Membrane capacitance of thousands of single white blood cells

Microfluidic Impedance Cytometry Enabled One-Step Sample Preparation for Efficient Single-Cell Mass Spectrometry

Single-cell mass spectrometry (MS) is significant in biochemical analysis and holds great potential in biomedical applications. Efficient sample preparation like sorting (i.e., separating target cells from the mixed population) and desalting (i.e., moving the cells off non-volatile salt solution) is urgently required in single-cell MS. However, traditional sample preparation methods suffer from complicated operation with various apparatus, or insufficient performance. Herein, a one-step sample preparation strategy by leveraging label-free impedance flow cytometry (IFC) based microfluidics is proposed. Specifically, the IFC framework to characterize and sort single-cells is adopted. Simultaneously with sorting, the target cell is transferred from the local high-salinity buffer to the MS-compatible solution. In this way, one-step sorting and desalting are achieved and the collected cells can be directly fed for MS analysis. A high sorting efficiency (>99%), cancer cell purity (≈87%), and desalting efficiency (>99%), and the whole workflow of impedance-based separation and MS analysis of normal cells (MCF-10A) and cancer cells (MDA-MB-468) are verified. As a standalone sample preparation module, the microfluidic chip is compatible with a variety of MS analysis methods, and envisioned to provide a new paradigm in efficient MS sample preparation, and further in multi-modal (i.e., electrical and metabolic) characterization of single-cells.

Label-free and noninvasive analysis of microorganism surface epistructures at the single-cell level

Cell surface properties of microorganisms provide abundant information for their physiological status and fate choice. However, current methods for analyzing cell surface properties require labeling or fixation, which can alter the cell activity. This study establishes a label-free, rapid, noninvasive, and quantitative analysis of cell surface properties, including the presence and the dimension of epistructure, down to the single-cell level and at the nanometer scale. Simultaneously, electrorotation provides dielectric properties of intracellular contents. With the combined information, the growth phase of microalgae cells can be identified. The measurement is based on electrorotation of single cells, and an electrorotation model accounting for the surface properties is developed to properly interpret experimental data. The epistructure length measured by electrorotation is validated by scanning electron microscopy. The measurement accuracy is satisfactory in particular in the case of microscale epistructures in the exponential phase and nanoscale epistructures in the stationary phase. However, the measurement accuracy for nanoscale epistructures on cells in the exponential phase is offset by the effect of a thick double layer. Lastly, a diversity in epistructure length distinguishes exponential phase from stationary phase.

Developments of Conventional and Microfluidic Flow Cytometry Enabling High-Throughput Characterization of Single Cells

This article first reviews scientific meanings of single-cell analysis by highlighting two key scientific problems: landscape reconstruction of cellular identities during dynamic immune processes and mechanisms of tumor origin and evolution. Secondly, the article reviews clinical demands of single-cell analysis, which are complete blood counting enabled by optoelectronic flow cytometry and diagnosis of hematologic malignancies enabled by multicolor fluorescent flow cytometry. Then, this article focuses on the developments of optoelectronic flow cytometry for the complete blood counting by comparing conventional counterparts of hematology analyzers (e.g., DxH 900 of Beckman Coulter, XN-1000 of Sysmex, ADVIA 2120i of Siemens, and CELL-DYN Ruby of Abbott) and microfluidic counterparts (e.g., microfluidic impedance and imaging flow cytometry). Future directions of optoelectronic flow cytometry are indicated where intrinsic rather than dependent biophysical parameters of blood cells must be measured, and they can replace blood smears as the gold standard of blood analysis in the near future.

Inherent Single-Cell Bioelectrical Parameters of Thousands of Neutrophils, Eosinophils and Basophils Derived from Impedance Flow Cytometry

Single-cell bioelectrical properties are commonly used for blood cell phenotyping in a label-free manner. However, previously reported inherent single-cell bioelectrical parameters (e.g., diameter D_c , specific membrane capacitance C_sm and cytoplasmic conductivity σ_cy ) of neutrophils, eosinophils and basophils were obtained from only tens of individual cells with limited statistical significance. In this study, granulocytes were separated into neutrophils, eosinophils and basophils based on fluorescent flow cytometry, which were further aspirated through a constriction-microchannel impedance flow cytometry for electrical property characterization. Based on this microfluidic impedance flow cytometry, single-cell values of D_c , C_sm and σ_cy were measured as 10.25 ± 0.66 μm, 2.17 ± 0.30 μF/cm² , and 0.37 ± 0.05 S/m for neutrophils (n_cell = 9 442); 9.73 ± 0.51 μm, 2.07 ± 0.19 μF/cm² , and 0.30 ± 0.04 S/m for eosinophils (n_cell = 2 982); 9.75 ± 0.49 μm, 2.06 ± 0.17 μF/cm² , and 0.31 ± 0.04 S/m for basophils (n_cell = 5 377). Based on these inherent single-cell bioelectrical parameters, neural pattern recognition was conducted, producing classification rates of 80.8% (neutrophil vs. eosinophil), 77.7% (neutrophil vs. basophil) and 59.3% (neutrophil vs. basophil). These results indicate that as inherent single-cell bioelectrical parameters, D_c , C_sm and σ_cy can be used to classify neutrophils from eosinophils or basophils to some extent while they cannot be used to effectively distinguish eosinophils from basophils.

Inherent Bioelectrical Parameters of Hundreds of Thousands of Single Leukocytes Based on Impedance Flow Cytometry

As label-free biomarkers, bioelectrical properties of single cells have been widely used in hematology analyzers for 3-part differential of leukocytes, in which, however, instrument dependent bioelectrical parameters (e.g., DC/AC impedance values) rather than inherent bioelectrical parameters (e.g., diameter D_c , specific membrane capacitance C_sm and cytoplasmic conductivity σ_cy ) were used, leading to poor comparisons among different instruments. In order to address this issue, this study collected inherent bioelectrical parameters from hundreds of thousands of white blood cells based on a home-developed impedance flow cytometry with corresponding 3-part differential of leukocytes realized. More specifically, leukocytes were separated into three major subtypes of granulocytes, monocytes and lymphocytes based on density gradient centrifugation. Then these separated cells were aspirated through a constriction-microchannel based impedance flow cytometry where inherent bioelectrical parameters of D_c , C_sm and σ_cy were quantified as 9.8 ± 0.7 μm, 2.06 ± 0.26 μF/cm² , and 0.34 ± 0.05 S/m for granulocytes (n_cell = 134 829); 10.4 ± 1.0 μm, 2.45 ± 0.48 μF/cm² , and 0.42 ± 0.08 S/m for monocytes (n_cell = 40 226); 8.0 ± 0.5 μm, 2.23 ± 0.34 μF/cm² , and 0.35 ± 0.08 S/m for lymphocytes (n_cell = 129 193). Based on these inherent bioelectrical parameters, neural pattern recognition was conducted, producing a high "classification accuracy" of 93.5% in classifying these three subtypes of leukocytes. These results indicate that as inherent bioelectrical parameters, D_c , C_sm and σ_cy can be used to electrically phenotype white blood cells in a label-free manner.

Classification of tumor subtypes leveraging constriction-channel based impedance flow cytometry and optical imaging

As label-free biomarkers, electrical properties of single cells have been widely used for cell-type classification and cell-status evaluation. However, as intrinsic bioelectrical markers, previously reported membrane capacitance and cytoplasmic resistance (e.g., specific membrane capacitance C_{specific membrane} and cytoplasmic conductivity σ_cytoplasm ) of tumor subtypes were derived from tens of single cells, lacking statistical significance due to low cell numbers. In this study, tumor subtypes were constructed based on phenotype (treatment with 4-methylumbelliferone) or genotype (knockdown of ROCK1) modifications and then aspirated through a constriction-channel based impedance flow cytometry to characterize single-cell C_{specific membrane} and σ_cytoplasm . Thousands of single tumor cells with phenotype modifications were measured, resulting in significant differences in 1.64 ± 0.43 μF/cm² vs. 1.55 ± 0.47 μF/cm² of C_{specific membrane} and 0.96 ± 0.37 S/m vs. 1.24 ± 0.47 S/m of σ_cytoplasm for 95C cells (792 cells of 95C-control vs. 1529 cells of 95C-pheno-mod); 2.56 ± 0.88 μF/cm² vs. 2.33 ± 0.56 μF/cm² of C_{specific membrane} and 0.83 ± 0.18 S/m vs. 0.93 ± 0.25 S/m of σ_cytoplasm for H1299 cells (962 cells of H1299-control vs. 637 cells of H1299-pheno-mod). Furthermore, thousands of single tumor cells with genotype modifications were measured, resulting in significant differences in 3.82 ± 0.92 vs. 3.18 ± 0.47 μF/cm² of C_{specific membrane} and 0.47 ± 0.05 vs. 0.52 ± 0.05 S/m of σ_cytoplasm (1100 cells of A549-control vs. 1100 cells of A549-geno-mod). These results indicate that as intrinsic bioelectrical markers, specific membrane capacitance and cytoplasmic conductivity can be used to classify tumor subtypes.

Double-peak signal features in microfluidic impedance flow cytometry enable sensitive measurement of cell membrane capacitance

The probing of individual cells at specific frequency regimes in a microfluidic impedance flow cytometer led to the observation of unusual "double peak" features in the reactive component of the resulting signal. The phenomenon was restricted to the lower frequencies (400-800 kHz) of the β-dispersion regime and its occurrence was facilitated by the co-planar microelectrode geometry in the device. To understand the reasons for this anomalous behaviour, the system was modelled using COMSOL. The simulated model agreed well with experimental observations and provided insight into the origins of this signal profile and the effect of various parameters on its behaviour. One of the most significant observations of this study was the high sensitivity of the features in the "double peak" profile to changes in cell membrane capacitance (CMC), compared to conventional "single peaks" of reactive impedance. This was consequently exploited to accurately distinguish populations of normal and glutaraldehyde treated erythrocytes based on variations in their CMC, indicating a drastic decrease in the CMC of treated cells. Additionally, we demonstrate the applicability of using this double peak effect to identify cell populations within a mixture of PBMCs. This study is an improvement over conventional approaches of measuring CMC via impedance flow cytometry by enabling the measurement of both cell size and cell membrane properties at a single frequency rather than using multiple frequencies. Using a single frequency significantly simplifies the system and reduces the associated costs. Additionally, this technique enables the measurement of CMC at relatively low frequencies.

Crossing constriction channel-based microfluidic cytometry capable of electrically phenotyping large populations of single cells

This paper presents a crossing constriction channel-based microfluidic system for high-throughput characterization of specific membrane capacitance (Csm) and cytoplasm conductivity (σcy) of single cells. In operations, cells in suspension were forced through the major constriction channel and instead of invading the side constriction channel, they effectively sealed the side constriction channel, which led to variations in impedance data. Based on an equivalent circuit model, these raw impedance data were translated into Csm and σcy. As a demonstration, the developed microfluidic system quantified Csm (3.01 ± 0.92 μF cm-2) and σcy (0.36 ± 0.08 S m-1) of 100 000 A549 cells, which could generate reliable results by properly controlling cell positions during their traveling in the crossing constriction channels. Furthermore, the developed microfluidic impedance cytometry was used to distinguish paired low- and high-metastatic carcinoma cell types of SACC-83 (ncell = ∼100 000) and SACC-LM cells (ncell = ∼100 000), distinguishing significant differences in both Csm (3.16 ± 0.90 vs. 2.79 ± 0.67 μF cm-2) and σcy (0.36 ± 0.06 vs.0.41 ± 0.08 S m-1). As high-throughput microfluidic impedance cytometry, this technique may add a new marker-free dimension to flow cytometry in single-cell analysis.

Evaluation of a new lymphocyte proliferation assay based on cyclic voltammetry; an alternative method

Lymphocyte proliferation assays are widely used to assess the cell-mediated immunity. Current in vitro testing methods that are being used have extensive applications but still more problematic, due to the technical complexity and the needs for specialized equipment and reagents. Electrochemical methods such as cyclic voltammetry represent a very promising tool for the development of label-free in vitro assays of cell proliferation and viability. Here, a novel procedure based on voltammetric behaviours of proliferating cells was fabricated. Results indicated that proliferation in cell cultures and whole blood can be monitored electrochemically using cyclic voltammetry. In the comparison with colorimetric (MTT) assay, cyclic voltammetry gave the best correlation with cell count data over a range of 1200-300,000 cells/well of a microplate. Besides the advantages of short assay duration (4 hours) and the rapidness, the possibility use of fresh blood without further processing, would give more accurate results because cells are monitoring in an intact environment. Cyclic voltammetry assay is an efficient analytical method, which can provide a simple platform for the electrochemical study of lymphocyte proliferation.