Safety and efficacy of recombinant human bone morphogenetic protein 2 on cranial defect closure in the pediatric population

An Intact Periosteum is Required for Recombinant Human Jagged1 Guided Bone Regeneration in Calvaria Critical-size Defect Healing

The need to promote calvaria bone healing as a consequence of injury or craniotomy is a major clinical issue. Previous reports tested recombinant human Jagged1 (rhJagged1) treatment for critical-size calvaria defects in the absence of periosteum, and this resulted in significant new bone formation. As the periosteum contributes to healing by serving as a source of progenitor cells, the present study aimed to examine whether significantly more bone is formed when the periosteum is intact for using rhJagged1 to treat critical-size parietal bone defects in mice. Fifteen healthy adult mice, 34 to 65 weeks of age, 26.9 to 48.2 g, were divided into different groups that compared the critical-size defects treated with either phosphate-buffered saline or rhJagged1 protein in either the presence or absence of periosteum. The results indicated that more bone was formed in the presence of periosteum when rhJagged1 is delivered [35% bone volume per tissue volume (BV/TV); P = 0.02] relative to nonperiosteum. Recombinant human Jagged1 protein delivered in the absence of periosteum had the next most new bone formed (25% BV/TV). Defects with phosphate-buffered saline delivered in the absence or presence of periosteum had the least new bone formed (15% and 18% BV/TV, respectively; P = 0.48). The results also show that rhJagged1 does not form ectopic or hypertrophic bone. The usage of rhJagged1 to treat critical-size defects in calvaria is promising clinically, but to maximize clinical efficacy it will require that the periosteum be intact on the noninjured portions of calvaria.

Three-Dimensionally-Printed Bioactive Ceramic Scaffolds: Construct Effects on Bone Regeneration

BACKGROUND/PURPOSE

The utilization of three-dimensionally (3D)-printed bioceramic scaffolds composed of beta-tricalcium phosphate in conjunction with dipyridamole have shown to be effective in the osteogenesis of critical bone defects in both skeletally immature and mature animals. Furthermore, previous studies have proven the dura and pericranium's osteogenic capacity in the presence of 3D-printed scaffolds; however, the effect galea aponeurotica on osteogenesis in the presence of 3D scaffolds remains unclear.

METHOD/DESCRIPTION

Critical-sized (11 mm) bilateral calvarial defects were created in 35-day old rabbits (n = 7). Two different 3D scaffolds were created, with one side of the calvaria being treated with a solid nonporous cap and the other with a fully porous cap. The solid cap feature was designed with the intention of preventing communication of the galea and the ossification site, while the porous cap permitted such communication. The rabbits were euthanized 8 weeks postoperatively. Calvaria were analyzed using microcomputed tomography, 3D reconstruction, and nondecalcified histologic sectioning in order assess differences in bone growth between the two types of scaffolding.

RESULTS

Scaffolds with the solid (nonporous) cap yielded greater percent bone volume (P = 0.012) as well as a greater percent potential bone (P = 0.001) compared with the scaffolds with a porous cap. The scaffolds with porous caps also exhibited a greater percent volume of soft tissue (P < 0.001) presence. There were no statistically significant differences detected in scaffold volume.

CONCLUSION

A physical barrier preventing the interaction of the galea aponeurotica with the scaffold leads to significantly increased calvarial bone regeneration in comparison with the scaffolds allowing for this interaction. The galea's interaction also leads to more soft tissue growth hindering the in growth of bone in the porous-cap scaffolds.

Combinatorial effect of nano whitlockite/nano bioglass with FGF-18 in an injectable hydrogel for craniofacial bone regeneration

Comparing the bone regeneration potential of nano whitlockite or nano bioglass in combination with FGF-18, loaded in an injectable, shear-thinning chitin/PLGA hydrogel for craniofacial bone regeneration.

Bone Tissue Engineering in the Growing Calvaria Using Dipyridamole-Coated, Three-Dimensionally-Printed Bioceramic Scaffolds: Construct Optimization and Effects on Cranial Suture Patency

BACKGROUND

Three-dimensionally-printed bioceramic scaffolds composed of β-tricalcium phosphate delivering the osteogenic agent dipyridamole can heal critically sized calvarial defects in skeletally mature translational models. However, this construct has yet to be applied to growing craniofacial models. In this study, the authors implanted three-dimensionally-printed bioceramic/dipyridamole scaffolds in a growing calvaria animal model and evaluated bone growth as a function of geometric scaffold design and dipyridamole concentration. Potential adverse effects on the growing suture were also evaluated.

METHODS

Bilateral calvarial defects (10 mm) were created in 5-week-old (approximately 1.1 kg) New Zealand White rabbits (n = 16 analyzed). Three-dimensionally-printed bioceramic scaffolds were constructed in quadrant form composed of varying pore dimensions (220, 330, and 500 μm). Each scaffold was coated with collagen and soaked in varying concentrations of dipyridamole (100, 1000, and 10,000 μM). Controls consisted of empty defects. Animals were killed 8 weeks postoperatively. Calvariae were analyzed using micro-computed tomography, three-dimensional reconstruction, and nondecalcified histologic sectioning.

RESULTS

Scaffold-induced bone growth was statistically greater than bone growth in empty defects (p = 0.02). Large scaffold pores, 500 μm, coated in 1000 μM dipyridamole yielded the most bone growth and lowest degree of scaffold presence within the defect. Histology showed vascularized woven and lamellar bone along with initial formation of vascular canals within the scaffold lattice. Micro-computed tomographic and histologic analysis revealed patent calvarial sutures without evidence of ectopic bone formation across all dipyridamole concentrations.

CONCLUSION

The authors present an effective pediatric bone tissue-engineering scaffold design and dipyridamole concentration that is effective in augmentation of calvarial bone generation while preserving cranial suture patency.

Regeneration of a Pediatric Alveolar Cleft Model Using Three-Dimensionally Printed Bioceramic Scaffolds and Osteogenic Agents: Comparison of Dipyridamole and rhBMP-2

BACKGROUND

Alveolar clefts are traditionally treated with secondary bone grafting, but this is associated with morbidity and graft resorption. Although recombinant human bone morphogenetic protein-2 (rhBMP-2) is under investigation for alveolar cleft repair, safety concerns remain. Dipyridamole is an adenosine receptor indirect agonist with known osteogenic potential. This study compared dipyridamole to rhBMP-2 at alveolar cleft defects delivered using bioceramic scaffolds.

METHODS

Skeletally immature New Zealand White rabbits underwent unilateral, 3.5 × 3.5-mm alveolar resection adjacent to the growing suture. Five served as negative controls. The remaining defects were reconstructed with three-dimensionally printed bioceramic scaffolds coated with 1000 μm of dipyridamole (n = 6), 10,000 μm of dipyridamole (n = 7), or 0.2 mg/ml of rhBMP-2 (n = 5). At 8 weeks, new bone was quantified. Nondecalcified histologic evaluation was performed, and new bone was evaluated mechanically. Statistical analysis was performed using a generalized linear mixed model and the Wilcoxon rank sum test.

RESULTS

Negative controls did not heal, whereas new bone formation bridged all three-dimensionally printed bioceramic treatment groups. The 1000-μm dipyridamole scaffolds regenerated 28.03 ± 7.38 percent, 10,000-μm dipyridamole scaffolds regenerated 36.18 ± 6.83 percent (1000 μm versus 10,000 μm dipyridamole; p = 0.104), and rhBMP-2-coated scaffolds regenerated 37.17 ± 16.69 percent bone (p = 0.124 versus 1000 μm dipyridamole, and p = 0.938 versus 10,000 μm dipyridamole). On histology/electron microscopy, no changes in suture biology were evident for dipyridamole, whereas rhBMP-2 demonstrated early signs of suture fusion. Healing was highly cellular and vascularized across all groups. No statistical differences in mechanical properties were observed between either dipyridamole or rhBMP-2 compared with native bone.

CONCLUSION

Dipyridamole generates new bone without osteolysis and early suture fusion associated with rhBMP-2 in skeletally immature bone defects.

Safety and Efficacy of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) in Craniofacial Surgery

Recombinant human bone morphogenetic protein-2 (rhBMP-2) is one of the most commonly used osteogenic agents in the craniofacial skeleton. This study reviews the safety and efficacy of rhBMP-2 as applied to craniofacial reconstruction and assesses the level of scientific evidence currently available.

Long-Term Characterization of Cranial Defects After Surgical Correction for Single-Suture Craniosynostosis

INTRODUCTION

Craniosynostosis is typically corrected surgically within the first year of life through cranial vault reconstruction. These procedures often leave open calvarial defects at the time of surgery, which are anticipated to close over time in a large proportion of cases. However, residual calvarial defects may result as long-term sequelae from cranial vault remodeling. When larger defects are present, they may necessitate further reconstruction for closure.Better understanding of the calvarial osseous healing process may help to identify which defects will resolve or shrink to acceptable size and which will require further surgery. Our study aims to assess the long-term changes in defect size after cranial vault reconstruction for craniosynostosis.

METHODS

One-year postoperative and long-term computed tomography scans were retrieved from the craniofacial anomalies archive. Analysis used custom software. All defects above the size of 1 cm were analyzed and tracked for calvarial location, surface area, and circularity. Monte Carlo simulation was performed to model the effect of initial defect size on the rate of defect closure.

RESULTS

We analyzed a total of 74 defects. The mean ± SD initial defect surface area was 3.27 ± 3.40 cm. The mean ± SD final defect surface area was 1.71 ± 2.54 cm. The mean ± SD percent decrease was 55.06% ± 28.99%. There was a significant difference in the percentage decrease of defects in the parietal and frontoparietal locations: 68.4% and 43.7%, respectively (P = 0.001). Monte Carlo simulation results suggest that less than 10% of defects above the size of 9 cm will close to the size of 2.5 cm or less.

CONCLUSIONS

We describe and make available a novel validated method of measuring cranial defects. We find that the large majority of initial defects greater than 9 cm remain at least 1 in in size (2.5 cm) 1 year postoperatively. In addition, there appear to be regional differences in closure rates across the cranium, with frontoparietal defects closing more slowly than those in the parietal region. This information will aid surgeons in the decision-making process regarding cranioplasty after craniosynostosis correction.

Bone morphogenetic protein-2 and bone therapy: successes and pitfalls

Objectives

Bone morphogenetic proteins (BMPs), more specifically BMP-2, are being increasingly used in orthopaedic surgery due to advanced research into osteoinductive factors that may enhance and improve bone therapy. There are many areas in therapy that BMP-2 is being applied to, including dental treatment, open tibial fractures, cancer and spinal surgery. Within these areas of treatment, there are many reports of successes and pitfalls. This review explores the use of BMP-2 and its successes, pitfalls and future prospects in bone therapy.

Methods

The PubMed database was consulted to compile this review.

Key findings

With successes in therapy, there were descriptions of a more rapid healing time with no signs of rejection or infection attributed to BMP-2 treatment. Pitfalls included BMP-2 ‘off-label’ use, which lead to various adverse effects.

Conclusions

Our search highlighted that optimising treatment with BMP-2 is a direction that many researchers are exploring, with areas of current research interest including concentration and dose of BMP-2, carrier type and delivery.

Continuous delivery of rhBMP2 and rhVEGF165 at a certain ratio enhances bone formation in mandibular defects over the delivery of rhBMP2 alone--An experimental study in rats

The aim of the present study was to test the hypothesis that different amounts of vascular endothelial growth factor and bone morphogenic protein differentially affect bone formation when applied for repair of non-healing defects in the rat mandible. Porous composite PDLLA/CaCO3 carriers were fabricated as slow release carriers and loaded with rhBMP2 and rhVEGF165 in 10 different dosage combinations using gas foaming with supercritical carbon dioxide. They were implanted in non-healing defects of the mandibles of 132 adult Wistar rats with additional lateral augmentation. Bone formation was assessed both radiographically (bone volume) and by histomorphometry (bone density). The use of carriers with a ratio of delivery of VEGF/BMP between 0.7 and 1.2 was significantly related to the occurrence of significant increases in radiographic bone volume and/or histologic bone density compared to the use of carriers with a ratio of delivery of ≤ 0.5 when all intervals and all outcome parameters were considered. Moreover, simultaneous delivery at this ratio helped to "save" rhBMP2 as both bone volume and bone density after 13 weeks were reached/surpassed using half the dosage required for rhBMP2 alone. It is concluded, that the combined delivery of rhVEGF165 and rhBMP2 for repair of critical size mandibular defects can significantly enhance volume and density of bone formation over delivery of rhBMP2 alone. It appears from the present results that continuous simultaneous delivery of rhVEGF165 and rhBMP2 at a ratio of approximately 1 is favourable for the enhancement of bone formation.

Opposing TNF-α/IL-1β- and BMP-2-activated MAPK signaling pathways converge on Runx2 to regulate BMP-2-induced osteoblastic differentiation

In patients who were treated with exogenous BMP-2 to repair bone fractures or defects, the levels of the inflammatory cytokines such as TNF-α and IL-1β in sera are significantly elevated, which may affect the outcome of bone regeneration. Mitogen-activated protein kinase (MAPK) cascades such as extracellular signal-regulated kinase 1/2 (ERK1/2), p38, and c-Jun NH2-terminal kinase 1/2 (JNK1/2) have a crucial role in osteogenic differentiation and are activated by both BMP-2 and TNF-α/IL-1β. However, previous studies suggested that the effects of BMP-2 and TNF-α/IL-1β in osteoblastic differentiation are opposite. Here, we investigated the exact role of MAPKs in a BMP-2 and TNF-α/IL-1β co-existed condition. Treatment with TNF-α/IL-1β inhibited BMP-2-induced alkaline phosphatase activity, calcium deposition, osteogenic transcriptional factor Runx2, and the expression of osteogenic markers in C2C12 and MC3T3-E1 cells. This inhibitory effect was independent of the canonical BMP/Smad pathway, suggesting the presence of an alternate regulatory pathway for BMP-2-induced Runx2 activity and subsequent osteoblastic differentiation. We then confirmed that BMP-2, TNF-α, and IL-1β alone can activate p38, ERK1/2, and JNK1/2, respectively. However, only inhibition of p38 and ERK1/2 signaling were required to modulate BMP-2-induced Runx2 expression. Finally, we determined that TNF-α/IL-1β decreased BMP-2-induced Runx2 expression through the activation of p38 and ERK1/2 signaling. Furthermore, strong activation of p38 and ERK1/2 signaling by transfection with CA-MKK3 or CA-MEK1 inhibited BMP-2-induced Runx2 expression and osteoblastic differentiation in C2C12 and MC3T3-E1 cells. Based on these results, we conclude that TNF-α/IL-1β- and BMP-2-activated p38 and ERK1/2 signaling have opposing roles that converge on Runx2 to regulate osteoblastic differentiation. The elucidation of these mechanisms may hasten the development of new strategies and improve the osteoinductive efficacy of BMP-2 in the clinic to enhance osteoblastic differentiation and bone formation.