Neutron scanning reveals unexpected complexity in the enamel thickness of an herbivorous Jurassic reptile

Direct evidence of frugivory in the Mesozoic bird Longipteryx contradicts morphological proxies for diet

Diet is one of the most important aspects of an animal's ecology, as it reflects direct interactions with other organisms and shapes morphology, behavior, and other life history traits. Modern birds (Neornithes) have a highly efficient and phenotypically plastic digestive system, allowing them to utilize diverse trophic resources, and digestive function has been put forth as a factor in the selectivity of the end-Cretaceous mass extinction, in which only neornithine dinosaurs survived.1 Although diet is directly documented in several early-diverging avian lineages,2 only a single specimen preserves evidence of diet in Enantiornithes, the dominant group of terrestrial Cretaceous birds.3 Morphology-based predictions suggest enantiornithines were faunivores,4,5,6 although the absence of evidence contrasts with the high preservation potential and relatively longer gut-retention times of these diets. Longipteryx is an unusual Early Cretaceous enantiornithine with an elongate rostrum; distally restricted dentition7; large, recurved, and crenulated teeth8; and tooth enamel much thicker than other paravians.9 Statistical analysis of rostral length, body size, and tooth morphology predicts Longipteryx was primarily insectivorous.4,5 Contrasting with these results, two new specimens of Longipteryx preserve gymnosperm seeds within the abdominal cavity interpreted as ingesta. Like Jeholornis, their unmacerated preservation and the absence of gastroliths indicate frugivory.10 As in Neornithes,11 complex diets driven by the elevated energetic demands imposed by flight, secondary rostral functions, and phylogenetic influence impede the use of morphological proxies to predict diet in early-diverging avian lineages.

Show Me Your Teeth And I Will Tell You What You Eat: Differences in Tooth Enamel in Snakes with Different Diets

Teeth are composed of the hardest tissues in the vertebrate body and have been studied extensively to infer diet in vertebrates. The morphology and structure of enamel is thought to reflect feeding ecology. Snakes have a diversified diet, some species feed on armored lizards, others on soft invertebrates. Yet, little is known about how tooth enamel, and specifically its thickness, is impacted by diet. In this study, we first describe the different patterns of enamel distribution and thickness in snakes. Then, we investigate the link between prey hardness and enamel thickness and morphology by comparing the dentary teeth of 63 species of snakes. We observed that the enamel is deposited asymmetrically at the antero-labial side of the tooth. Both enamel coverage and thickness vary a lot in snakes, from species with thin enamel, only at the tip of the tooth to a full facet covered with enamel. There variations are related with prey hardness: snakes feeding on hard prey have a thicker enamel and a lager enamel coverage while species. Snakes feeding on softer prey have a thin enamel layer confined to the tip of the tooth.

Measuring Dental Enamel Thickness: Morphological and Functional Relevance of Topographic Mapping

The interest in the development of dental enamel thickness measurement techniques is connected to the importance of metric data in taxonomic assessments and evolutionary research as well as in other directions of dental studies. At the same time, advances in non-destructive imaging techniques and the application of scanning methods, such as micro-focus-computed X-ray tomography, has enabled researchers to study the internal morpho-histological layers of teeth with a greater degree of accuracy and detail. These tendencies have contributed to changes in established views in different areas of dental research, ranging from the interpretation of morphology to metric assessments. In fact, a significant amount of data have been obtained using traditional metric techniques, which now should be critically reassessed using current technologies and methodologies. Hence, we propose new approaches for measuring dental enamel thickness using palaeontological material from the territories of northern Vietnam by means of automated and manually operated techniques. We also discuss method improvements, taking into account their relevance for dental morphology and occlusion. As we have shown, our approaches demonstrate the potential to form closer links between the metric data and dental morphology and provide the possibility for objective and replicable studies on dental enamel thickness through the application of automated techniques. These features are likely to be effective in more profound taxonomic research and for the development of metric and analytical systems. Our technique provides scope for its targeted application in clinical methods, which could help to reveal functional changes in the masticatory system. However, this will likely require improvements in clinically applicable imaging techniques.

Modeling tooth enamel in FEA comparisons of skulls: Comparing common simplifications with biologically realistic models

Palaeontologists often use finite element analyses, in which forces propagate through objects with specific material properties, to investigate feeding biomechanics. Teeth are usually modeled with uniform properties (all bone or all enamel). In reality, most teeth are composed of pulp, dentine, and enamel. We tested how simplified teeth compare to more realistic models using mandible models of three reptiles. For each, we created models representing enamel thicknesses found in extant taxa, as well as simplified models (bone, dentine or enamel). Our results suggest that general comparisons of stress distribution among distantly related taxa do not require representation of dental tissues, as there was no noticeable effect on heatmap representations of stress. However, we find that representation of dental tissues impacts bite force estimates, although magnitude of these effects may differ depending on constraints. Thus, as others have shown, the detail necessary in a biomechanical model relates to the questions being examined.

New Approach to Dental Morphometric Research Based on 3D Imaging Techniques

Recent progress in imaging and image processing techniques has provided for improvements in odontological research in a variety of aspects. Thus, the presented method has been developed precisely in order to assess metrically 3D reconstructions of teeth. Rapidly and accurately obtained data of a wide range and appropriate density are sufficient enough for morphometric studies rather than tooth size assessments which are inherent to conventional techniques. The main contributions providing for holistic and objective morphometric analysis of teeth are the following: (1) interpretation of basic dental morphological features; (2) automated of orientational coordinate system setup based on tooth surface analysis; (3) new tooth morphometric parameters which could not be obtained through application of conventional odontometric techniques; (4) methodological novelty for automated odontomorphometric analysis pipeline. Application of tomographic imaging, which has been used for obtaining 3D models, expands the proposed method potential further through providing detailed and comprehensive reconstructions of teeth. The current study was conducted on unique material from the archaeological site of Sunghir related to the Upper Palaeolithic period. Metric assessments of external and internal morphological layers of teeth were performed in common orientation and sectioning. The proposed technique allowed more profound analysis of Sunghirian teeth which date back to the times of modern human morphology formation.

Sampling impacts the assessment of tooth growth and replacement rates in archosaurs: implications for paleontological studies

Dietary habits in extinct species cannot be directly observed; thus, in the absence of extraordinary evidence, they must be reconstructed with a combination of morphological proxies. Such proxies often include information on dental organization and function such as tooth formation time and tooth replacement rate. In extinct organisms, tooth formation times and tooth replacement rate are calculated, in part via extrapolation of the space between incremental lines in dental tissues representing daily growth (von Ebner Line Increment Width; VEIW). However, to date, little work has been conducted testing assumptions about the primary data underpinning these calculations, specifically, the potential impact of differential sampling and data extrapolation protocols. To address this, we tested a variety of intradental, intramandibular, and ontogentic sampling effects on calculations of mean VEIW, tooth formation times, and replacement rates using histological sections and CT reconstructions of a growth series of three specimens of the extant archosaurian Alligator mississippiensis. We find transect position within the tooth and transect orientation with respect to von Ebner lines to have the greatest impact on calculations of mean VEIW—a maximum number of VEIW measurements should be made as near to the central axis (CA) as possible. Measuring in regions away from the central axis can reduce mean VEIW by up to 36%, causing inflated calculations of tooth formation time. We find little demonstrable impact to calculations of mean VEIW from the practice of subsampling along a transect, or from using mean VEIW derived from one portion of the dentition to extrapolate for other regions of the dentition. Subsampling along transects contributes only minor variations in mean VEIW (<12%) that are dwarfed by the standard deviation (SD). Moreover, variation in VEIW with distance from the pulp cavity likely reflects idiosyncratic patterns related to life history, which are difficult to control for; however, we recommend increasing the number of VEIW measured to minimize this effect. Our data reveal only a weak correlation between mean VEIW and body length, suggesting minimal ontogenetic impacts. Finally, we provide a relative SD of mean VEIW for Alligator of 29.94%, which can be used by researchers to create data-driven error bars for tooth formation times and replacement rates in fossil taxa with small sample sizes. We caution that small differences in mean VEIW calculations resulting from non-standardized sampling protocols, especially in a comparative context, will produce inflated error in tooth formation time estimations that intensify with crown height. The same holds true for applications of our relative SD to calculations of tooth formation time in extinct taxa, which produce highly variable maximum and minimum estimates in large-toothed taxa (e.g., 718–1,331 days in Tyrannosaurus).

Thecodont tooth attachment and replacement in bolosaurid parareptiles

Permian bolosaurid parareptiles are well-known for having complex tooth crowns and complete tooth rows in the jaws, in contrast to the comparatively simple teeth and frequent replacement gaps in all other Paleozoic amniotes. Analysis of the specialized dentition of the bolosaurid parareptiles Bolosaurus from North America and Belebey from Russia, utilizing a combination of histological and tomographic data, reveals unusual patterns of tooth development and replacement. The data confirm that bolosaurid teeth have thecodont implantation with deep roots, the oldest known such example among amniotes, and independently evolved among much younger archosauromorphs (including dinosaurs and crocodilians) and among synapsids (including mammals). High-resolution CT scans were able to detect the density boundary between the alveolar bone and the jawbone, as confirmed by histology, and revealed the location and size of developing replacement teeth in the pulp cavity of functional teeth. Evidence provided by the paratype dentary of Belebey chengi indicates that replacement teeth are present along the whole tooth row at slightly different stages of development, with the ontogenetically more developed teeth anteriorly, suggesting that tooth replacement was highly synchronized. CT data also show tooth replacement is directly related to the presence of lingual pits in the jaw, and that migration of tooth buds occurs initially close to these resorption pits to a position immediately below the functional tooth within its pulp cavity. The size and complex shape of the replacement teeth in the holotype of Bolosaurus grandis indicate that the replacement teeth can develop within the pulp cavity to an advanced stage while the previous generation remains functional for an extended time, reminiscent of the condition seen in other amniotes with occluding dentitions, including mammals.

Evolution: Herbivore-Type Teeth in a Cretaceous Tuatara Relative

In a new study, LeBlanc and co-workers have discovered an unusually complex dentition in a fossil relative of the modern-day tuatara that features compound occlusal surfaces, thick and prismatic enamel, and a novel enamel-to-bone tooth attachment. This finding suggests that complex dentitions arose independently in several reptilian lineages.

Nature's design solutions in dental enamel: Uniting high strength and extreme damage resistance

The most important demand of today's high-performance materials is to unite high strength with extreme fracture toughness. The combination of withstanding large forces (strength) and resistance to fracture (toughness), especially preventing catastrophic material failure by cracking, is of utmost importance when it comes to structural applications of these materials. However, these two properties are commonly found to be mutually exclusive: strong materials are brittle and tough materials are soft. In dental enamel, nature has combined both properties with outstanding success - despite a limited number of available constituents. Made up of brittle mineral crystals arranged in a sophisticated hierarchical microstructure, enamel exhibits high stiffness and excellent toughness. Different species exhibit a variety of structural adaptations on varying scales in their dental enamel which optimise not only fracture toughness, but also hardness and abrasion behaviour. Nature's materials still outperform their synthetic counterparts due to these complex structure-property relationships that are not yet fully understood. By analysing structure variations and the underlying mechanical mechanisms systematically, design principles which are the key for the development of advanced synthetic materials uniting high strength and toughness can be formulated. STATEMENT OF SIGNIFICANCE: Dental enamel is a hard protective tissue that combines high strength with an exceptional resistance to catastrophic fracture, properties that in classical materials are commonly found to be mutually exclusive. The biological material is able to outperform its synthetic counterparts due to a sophisticated hierarchical microstructure. Between different species, microstructural adaptations can vary significantly. In this contribution, the different types of dental enamel present in different species are reviewed and connections between microstructure and (mechanical) properties are drawn. By consolidating available information for various species and reviewing it from a materials science point of view, design principles for the development of advanced biomimetic materials uniting high strength and toughness can be formulated.

Unique Tooth Morphology and Prismatic Enamel in Late Cretaceous Sphenodontians from Argentina

Mammals and reptiles have evolved divergent adaptations for processing abrasive foods. Mammals have occluding, diphyodont dentitions with taller teeth (hypsodonty), more complex occlusal surfaces, continuous tooth eruption, and forms of prismatic enamel that prolong the functional life of each tooth [1, 2]. The evolution of prismatic enamel in particular was a key innovation that made individual teeth more resilient to abrasion in early mammals [2-4]. In contrast, reptiles typically have thin, non-prismatic enamel, and shearing, polyphyodont dentitions with multi-cusped or serrated tooth crowns, multiple tooth rows, rapid tooth replacement rates, or batteries made of hundreds of teeth [5-9]. However, there are rare cases where reptiles have evolved alternative solutions to cope with abrasive diets. Here, we show that the combined effects of herbivory and an ancestral loss of tooth replacement in a lineage of extinct herbivorous sphenodontians, distant relatives of the modern tuatara (Sphenodon punctatus) [10], are associated with the evolution of wear-resistant and highly complex teeth. Priosphenodon avelasi, an extinct sphenodontian from the Cretaceous of Argentina, possesses a unique cone-in-cone dentition with overlapping generations of teeth forming a densely packed tooth file. Each tooth is anchored to its predecessor via a rearrangement of dental tissues that results in a novel enamel-to-bone tooth attachment. Furthermore, the compound occlusal surfaces, thickened enamel, and the first report of prismatic enamel in a sphenodontian are convergent strategies with those in some mammals, challenging the perceived simplicity of acrodont dentitions [11-15] and showcasing the reptilian capacity to produce complex and unusual dentitions.

Acherontiscus caledoniae: the earliest heterodont and durophagous tetrapod

The enigmatic tetrapod Acherontiscus caledoniae from the Pendleian stage of the Early Carboniferous shows heterodontous and durophagous teeth, representing the earliest known examples of significant adaptations in tetrapod dental morphology. Tetrapods of the Late Devonian and Early Carboniferous (Mississippian), now known in some depth, are generally conservative in their dentition and body morphologies. Their teeth are simple and uniform, being cone-like and sometimes recurved at the tip. Modifications such as keels occur for the first time in Early Carboniferous Tournaisian tetrapods. Acherontiscus, dated as from the Pendleian stage, is notable for being very small with a skull length of about 15 mm, having an elongate vertebral column and being limbless. Cladistic analysis places it close to the Early Carboniferous adelospondyls, aïstopods and colosteids and supports the hypothesis of 'lepospondyl' polyphyly. Heterodonty is associated with a varied diet in tetrapods, while durophagy suggests a diet that includes hard tissue such as chitin or shells. The mid-Carboniferous saw a significant increase in morphological innovation among tetrapods, with an expanded diversity of body forms, skull shapes and dentitions appearing for the first time.