Porous collagen scaffold reinforced with surfaced activated PLLA nanoparticles

Ushering in the era of regenerative surgery

Tissue loss, irrespective of etiology, often requires extensive reconstruction. In many instances, the need exceeds what current treatments and technologies modern medicine can offer. Tissue engineering has made immense strides within the past few decades due to advances in biologics, biomaterials, and manufacturing. The convergence of these three domains has created limitless potential for future surgical care. Unfortunately, there still exists a disconnect on how to best implant these 'replacement parts' and care for the patient. It is therefore vital to develop paradigms for the integration of advanced surgical and tissue engineering technologies. This paper explores the convergence between tissue engineering and reconstructive surgery. We will describe the clinical problem of tissue loss, discuss currently available solutions, address limitations, and propose processes for integrating surgery and tissue engineering, thereby ushering in the era of regenerative surgery.

Electrospun electroconductive constructs of aligned fibers for cardiac tissue engineering

Myocardial infarction remains the leading cause of death in the western world. Since the heart has limited regenerative capabilities, several cardiac tissue engineering (CTE) strategies have been proposed to repair the damaged myocardium. A novel electrospun construct with aligned and electroconductive fibers combining gelatin, poly(lactic-co-glycolic) acid and polypyrrole that may serve as a cardiac patch is presented. Constructs were characterized for fiber alignment, surface wettability, shrinkage and swelling behavior, porosity, degradation rate, mechanical properties, and electrical properties. Cell-biomaterial interactions were studied using three different types of cells, Neonatal Rat Ventricular Myocytes (NRVM), human lung fibroblasts (MRC-5) and induced pluripotent stem cells (iPSCs). All cell types showed good viability and unique organization on construct surfaces depending on their phenotype. Finally, we assessed the maturation status of NRVMs after 14 days by confocal images and qRT-PCR. Overall evidence supports a proof-of-concept that this novel biomaterial construct could be a good candidate patch for CTE applications.

A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds

Tissue engineering (TE) and regenerative medicine integrate information and technology from various fields to restore/replace tissues and damaged organs for medical treatments. To achieve this, scaffolds act as delivery vectors or as cellular systems for drugs and cells; thereby, cellular material is able to colonize host cells sufficiently to meet up the requirements of regeneration and repair. This process is multi-stage and requires the development of various components to create the desired neo-tissue or organ. In several current TE strategies, biomaterials are essential components. While several polymers are established for their use as biomaterials, careful consideration of the cellular environment and interactions needed is required in selecting a polymer for a given application. Depending on this, scaffold materials can be of natural or synthetic origin, degradable or nondegradable. In this review, an overview of various natural and synthetic polymers and their possible composite scaffolds with their physicochemical properties including biocompatibility, biodegradability, morphology, mechanical strength, pore size, and porosity are discussed. The scaffolds fabrication techniques and a few commercially available biopolymers are also tabulated.

Random fiber networks with inclusions: The mechanism of reinforcement

The mechanical behavior of athermal random fiber networks embedding particulate inclusions is studied in this work. Composites in which the filler size is comparable with the mean segment length of the network are considered. Inclusions are randomly distributed in the network at various volume fractions, and cases in which fibers are rigidly bonded to fillers and in which no such bonding is imposed are studied separately. In the presence of inclusions, the small strain modulus increases, while the ability of the network to strain stiffen decreases relative to the unfilled network case. The reinforcement induced by fillers is most pronounced in sparse networks of floppier filaments that deform in the bending-dominated mode in the unfilled state. As the unfilled network density or the bending stiffness of fibers increases, the effect of filling diminishes rapidly. Fillers lead to a transition from the soft, bending-dominated, to the stiffer, stretching-dominated, deformation mode of the network, a transition which is primarily responsible for the observed overall reinforcement. The confinement, i.e., the restriction on network kinematics imposed by fillers, causes this transition. These results provide a justification for the observed difference in reinforcement obtained in sparsely versus densely cross-linked networks at a given filling fraction and provide guidance for the further development of network-based materials.

Assessment of the Influence of Acetic Acid Residue on Type I Collagen during Isolation and Characterization

Various methods for isolation of type I collagen using acids, bases, enzymes, and their combinations have been applied. However, a lack of standardization exists among type I collagens isolated by various approaches. Consequently, in this study, we assessed the influence of acetic acid residue on type I collagen isolated by pepsin-acetic acid treatment, the fabrication of collagen-based porous scaffolds, and the seeded cells on collagen scaffolds. Unlike the isolated collagen dialyzed by deionized water (DDW), collagen dialyzed by 0.5 M acetic acid (DAC) exhibited structural and thermal denaturation. Both DDW- and DAC-based porous scaffolds at all collagen concentrations (0.5, 1 and 2% w/v) showed the high degree of porosity (>98%), and their pore morphologies were comparable at the same concentrations. However, the DDW- and DAC-based collagen scaffolds displayed significant differences in their physical properties (weight, thickness, and volume) and swelling behaviors. In particular, the weight losses induced by mechanical stimulation reflected the high degradation of DAC-collagen scaffolds. In cell culture experiments using adipose-derived stem cells (ADSCs), the characteristics of mesenchymal stem cell (MSC) did not change in both DDW- and DAC-collagen scaffolds for 10 days, although cells proliferated less in the DAC-collagen scaffolds. Our results suggest that the elimination of acetic acid residue from isolated collagen is recommended to produce collagen scaffolds that provide a stable environment for cells and cell therapy-related applications.

Autologous liquid platelet rich fibrin: A novel drug delivery system

There is currently widespread interest within the biomaterial field to locally deliver biomolecules for bone and cartilage regeneration. Substantial work to date has focused on the potential role of these biomolecules during the healing process, and the carrier system utilized is a key factor in their effectiveness. Platelet rich fibrin (PRF) is a naturally derived fibrin scaffold that is easily obtained from peripheral blood following centrifugation. Slower centrifugation speeds have led to the commercialization of a liquid formulation (liquid-PRF) resulting in an upper plasma layer composed of liquid fibrinogen/thrombin prior to clot formation that remains in its liquid phase for approximately 15 min until injected into bodily tissues. Herein, we introduce the use of liquid PRF as an advanced local delivery system for small and large biomolecules. Potential target molecules including large (growth factors/cytokines and morphogenetic/angiogenic factors), as well as small (antibiotics, peptides, gene therapy and anti-osteoporotic) molecules are considered potential candidates for enhanced bone/cartilage tissue regeneration. Furthermore, liquid-PRF is introduced as a potential carrier system for various cell types and nano-sized particles that are capable of limiting/by-passing the immune system and minimizing potential foreign body reactions within host tissues following injection.

STATEMENT OF SIGNIFICANCE

There is currently widespread interest within the biomaterial field to locally deliver biomolecules for bone and cartilage regeneration. This review article focuses on the use of a liquid version of platelet rich fibrin (PRF) composed of liquid fibrinogen/thrombin as a drug delivery system. Herein, we introduce the use of liquid PRF as an advanced local delivery system for small and large biomolecules including growth factors, cytokines and morphogenetic/angiogenic factors, as well as antibiotics, peptides, gene therapy and anti-osteoporotic molecules as potential candidates for enhanced bone/cartilage tissue regeneration.

Carbodiimide cross-linking counteracts the detrimental effects of gamma irradiation on the physical properties of collagen-hyaluronan sponges

Collagen-based scaffolds are extensively used in biomaterials and tissue engineering applications. These scaffolds have shown great biocompatibility and versatility, but their relatively low mechanical properties may limit use in orthopaedic load-bearing applications. Moreover, terminal sterilization with gamma irradiation, as is commonly performed with commercial devices, presents concerns over structural integrity and enzymatic stability. Therefore, the goal of this study was to test the hypothesis that EDC/NHS cross-linking (10 mM/5 mM) can protect collagen-hyaluronan sponges from the damaging effects of gamma irradiation. Specifically, we evaluated compressive and tensile mechanical properties, enzymatic stability, porosity and pore size, and swelling ratio. Ultimate tensile strength and elastic modulus exhibited increases (168.5 and 245.8%, respectively) following irradiation, and exhibited over tenfold increases (1049.2 and 1270.6%, respectively) following cross-linking. Irradiation affected pore size (38.4% decrease), but cross-linking prior to irradiation resulted in only a 17.8% decrease. Cross-linking also showed an offsetting effect on the equilibrium modulus, enzymatic stability, and swelling ratio of sponges. These results suggest that carbodiimide cross-linking of collagen-hyaluronan sponges can mitigate the structural damage typically experienced during gamma irradiation, warranting their use in tissue engineering applications.

In vitro evaluation of a bone morphogenetic protein‑2 nanometer hydroxyapatite collagen scaffold for bone regeneration

Scaffold fabrication and biocompatibility are crucial for successful bone tissue engineering. Nanometer hydroxyapatite (nHAP) combined with collagen (COL) is frequently utilized as a suitable osseous scaffold material. Furthermore, growth factors, including bone morphogenetic protein‑2 (BMP‑2), are used to enhance the scaffold properties. The present study used blending and freeze‑drying methods to develop a BMP‑2‑nHAP‑COL scaffold. An ELISA was performed to determine the BMP‑2 release rate from the scaffold. Flow cytometry was used to identify rat bone marrow‑derived mesenchymal stem cells (BMSCs) prior to their combination with the scaffold. Scanning electron microscopy was used to observe the scaffold structure and BMSC morphology following seeding onto the scaffold. BMSCs were also used to assess the biological compatibility of the scaffold in vitro. BMP‑2‑nHAP‑COL and nHAP‑COL scaffolds were assessed alongside the appropriate control groups. Cells were counted to determine early cell adhesion. Cell Counting kit‑8 and alkaline phosphatase assays were used to detect cell proliferation and differentiation, respectively. Gross morphology confirmed that the BMP‑2‑nHAP‑COL scaffold microstructure conformed to the optimal characteristics of a bone tissue engineering scaffold. Furthermore, the BMP‑2‑nHAP‑COL scaffold exhibited no biological toxicity and was demonstrated to promote BMSC adhesion, proliferation and differentiation. The BMP‑2‑nHAP‑COL scaffold had good biocompatibility in vitro, and may therefore be modified further to construct an optimized scaffold for future bone tissue engineering.

Regenerative Engineering for Knee Osteoarthritis Treatment: Biomaterials and Cell-Based Technologies

Knee osteoarthritis (OA) is the most common form of arthritis worldwide. The incidence of this disease is rising and its treatment poses an economic burden. Two early targets of knee OA treatment include the predominant symptom of pain, and cartilage damage in the knee joint. Current treatments have been beneficial in treating the disease but none is as effective as total knee arthroplasty (TKA). However, while TKA is an end-stage solution of the disease, it is an invasive and expensive procedure. Therefore, innovative regenerative engineering strategies should be established as these could defer or annul the need for a TKA. Several biomaterial and cell-based therapies are currently in development and have shown early promise in both preclinical and clinical studies. The use of advanced biomaterials and stem cells independently or in conjunction to treat knee OA could potentially reduce pain and regenerate focal articular cartilage damage. In this review, we discuss the pathogenesis of pain and cartilage damage in knee OA and explore novel treatment options currently being studied, along with some of their limitations.

ADSCs on PLLA/PCL Hybrid Nanoscaffold and Gelatin Modification: Cytocompatibility and Mechanical Properties

BACKGROUND

Development of tissue engineering and regenerative medicine has led to designing scaffolds and their modification to provide a better microenvironment which mimics the natural niche of the cells. Gelatin surface modification was applied to improve scaffold flexibility and cytocompatibility.

METHODS

PLLA/PCL aligned fibrous scaffold was fabricated using electrospinning method. ADSCs were seeded after O2 plasma treatment and gelatin coating of the scaffolds. The morphological and mechanical properties of blends were assessed by Scanning Electron Microscopy (SEM), tensile test and ATR-FTIR. The cells proliferation was evaluated by MTT assay.

RESULTS

Based on the results, it is supposed that gelatin coating is a brilliant method of surface modification which significantly increases the mechanical properties of scaffold without any changes on the construction or on the direction of nanofibers which conducts cell's elongation. MTT analysis exhibited that ADSCs attachment, viability and proliferation significantly (p < 0.05) increased after gelatin treatment.

CONCLUSION

Gelatin surface modification is a highly beneficial method to improve cytocompatibility, flexibility and mechanical features of the scaffolds which doesn't affect the nanofibers construction. Proliferation of Adipose Derived Stem Cells (ADSCs) as a remarkable source of stem cells was investigated for the first time on PLLA/PCL hybrid scaffold.