Rheological and thermal degradation properties of hyperbranched polyisoprene prepared by anionic polymerization

New Strategy for Improvement of Interfacial Interactions between Poly(arylene sulfide sulfone) and Carbon Fiber by Grafting Polymeric Chains via Thiol-Ene Click Chemistry

A simple and efficient strategy for enhancing the interfacial interaction in carbon fiber-reinforced poly(arylene sulfide sulfone) (CF/PASS) composites by grafting polymeric chains via thiol-ene click chemistry is reported here. Simultaneously, three thiol compounds and carbon nanotubes were grafted on CFs to explore the reaction between the CF and thiol groups. X-ray photoelectron spectroscopy, Raman spectroscopy, and normalized temperature-dependent IR spectroscopy results confirm the successful grafting of three thiol compounds, carbon nanotubes, and polymer chains. Similarly, obvious changes on the CF surface can be seen before and after modification via scanning electron microscopy, such as grafted nanotubes and polymeric resin, and the increase in the modulus gradient and interfacial thickness of CF/PASS can be clearly seen via atomic force microscopy. All the results of micro and macro tests on mechanical properties indicate that connecting low molecular weight thiol-terminated PASS (HS-LPASS) onto CFs enhances the interfacial property and mechanical performance of CF/PASS to a greater extent. The interfacial shear strength, interlaminar shear strength, and tensile strength of CF@HS-LPASS-reinforced PASS (CF@HS-LPASS/PASS) increase significantly by 38.5, 43.6, and 24.4%, respectively. All the results demonstrate that thiol-ene click reactions can be used for CF modification; furthermore, in the presence of external stress, the grafted polymeric interphase can act as a "bridge layer" to improve the stress transfer efficiency.

Bio-elastomer nanocomposites reinforced with surface-modified graphene oxide prepared via in situ coordination polymerization

This article proposes a method to produce bio-elastomer nanocomposites, based on polyfarnesene or polymyrcene, reinforced with surface-modified graphene oxide (GO). The surface modification is performed by grafting alkylamines (octyl-, dodecyl-, and hexadecylamine) onto the surface of GO. The successful grafting was confirmed via spectroscopic (FTIR and Raman) and X-ray diffraction techniques. The estimated grafted amines appear to be around 30 wt%, as calculated via thermogravimetric analysis, increasing the inter-planar spacing among the nanosheets as a function of alkyl length in the amine. The resulting modified GOs were then used to prepare bio-elastomer nanocomposites via in situ coordination polymerization (using a ternary neodymium-based catalytic system), acting as reinforcing additives of polymyrcene and polyfarnesene. We demonstrated that the presence of the modified GO does not affect significantly the catalytic activity, nor the microstructure-control of the catalyst, which led to high cis-1,4 content bio-elastomers (>95%). Moreover, we show via rheometry that the presence of the modified-GO expands the capacity of the elastomer to store deformation or applied stress, as well as exhibit an activation energy an order of magnitude higher.

This article proposes a method to produce bio-elastomer nanocomposites, based on polyfarnesene or polymyrcene, reinforced with surface-modified graphene oxide (GO).