Proposed use of a scanning-tunneling-microscope tunnel junction for the measurement of a tunneling time

Nanoscale Devices for Rectification of High Frequency Radiation from the Infrared through the Visible: A New Approach

We present a new and viable method for optical rectification. This approach has been demonstrated both theoretically and experimentally and is the basis fot the development of devices to rectify radiation through the visible. This technique for rectification is based not on conventional material or temperature asymmetry as used in MIM (metal/insulator/metal) or Schottky diodes, but on a purely sharp geometric property of the antenna. This sharp “tip” or edge with a collector anode constitutes a tunnel junction. In these devices the rectenna (consisting of the antenna and the tunnel junction) acts as the absorber of the incident radiation and the rectifier. Using current nanofabrication techniques and the selective atomic layer deposition (ALD) process, junctions of 1 nm can be fabricated, which allow for rectification of frequencies up to the blue portion of the spectrum. To assess the viability of our approach, we review the development of nanoantenna structures and tunnel junctions capable of operating in the visible region. In addition, we review the detailed process of rectification and present methodologies for analysis of diode data. Finally, we present operational designs for an optical rectenna and its fabrication and discuss outstanding problems and future work.

Optical rectification and field enhancement in a plasmonic nanogap

Metal nanostructures act as powerful optical antennas because collective modes of the electron fluid in the metal are excited when light strikes the surface of the nanostructure. These excitations, known as plasmons, can have evanescent electromagnetic fields that are orders of magnitude larger than the incident electromagnetic field. The largest field enhancements often occur in nanogaps between plasmonically active nanostructures, but it is extremely challenging to measure the fields in such gaps directly. These enhanced fields have applications in surface-enhanced spectroscopies, nonlinear optics and nanophotonics. Here we show that nonlinear tunnelling conduction between gold electrodes separated by a subnanometre gap leads to optical rectification, producing a d.c. photocurrent when the gap is illuminated. Comparing this photocurrent with low-frequency conduction measurements, we determine the optical frequency voltage across the tunnelling region of the nanogap, and also the enhancement of the electric field in the tunnelling region, as a function of gap size. The measured field enhancements exceed 1,000, consistent with estimates from surface-enhanced Raman measurements. Our results highlight the need for more realistic theoretical approaches that are able to model the electromagnetic response of metal nanostructures on scales ranging from the free-space wavelength, λ, down to ∼λ/1,000, and for experiments with new materials, different wavelengths and different incident polarizations.

Electronic and optical properties of electromigrated molecular junctions

Electromigrated nanoscale junctions have proven very useful for studying electronic transport at the single-molecule scale. However, confirming that conduction is through precisely the molecule of interest and not some contaminant or metal nanoparticle has remained a persistent challenge, typically requiring a statistical analysis of many devices. We review how transport mechanisms in both electronic and optical measurements can be used to infer information about the nanoscale junction configuration. The electronic response to optical excitation is particularly revealing. We briefly discuss surface-enhanced Raman spectroscopy on such junctions, and present new results showing that currents due to optical rectification can provide a means of estimating the local electric field at the junction due to illumination.

Atomic-scale rectification at microwave frequency

Microwave of known amplitude and frequency, irradiating the junction of a low temperature scanning tunneling microscope, was found to induce a dc signal. This rectification current is spatially localized and exhibits chemical sensitivity at the atomic scale. Dependence of the rectification current on the sample bias voltage reveals spin splitting in the electronic state of a single Mn atom and vibrations of single MnCO molecule. These results demonstrate the feasibility of atomic scale nonlinear spectroscopy and the potential for the detection of resonance phenomena excited with a spatially extended electromagnetic wave.

Picosecond Resolution in Scanning Tunneling Microscopy

A method has been developed for performing fast time-resolved experiments with a scanning tunneling microscope. The method uses the intrinsic nonlinearity in the microscope's current versus voltage characteristics to resolve optically generated transient signals on picosecond time scales. The ability to combine the spatial resolution of tunneling microscopy with the time resolution of ultrafast optics yields a powerful tool for the investigation of dynamic phenomena on the atomic scale.