-treatment computed tomography (CT) images from 120 male patients aged 5 to 12 years with unilateral HFM (Pruzansky-Kaban types I and IIA) or isolated microtia. The 120 patients were categorized into four groups by condition (HFM or isolated microtia) and age (5-7, 8-12 years). Segmentation and extraction of anatomical landmarks were performed using Mimics software, followed by generating root-mean-square (RMS) values for facial asymmetry. Statistical analysis, including the Wilcoxon signed-rank test and Spearman correlation coefficient, was conducted to assess differences and correlations in asymmetry.

RESULTS

The study found that soft tissue asymmetry was generally greater than hard tissue asymmetry across all facial regions. The complexity of regional asymmetry correlations increased with age in HFM patients but decreased in isolated microtia patients. Significant correlations between hard and soft tissues were observed within the same anatomical regions, particularly in HFM patients aged 8-12 years.

CONCLUSION

The intricate interplay between hard and soft tissues was observed in HFM and isolated microtia patients. Personalized analysis of the causes of asymmetry in different regions is crucial for the formulation of effective treatment plans.

LEVEL OF EVIDENCE IV

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Comparison of regional soft tissue changes after bimaxillary rotational surgery between class III deformity with overbite and open bite: A 3D imaging analysis

BACKGROUND

This prospective study aimed to compare regional soft tissue changes between patients with class III overbite and open bite deformities treated with bimaxillary surgery involving clockwise and counter-clockwise mandibular setback, respectively.

MATERIAL AND METHODS

Class III deformity adults receiving Le Fort I and bilateral sagittal split osteotomies were grouped according to the incisal occlusion: overbite (n = 30) and open bite (n = 30). Combined cone-beam CT scans and 3D facial photographs preoperative and at least 1-year postoperative were taken to assess the soft tissue changes.

RESULTS

Postoperative changes for the overbite and open bite groups included anterior repositioning of nose (-0.8 ± 1.2 mm and -1.1 ± 1.1 mm, respectively) and cheek (-1.9 ± 1.3 mm and -1.7 ± 2.6 mm, respectively), posterior repositioning of chin (5.2 ± 4.0 mm and 4.9 ± 3.2 mm, respectively), and medial (-1.7 ± 2.0 mm and -1.9 ± 2.1 mm, respectively) and posterior (2.7 ± 1.4 mm and 2.8 ± 2.3 mm, respectively) repositioning of bilateral angles. Posterior (1.2 ± 2.0 mm and 5.1 ± 3.3 mm) and inferior (-1.4 ± 2.2 mm and -2.4 ± 2.7 mm) repositioning of upper lip and lower lip occurred in overbite group. Inferior (-2.3 ± 2.4 mm) and superior (3.7 ± 3.4 mm) repositioning of chin occurred in the overbite and open bite groups, respectively.

CONCLUSIONS

Treatment of class III overbite and open bite deformities with bimaxillary rotational surgery resulted in comparable regional soft tissue changes, except for upper lip, lower lip and chin.

One-splint versus two-splint technique in orthognathic surgery for class III asymmetry: comparison of patient-centred outcomes

OBJECTIVES

Two-jaw orthognathic surgery (OGS) is done using either the one-splint technique with free-hand positioning of the maxillomandibular complex or the two-splint technique with intermediate splints to position the maxilla. It is uncertain which technique achieves better outcomes. This study compares frontal soft tissue symmetry and subjective patient QoL between one-splint and two-splint techniques in skeletal Class III asymmetry patients undergoing OGS with three-dimensional surgical planning.

MATERIALS AND METHODS

This retrospective case-control study comprised 34 one-splint and 46 two-splint OGS patients. Frontal photographs and Orthognathic Quality of Life Questionnaire (OQLQ) were done pre- and post-treatment. Frontal soft tissue symmetry was analysed with the anthropometric Facial Symmetry Index. Measurements were compared with t-tests and chi-squared tests with p-value set at 0.05.

RESULTS

The groups differed in pre-treatment ANB and OQLQ scores. The two-splint group showed significant improvement in all symmetry measures. The one-splint group showed significant improvement in all symmetry measures except midface deviation, upper contour deviation and the Facial Contour Symmetry Index. Both groups showed significant improvement in OQLQ scores. There were no significant differences in post-treatment symmetry measurements and OQLQ scores between groups.

CONCLUSIONS

Although two-splint technique may better improve contour symmetry, there were no significant differences in frontal soft tissue symmetry and QoL after OGS in skeletal Class III asymmetry with either one-splint or two-splint technique, with both techniques resulting in significant improvement.

CLINICAL RELEVANCE

One-splint and two-splint surgical techniques produce similar patient-centred outcomes in Class III asymmetry patients.

Midfacial soft tissue changes after maxillary expansion using micro-implant-supported maxillary skeletal expanders in young adults: A retrospective study

Objective

The aim of this retrospective study was to assess the midfacial soft tissue changes following maxillary expansion using micro-implant-supported maxillary skeletal expanders (MSEs) in young adults by cone-beam computerized tomography (CBCT) and to evaluate the correlations between hard and soft tissue changes after MSE usage.

Methods

Twenty patients (mean age, 22.4 years; range, 17.6–27.1) with maxillary transverse deficiency treated with MSEs were selected. Mean expansion amount was 6.5 mm. CBCT images taken before and after expansion were superimposed to measure the changes in soft and hard tissue landmarks. Statistical analyses were performed using paired t-test and Pearson’s correlation analysis on the basis of the normality of data.

Results

Average lateral movement of the cheek points was 1.35 mm (right) and 1.08 mm (left), and that of the alar curvature points was 1.03 mm (right) and 1.02 mm (left). Average forward displacement of the cheek points was 0.59 mm (right) and 0.44 mm (left), and that of the alar curvature points was 0.61 mm (right) and 0.77 mm (left) (p < 0.05). Anterior nasal spine (ANS), posterior nasal spine (PNS), and alveolar bone width showed significant increments (p < 0.05). Changes in the cheek and alar curvature points on both sides significantly correlated with hard tissue changes (p < 0.05).

Conclusions

Maxillary expansion using MSEs resulted in significant lateral and forward movements of the soft tissues of cheek and alar curvature points on both sides in young adults and correlated with the maxillary suture opening at the ANS and PNS.

Effect of Le Fort I Maxillary Repositioning on Three-Dimensional Nasal Tip Rotation: A Comparative Study with Implication for the Asian Nose

BACKGROUND

Le Fort I maxillary repositioning influences nasal morphology. In Asian cultures, upward nasal tip rotation with increased nostril exposure is considered aesthetically unpleasant and can have psychosocial consequences. This three-dimensional imaging-based study evaluated the effect of different Le Fort I maxillary movements on nasal tip rotation.

METHODS

Consecutive patients who underwent two-jaw orthognathic surgery (n = 107) were enrolled. To achieve a standard head orientation, preoperative and 1-week and 12-month postoperative cone-beam computed tomography-derived three-dimensional craniofacial models were superimposed. Tip rotation angle was calculated according to the Frankfort horizontal plane for all three-dimensional digital models. The final tip rotation angle change was defined as 12-month postoperative value minus preoperative value. Translational maxillary movement types (advancement versus setback and intrusion versus extrusion), postoperative maxillary segment locations (anterosuperior, anteroinferior, posterosuperior, or posteroinferior), and actual linear maxillary changes were noted.

RESULTS

Advancement (1.79 ± 5.20 degrees) and intrusion (2.23 ± 4.96 degrees) movements demonstrated significantly larger final tip rotation angle changes than setback (-0.88 ± 5.15 degrees) and extrusion (0.09 ± 5.44 degrees) movements (all p < 0.05). Postoperative anterosuperior location (2.95 ± 4.52 degrees) of the maxillary segment demonstrated a significantly larger final tip rotation angle change than anteroinferior (0.48 ± 5.65 degrees), posterosuperior (-1.08 ± 4.77 degrees), and posteroinferior (-0.64 ± 5.80 degrees) locations (all p < 0.05). Translational maxillary movement and actual linear maxillary change were not correlated with final tip rotation angle change.

CONCLUSION

Effects of Le Fort I maxillary repositioning on nasal tip rotation depend on movement types and maxillary segment location.

CLINICAL QUESTION/LEVEL OF EVIDENCE

Therapeutic, III.

Effect of Le Fort I Maxillary Advancement and Clockwise Rotation on the Anteromedial Cheek Soft Tissue Change in Patients with Skeletal Class III Pattern and Midface Deficiency: A 3D Imaging-Based Prediction Study

Patients with a skeletal Class III deformity may present with a concave contour of the anteromedial cheek region. Le Fort I maxillary advancement and rotational movements correct the problem but information on the impact on the anteromedial cheek soft tissue change has been insufficient to date. This three-dimensional (3D) imaging-assisted study assessed the effect of surgical maxillary advancement and clockwise rotational movements on the anteromedial cheek soft tissue change. Two-week preoperative and 6-month postoperative cone-beam computed tomography scans were obtained from 48 consecutive patients who received 3D-guided two-jaw orthognathic surgery for the correction of Class III malocclusion associated with a midface deficiency and concave facial profile. Postoperative 3D facial bone and soft tissue models were superimposed on the corresponding preoperative models. The region of interest at the anteromedial cheek area was defined. The 3D cheek volumetric change (mm3; postoperative minus preoperative models) and the preoperative surface area (mm2) were computed to estimate the average sagittal movement (mm). The 3D cheek mass position from orthognathic surgery-treated patients was compared with published 3D normative data. Surgical maxillary advancement (all p < 0.001) and maxillary rotation (all p < 0.006) had a significant effect on the 3D anteromedial cheek soft tissue change. In total, 78.9%, 78.8%, and 78.8% of the variation in the cheek soft tissue sagittal movement was explained by the variation in the maxillary advancement and rotation movements for the right, left, and total cheek regions, respectively. The multiple linear regression models defined ratio values (relationship) between the 3D cheek soft tissue sagittal movement and maxillary bone advancement and rotational movements of 0.627 and 0.070, respectively. Maxillary advancements of 3-4 mm and >4 mm resulted in a 3D cheek mass position (1.91 ± 0.53 mm and 2.36 ± 0.72 mm, respectively) similar (all p > 0.05) to the 3D norm value (2.15 ± 1.2 mm). This study showed that both Le Fort I maxillary advancement and rotational movements affect the anteromedial cheek soft tissue change, with the maxillary advancement movement presenting a larger effect on the cheek soft tissue movement than the maxillary rotational movement. These findings can be applied in future multidisciplinary-based decision-making processes for planning and executing orthognathic surgery.

Cone Beam Computed Tomography in Oral and Maxillofacial Surgery: An Evidence-Based Review

Cone Beam Computed Tomography (CBCT) is a valuable imaging technique in oral and maxillofacial surgery (OMS) that can help direct a surgeon’s approach to a variety of conditions. A 3-dimensional analysis of head and neck anatomy allows practitioners to plan appropriately, operate with confidence, and assess results post-operatively. CBCT imaging has clear indications and limitations. CBCT offers the clinician 3-dimensional and multi-planar views for a more accurate diagnosis and treatment without the financial burden and radiation exposure of conventional computed tomography (CT) scans. Furthermore, CBCT overcomes certain limitations of 2-dimensional imaging, such as distortion, magnification, and superimposition. However, CBCT lacks the detailed depiction of soft tissue conditions for evaluation of pathologic conditions, head and neck infections, and temporomandibular joint (TMJ) disc evaluation. This review evaluates the evidence-based research supporting the application of CBCT in the various fields of oral and maxillofacial surgery, including dentoalveolar surgery, dental implants, TMJ, orthognathic surgery, trauma, and pathology, and will assess the value of CBCT in pre-operative assessment, surgical planning, and post-operative analysis when applicable. Additionally, the significant limitations of CBCT and potential areas for future research will be discussed.

Three-dimensional region-based study on the relationship between soft and hard tissue changes after orthognathic surgery in patients with prognathism

Both deep understanding and reliable prediction of postoperative soft tissue changes are crucial for planning orthognathic surgery. Instead of estimating soft tissue responses by measuring individual landmark changes, this study aimed to investigate the relationship (ratio) between soft and hard tissue movements in different facial regions through three-dimensional cone-beam computed tomography (CBCT). Preoperative and postoperative CBCT images were superimposed using the surface registration method on the basis of the cranial base, and 10 facial regions of interest were defined. Region-based volumetric subtractions between the preoperative and postoperative segments were performed. The volumetric differences and surface of each region were used to estimate the average movement. Correlation and regression analyses were performed to examine the relationships between the corresponding soft and hard tissue movements. An overall pattern of facial soft tissue movement was observed in patients with prognathism who underwent orthognathic surgery. The experiment results have shown that mean ratios for the average soft-to-hard tissue movements in the facial regions varied, which may not exactly be similar to the published reports because of the population biocharacteristics and study methods, but the trend is in agreement with the previous studies. Additionally, the prediction capability of the regression model was significantly high, ranging from 0.786 to 0.857, in upper lip, upper vermilion, and chin regions, thus demonstrating that the skin outline changes in these critical regions could be reliably predicted from the underlying bone movements. These results could likely be applied in future soft tissue simulation in orthognathic surgery.