An Accurate Volumetric Analysis Method for Evaluating Outcomes of Alveolar Cleft Reconstruction

Accurately Computing the Interacted Volume of Molecules over Their 3D Mesh Models

For quickly predicting the rational arrangement of catalysts and substrates, we previously proposed a method to calculate the interacted volumes of molecules over their 3D point cloud models. However, the nonuniform density in molecular point clouds may lead to incomplete contours in some slices, reducing the accuracy of the previous method. In this paper, we propose a two-step method for more accurately computing molecular interacted volumes. First, by employing a prematched mesh slicing method, we layer the 3D triangular mesh models of the electrostatic potential isosurfaces of two molecules globally, transforming the volume calculation into finding the intersecting areas in each layer. Next, by subdividing polygonal edges, we accurately identify intersecting parts within each layer, ensuring precise calculation of interacted volumes. In addition, we present a concise overview for computing intersecting areas in cases of multiple contour intersections and for improving computational efficiency by incorporating bounding boxes at three stages. Experimental results demonstrate that our method maintains high accuracy in different experimental data sets, with an average relative error of 0.16%. On the same experimental setup, our average relative error is 0.07%, which is lower than the previous algorithm's 1.73%, improving the accuracy and stability in calculating interacted volumes.

Bioglass 45S5, a relevant alternative to autogenous harvesting for secondary alveolar bone grafts in clefts? Retrospective study of one hundred surgeries

The secondary alveolar bone grafting (SABG) step restores the continuity of the alveolar bone necessary for dentition. Faced with the complications of autografts, synthetic biomaterials such as Bioglass (BG) 45S5 have been proposed. The objective was to evaluate the success rate of SABG with the addition of BG 45S5 and to highlight the prognostic factors. Patients who underwent operation between 2015 and 2021 and had follow-up cone-beam computed tomography (CBCT) were analyzed. Multivariate analysis was performed to determine factors influencing radiographic success. A total of 102 SABG were analyzed. They were unilateral total cleft lip and palate (49, 48.0%). The mean age at surgery was 9.32 ± 3.09 years. Surgeries were performed mainly outside a syndromic context and without a family history after orthodontic preparation. The radiographic success rate at 1 year was 80.4%. Mixed dentition stage (odds ratio [OR] = 7.3, p = 0.024), absence of syndromic context (OR = 20.7, p = 0.024) and female sex (OR = 4.88, p = 0.021) were factors predictive of surgical success. The use of BG 45S5 instead of autograft is relevant for SABG, with a 1-year success rate of over 80%. The stage of mixed dentition, the absence of syndromic context, and female sex were factors for good prognosis.

Influence of osseous structure characteristics of unilateral alveolar cleft on outcomes of alveolar bone grafting: a retrospective study

BACKGROUND

To enhance the success rate of alveolar bone grafting, it is crucial to identify the factors that may influence the postoperative bone formation. This study aimed to investigate the impact of various osseous structure characteristics of alveolar clefts on the survival ratio of autogenous cancellous bone particle grafts.

METHODS

A retrospective study was conducted on 60 patients who underwent surgery performed by the same surgeon between 2016 and 2022. Two researchers measured and recorded the bone defect volume (DV), postoperative bone formation volume at 1 year, contact area between the graft and the bone surface within the cleft (S), cleft width (CW), osseous occlusion relationships, and presence of a cleft palate and initial bone bridge within the cleft for each patient. Pearson correlation analysis, Spearman's correlation analysis, and multiple linear regression analysis were performed.

RESULTS

The analysis results revealed statistical correlations between DV, CW, ratio of S to DV, cleft palate, initial bone bridge presence, and occlusion relationships with the survival rate. Multiple linear regression analysis showed that initial bone bridge and occlusion relationships affected the graft survival rate.

CONCLUSIONS

Based on the presence of initial bone bridges and occlusions, we can make a rough estimate of the postoperative bone formation outcome in patients. However, the underlying mechanisms by which these two factors influence the bone formation require further investigation. In addition, preoperative orthodontic treatment to improve occlusal relationships may improve the postoperative bone formation outcomes in alveolar bone grafting.

Cone Beam Computed Tomographic Analysis Demonstrates a 94% Radiographic Success Rate in 783 Alveolar Bone Grafts

PURPOSE

Success of alveolar bone grafting has been estimated using 2-dimensional periapical radiographs that are associated with image distortion. Cone beam computed tomography (CBCT) accurately displays 3-dimensional anatomy. This study sought to develop and apply a radiographic measure of alveolar bone grafting success using CBCT.

METHODS

This was a retrospective case series composed of patients with cleft lip/palate who had iliac crest bone grafting by 1 surgeon from 2005 to 2020. CBCT scans were obtained ≥4 months after graft. The outcome variables included vertical bone height on cleft adjacent teeth, labiopalatal thickness, and nasal floor symmetry and were scored using a 1 to 4 ordinal scale. Vertical height was determined by the distance from the cementoenamel junction to the marginal bone level of cleft adjacent teeth (1: ≥75% root length, 2: ≥50 to <75%, 3: ≥25 to <50%, 4: <25%), labiopalatal thickness was scored by comparing graft thickness with root width of cleft adjacent teeth (1: <50%, 2: ≥50, 3: ≥75%, 4: ≥100%), and piriform symmetry was established by comparing the nasal floor height between sides (1: ≥6 mm, 2: ≥3 and < 6 mm, 3: ≥1 and < 3 mm, 4: a score of ≥3 < 1 mm). To be considered a successful graft, each dimension scored ≥3. Grafts were also successful if piriform symmetry scored 2, when all other measures indicated success.

RESULTS

The sample was composed of 618 patients with 783 alveolar cleft sites. Subjects' median age was 10.0 (interquartile range 1.6 years), and 59% were male. CBCT scans were obtained a median of 9.7 months (interquartile range 68.8 months) after grafting. There was good-to-excellent intrarater and inter-rater agreement for measurements. Alveolar bone grafting was radiographically successful in 94% of patients.

CONCLUSIONS

This is a valid and reliable assessment tool, and when applied to a large cohort, it demonstrated a 94% graft success rate. Future studies will identify predictor variables associated with bone graft outcomes.

Evaluation of the CBCT imaging accuracy in the volumetric assessment of unilateral alveolar cleft

INTRODUCTION

Appropriate radiographic evaluation is a fundamental step for determining the topography of the defect before the surgical intervention for alveolar bone grafting. Evaluation of cleft volume by CBCT has been done in dry skull samples in previous studies and it was recommended as an effective tool in the volumetric evaluation of the bone defect prior to the surgery. The purpose of this study was to evaluate the accuracy of preoperative clinical use of CBCT¹ imaging in determining the alveolar cleft volume.

MATERIAL AND METHODS

We performed a clinical study. 20 patients with unilateral alveolar cleft underwent preoperative radiographic evaluation using CBCT scan. Volumetric measurement was performed by an oral and maxillofacial radiologist using 0.5, 1, and 2 mm slices and an oral and maxillofacial surgeon using 2 mm slices. After the closure of the nasal floor and palatal mucosa, the alveolar defect was clinically measured with putty impression material. Descriptive and bivariate statistics were computed and the p-value was set at 0.05.

RESULTS

This study showed that there is a statistically significant difference between CBCT-estimated and clinical volumes of the alveolar cleft (paired T-test, p-value < 0.05).

CONCLUSION

Considering the significant difference between clinical and CBCT-estimated volumes of the alveolar cleft, CBCT imaging is not considered an accurate tool for pre-operative volumetric assessment of the alveolar cleft.

Comparative study of three composite materials in bonding attachments for clear aligners

OBJECTIVE

The aim of this study was to assess the operation time, shear bond strength, placement accuracy and wear resistance of 3 composite materials (Filtek Z350XT, Filtek Z350XT Flowable and SonicFill) that were used to make attachments for clear aligners.

SETTINGS AND SAMPLE POPULATION

Laboratory of Stomatology of Shanghai Ninth People's Hospital affiliated to Shanghai Jiao Tong University School of Medicine. A total of 129 human mandibular premolars were collected, 69 of which were assigned to 3 groups (A1, B1 and C1). The remaining 60 teeth were divided into 3 groups (A2, B2 and C2).

METHODS

Z350XT composite resin was used in groups A1 and A2 to bond the attachments. Z350XT Flowable composite resin was used in groups B1 and B2. SonicFill composite resin was used in groups C1 and C2. The operation time, shear bond strength, the placement accuracy and wear volume loss of 3 composite materials were evaluated.

RESULTS

The operation time of Z350XT Flowable and SonicFill was shorter than Z350XT (P < .05). The shear bond strength of SonicFill was higher than Z350XT and Z350XT Flowable (P < .05). The SEM showed that the bonding interface of Z350XT and SonicFill was compact. The 3D deviation and volumetric change in the 3D designed attachments and the attachments after actual bonding of Z350XT Flowable were greater than that of Z350XT and SonicFill (P < .05). The wear volume loss of SonicFill and Z350XT was less than that of Z350XT Flowable (P < .05).

CONCLUSION

SonicFill seems to represent a suitable material for producing attachments, which optimized the property combination.

Evaluating the efficacy of recombinant human bone morphogenic protein-2 in the treatment of alveolar clefts with autologous bone grafting using computer-aided engineering techniques

Recent studies have indicated the use of recombinant human bone morphogenetic protein-2 (rhBMP-2) to be a viable adjunctive to alveolar cleft reconstruction owing to its osteoinductive capacity. This study aimed to evaluate the efficacy of rhBMP-2 in the treatment of alveolar cleft with autologous bone grafts by precise volumetric analysis. Twenty-six patients (aged 8-14) with unilateral alveolar clefts were enrolled in this comparative study. Patients were divided into two groups: the iliac crest bone graft (ICBG) was placed at the side of the cleft in the control group (ICBG group), and rhBMP-2 was mixed with the ICBG in the rhBMP-2 group (BMP group). Helical computed tomographic images were obtained preoperatively and 12 months postoperatively. The datasets were reconstructed as three-dimensional (3D) images using Mimics software and processed using Geomagic Wrap. The newly formed bone of the alveolar cleft was segmented by identifying the differences between preoperative and postoperative 3D images. In the ICBG group, the volume of newly formed bone ranged from 0.25 to 0.88 cm³, and the mean (SD) bone formation percentage was 42.01% (15.57%). In the BMP group, the volume of newly formed bone ranged from 0.34 to 1.09 cm³, and the bone formation mean (SD) percentage was 55.79% (11.84%). There was a statistically significant difference between the two groups in terms of the postoperative percentage of bone formation (p = 0.022). Thus, rhBMP-2 combined with an autologous bone graft is a promising technique to improve the results of secondary alveolar bone grafting.