Effective delivery of volatile biocides employing mesoporous silicates for treating biofilms

Characterization and Release Mechanisms of Aerogel-Encapsulated Biocide Crystals for Low-Loading and High-Utilization Antifouling Coatings

Silica aerogel-encapsulated biocide crystals can potentially enhance the protection efficiency of antifouling coatings, thereby lowering the impact on nontarget aquatic life. In the present study, copper pyrithione (CuPT) crystals are encapsulated by silica aerogel to obtain loadings of 50-80 wt % CuPT. For optimal design of the heterogeneous particles and mapping of the underlying biocide release mechanisms, the aerogel-encapsulated biocide crystals are characterized by scanning (transmission) electron microscopy, energy-dispersive X-ray spectroscopy, thermal gravimetric analysis, mercury intrusion porosity, Brunauer-Emmett-Teller analysis, and light scattering. The microscopic examination demonstrates that the elongated CuPT crystals are encapsulated by a thin highly porous silica layer. When varying the CuPT loading of the aerogels, it is possible to tune the particle size, pore volume, and specific surface area of the aerogels. Furthermore, this study suggests that the hydrophilic aerogel-encapsulated CuPT, when used in antifouling coatings, attracts seawater and contributes to an efficient controlled release of active CuPT.

The Efficiency of Biocidal Silica Nanosystems for the Conservation of Stone Monuments: Comparative In Vitro Tests against Epilithic Green Algae

In the last decade, worldwide research has focused on innovative natural biocides and the development of organic and inorganic nanomaterials for long-lasting reliability. In this work, the biocide effects of two different biocides encapsulated in two different silica nanosystems for a multifunctional coating have been performed through in vitro tests, by using Chlorococcum sp. as a common stone biodeteriogen. Zosteric sodium salt (ZS), a green biocide, was compared with the commercial biocide, 2-mercaptobenzothiazole (MBT), widely used in the treatment of cultural heritage. The analyzed systems are the following: silica nanocapsules (NC) and silica nanoparticles (MNP) not loaded with biocides, two nanosystems loaded with ZS and MBT, and free biocides. The qualitative and quantitative evaluations of biocide efficiency were performed periodically, analyzing pigment autofluorescence to discriminate between active and inactive/dead cells. The analyses showed multiple differences. All the nanocontainers presented an initial reduction in chlorophyll’s autofluorescence. For the free biocide, the results highlighted higher efficiency for MBT than ZS. Finally, the nanosystems loaded with the different biocides highlighted a higher activity for nanocontainers loaded with the commercial biocide than the green product, and better efficiency for MNP in comparison with NC.

Ionic Systems and Nanomaterials as Antiseptic and Disinfectant Agents for Surface Applications: A Review

Antiseptics and disinfectants are extensively used for a variety of topical and hard-surface applications. A wide variety of biocides as active chemical agents is found in these products, including alcohols, phenols, iodine, and chlorine. Many of these active agents demonstrate broad-spectrum antimicrobial activity; however, the mode of action of these agents is not well-documented. This review is focused on several examples of ionic systems based on ionic surfactants and ionic liquids as well as nanomaterials and nanoparticles acting as antiseptics and disinfectants for surfaces. It is important to note that many of these biocides may be used singly or in combination in a variety of products, which vary considerably in activity against microorganisms. Antimicrobial activity can be influenced by several factors such as formulation effects, presence of an organic load, synergy, temperature, dilution, and test method. The most promissory compounds based on ionic systems and nanomaterials published in mainly the last decade is chronologically reported in this review.

New Functionalized Macroparticles for Environmentally Sustainable Biofilm Control in Water Systems

Reverse osmosis (RO) depends on biocidal agents to control the operating costs associated to biofouling, although this implies the discharge of undesired chemicals into the aquatic environment. Therefore, a system providing pre-treated water free of biocides arises as an interesting solution to minimize the discharge of chemicals while enhancing RO filtration performance by inactivating bacteria that could form biofilms on the membrane system. This work proposes a pretreatment approach based on the immobilization of an industrially used antimicrobial agent (benzalkonium chloride—BAC) into millimetric aluminum oxide particles with prior surface activation with DA—dopamine. The antimicrobial efficacy of the functionalized particles was assessed against Escherichia coli planktonic cells through culturability and cell membrane integrity analysis. The results showed total inactivation of bacterial cells within five min for the highest particle concentration and 100% of cell membrane damage after 15 min for all concentrations. When reusing the same particles, a higher contact time was needed to reach the total inactivation, possibly due to partial blocking of immobilized biocide by dead bacteria adhering to the particles and to the residual leaching of biocide. The overall results support the use of Al₂O₃-DA-BAC particles as antimicrobial agents for sustainable biocidal applications in continuous water treatment systems.

Nanoencapsulation of Plant Volatile Organic Compounds to Improve Their Biological Activities

Plant volatile organic compounds (volatiles) are secondary plant metabolites that play crucial roles in the reproduction, defence, and interactions with other vegetation. They have been shown to exhibit a broad range of biological properties and have been investigated for antimicrobial and anticancer activities. In addition, they are thought be more environmentally friendly than many other synthetic chemicals 1. Despite these facts, their applications in the medical, food, and agricultural fields are considerably restricted due to their volatilities, instabilities, and aqueous insolubilities. Nanoparticle encapsulation of plant volatile organic compounds is regarded as one of the best strategies that could lead to the enhancement of the bioavailability and biological activity of the volatile compounds by overcoming their physical limitations and promoting their controlled release and cellular absorption. In this review, we will discuss the biosynthesis and analysis of plant volatile organic compounds, their biological activities, and limitations. Furthermore, different types of nanoparticle platforms used to encapsulate the volatiles and the biological efficacies of nanoencapsulated volatile organic compounds will be covered.

Current advances in plant-microbe communication via volatile organic compounds as an innovative strategy to improve plant growth

Volatile organic compounds (VOCs) emitted by microorganisms have demonstrated an important role to improve growth and tolerance against abiotic stress on plants. Most studies have used Arabidopsis thaliana as a model plant, extending to other plants of commercial interest in the last years. Interestingly, the microbial VOCs are characterized by its biodegradable structure, quick action, absence of toxic substances, and acts at lower concentration to regulate plant physiological changes. These compounds modulate plant physiological processes such as phytohormone pathways, photosynthesis, nutrient acquisition, and metabolisms. Besides, the regulation of gene expression associated with cell components, biological processes, and molecular function are triggered by microbial VOCs. Otherwise, few studies have reported the important role of VOCs for confer plant tolerance to abiotic stress, such as drought and salinity. Although VOCs have shown an efficient action to enhance the plant growth under controlled conditions, there are still great challenges for their greenhouse or field application. Therefore, in this review, we summarize the current knowledge about the technical procedures, study cases, and physiological mechanisms triggered by microbial VOCs to finally discuss the challenges of its application in agriculture.

Delivery of Natural Agents by Means of Mesoporous Silica Nanospheres as a Promising Anticancer Strategy

Natural prodrugs derived from different natural origins (e.g., medicinal plants, microbes, animals) have a long history in traditional medicine. They exhibit a broad range of pharmacological activities, including anticancer effects in vitro and in vivo. They have potential as safe, cost-effective treatments with few side effects, but are lacking in solubility, bioavailability, specific targeting and have short half-lives. These are barriers to clinical application. Nanomedicine has the potential to offer solutions to circumvent these limitations and allow the use of natural pro-drugs in cancer therapy. Mesoporous silica nanoparticles (MSNs) of various morphology have attracted considerable attention in the search for targeted drug delivery systems. MSNs are characterized by chemical stability, easy synthesis and functionalization, large surface area, tunable pore sizes and volumes, good biocompatibility, controlled drug release under different conditions, and high drug-loading capacity, enabling multifunctional purposes. In vivo pre-clinical evaluations, a significant majority of results indicate the safety profile of MSNs if they are synthesized in an optimized way. Here, we present an overview of synthesis methods, possible surface functionalization, cellular uptake, biodistribution, toxicity, loading strategies, delivery designs with controlled release, and cancer targeting and discuss the future of anticancer nanotechnology-based natural prodrug delivery systems.

Formulation of Mesoporous Silica Nanoparticles for Controlled Release of Antimicrobials for Stone Preventive Conservation

The biotic deterioration of artifacts of archaeological and artistic interest mostly relies on the action of microorganisms capable of thriving under the most disparate environmental conditions. Thus, to attenuate biodeterioration phenomena, biocides can be used by the restorers to prevent or slow down the microbial growth. However, several factors such as biocide half-life, its wash-out because of environmental conditions, and its limited time of action make necessary its application repeatedly, leading to negative economic implications. Sound and successful treatments are represented by controlled release systems (CRSs) based on porous materials. Here, we report on the design and development of a CRS system based on mesoporous silica nanoparticles (MSNs), as a carrier, and loaded with a biocide. MSNs, with a diameter of 55 nm and cylindrical pores of ca. 3-8 nm arranged as parallel arrays concerning the NP diameter, and with 422 m²/g of specific surface area were synthesized by the sol-gel method assisted by oil in water emulsion. Biocide loading and release were carried out in water and monitored by UV-Vis Spectroscopy; in addition, microbiological assay was performed using as control the MCM-41 mesoporous silica loaded with the same biocide. The role of specific supramolecular interaction in regulating the release is discussed. Further, we demonstrated that this innovative formulation was useful in inhibiting the in vitro growth of Kocuria rhizophila, an environmental Gram-positive bacterial strain. Besides, the CRS here prepared reduced the bacterial biomass contaminating a real case study (i.e., stone derived from the Santa Margherita cave located in Sicily, Italy), after several months of treatment thus opening for innovative treatments of deteriorated stone artifacts.

Nanoparticles and its biomedical applications in health and diseases: special focus on drug delivery

Nanotechnology is an emerging technology that deals with nanosized particles possessing crucial research roles and application. Disciplines like chemistry, biology, physics, engineering, materials science, and health sciences provide an accumulated knowledge of nanotechnology. Nonetheless, it has vast submissions precisely in biology, electronics, and medicine. Aimed at drug delivery system, nanoparticles are based on the mechanism of entrapment of the drugs or biomolecules into the interior structure of the particles; another mechanism could be that the drugs or the biomolecules can be absorbed onto the exterior surfaces of the particles. Currently, nanoparticles (NPs) are used in the delivery of drugs, proteins, genes, vaccines, polypeptides, nucleic acids, etc. In recent years, various applications of the drug delivery system via NPs have encountered an enormous position sector like pharmaceutical, medical, biological, and others. Considering the impact of NPs in drug delivery systems, this review focuses on the detailed profile of NPs, its impact on biology and medicine, and their commercialization prospects.

Zein/MCM-41 Nanocomposite Film Incorporated with Cinnamon Essential Oil Loaded by Modified Supercritical CO2 Impregnation for Long-Term Antibacterial Packaging

Antimicrobial medicine and food packages based on bio-based film containing essential oils have attracted great attention worldwide. However, the controlled release of essential oils from these film nanocomposites is still a big challenge. In this study, a long-term antibacterial film nanocomposite composed of zein film and cinnamon essential oil (CEO) loaded MCM-41 silica nanoparticles was prepared. The CEO was loaded into MCM-41 particles via modified supercritical impregnation efficiently with a high drug load (>40 wt%). The morphologies of the prepared nanoparticles and film nanocomposite were characterized by a scanning electron microscope. The release behaviors of CEO under different temperatures, high humidity, continuous illumination and in phosphate buffer solution (PBS) solution were investigated. The results showed that the film nanocomposite had an outstanding release-control effect. The addition of MCM-41 nanoparticles also improved the mechanical properties of zein films. The antibacterial effect of CEO was significantly prolonged by the film nanocomposite; indicating the CEO film nanocomposite fabricated via modified supercritical CO₂ impregnation was a potential long-term antibacterial medicine or food package material.

Biocide Potentiation Using Cinnamic Phytochemicals and Derivatives

Surface disinfection is of utmost importance in the prevention of bacterial infections. This study aims to assess the ability of ten phytochemicals and related derivatives as potentiators of two commonly used biocides-cetyltrimethylammonium bromide (CTAB) and lactic acid (LA). LA in combination with cinnamic, hydrocinnamic, α-methylcinnamic, and α-fluorocinnamic acids had a factional inhibitory concentration index (FICI) ≤ 1 for Escherichia coli and Staphylococcus aureus. Several phytochemicals/derivatives in combination with biocides improved the biocidal efficacy against early sessile bacteria. The most effective combination was LA with allyl cinnamate (2.98 ± 0.76 log CFU.cm^-2 reduction) against E. coli. The combination with CTAB was successful for most phytochemicals/derivatives with a maximum bactericidal efficacy against sessile E. coli when combined with allyl cinnamate (2.20 ± 0.07 log CFU.cm^-2 reduction) and for S. aureus when combined with α-methylcinnamic acid (1.68 ± 0.30 log CFU.cm^-2 reduction). This study highlights the potential of phytochemicals and their derivatives to be used in biocide formulations.

An analytical approach for quantifying the influence of nanoparticle polydispersity on cellular delivered dose

Nanoparticles provide a promising approach for the targeted delivery of therapeutic, diagnostic and imaging agents in the body. However, it is not yet fully understood how the physico-chemical properties of the nanoparticles influence cellular association and uptake. Cellular association experiments are routinely performed in an effort to determine how nanoparticle properties impact the rate of nanoparticle–cell association. To compare experiments in a meaningful manner, the association data must be normalized by the amount of nanoparticles that arrive at the cells, a measure referred to as the delivered dose. The delivered dose is calculated from a model of nanoparticle transport through fluid. A standard assumption is that all nanoparticles within the population are monodisperse, namely the nanoparticles have the same physico-chemical properties. We present a semi-analytic solution to a modified model of nanoparticle transport that allows for the nanoparticle population to be polydisperse. This solution allows us to efficiently analyse the influence of polydispersity on the delivered dose. Combining characterization data obtained from a range of commonly used nanoparticles and our model, we find that the delivered dose changes by more than a factor of 2 if realistic amounts of polydispersity are considered.

Mesoporous Silica-Based Materials with Bactericidal Properties

Bacterial infections are the main cause of chronic infections and even mortality. In fact, due to extensive use of antibiotics and, then, emergence of antibiotic resistance, treatment of such infections by conventional antibiotics has become a major concern worldwide. One of the promising strategies to treat infection diseases is the use of nanomaterials. Among them, mesoporous silica materials (MSMs) have attracted burgeoning attention due to high surface area, tunable pore/particle size, and easy surface functionalization. This review discusses how one can exploit capacities of MSMs to design and fabricate multifunctional/controllable drug delivery systems (DDSs) to combat bacterial infections. At first, the emergency of bacterial and biofilm resistance toward conventional antimicrobials is described and then how nanoparticles exert their toxic effects upon pathogenic cells is discussed. Next, the main aspects of MSMs (e.g., physicochemical properties, multifunctionality, and biosafety) which one should consider in the design of MSM-based DDSs against bacterial infections are introduced. Finally, a comprehensive analysis of all the papers published dealing with the use of MSMs for delivery of antibacterial chemicals (antimicrobial agents functionalized/adsorbed on mesoporous silica (MS), MS-loaded with antimicrobial agents, gated MS-loaded with antimicrobial agents, MS with metal-based nanoparticles, and MS-loaded with metal ions) is provided.