Spin and orbital magnetism in Fe-Co and Co-Ni alloys

Determining the Proximity Effect-Induced Magnetic Moment in Graphene by Polarized Neutron Reflectivity and X-ray Magnetic Circular Dichroism

We report the magnitude of the induced magnetic moment in CVD-grown epitaxial and rotated-domain graphene in proximity with a ferromagnetic Ni film, using polarized neutron reflectivity (PNR) and X-ray magnetic circular dichroism (XMCD). The XMCD spectra at the C K-edge confirm the presence of a magnetic signal in the graphene layer, and the sum rules give a magnetic moment of up to ∼0.47 μ_B/C atom induced in the graphene layer. For a more precise estimation, we conducted PNR measurements. The PNR results indicate an induced magnetic moment of ∼0.41 μ_B/C atom at 10 K for epitaxial and rotated-domain graphene. Additional PNR measurements on graphene grown on a nonmagnetic Ni₉Mo₁ substrate, where no magnetic moment in graphene is measured, suggest that the origin of the induced magnetic moment is due to the opening of the graphene's Dirac cone as a result of the strong C p_z-Ni 3d hybridization.

Thermodynamics and Magnetism of SmFe12 Compound Doped with Co and Ni: An Ab Initio Study

Ni-doped Sm(Fe1−xCox)12 alloys are investigated for their magnetic properties. The Sm(Fe,Co)11M1 compound (M acts as a stabilizer) with the smallest (7.7 at.%) rare-earth-metal content has been recognized as a possible contender for highly efficient permanent magnets thanks to its significant anisotropy field and Curie temperature. The early transition metals (Ti-Mn) as well as Al, Si, and Ga stabilize the SmFe12 compound but significantly decrease its saturation magnetization. To keep the saturation magnetization in the range of 1.4–1.6 T, we suggest replacing a certain amount of Fe and Co in the Sm(Fe1−xCox)12 alloys with Ni. Ni plays the role of a thermodynamic stabilizer, and contrary to the above-listed elements, has the spin moment aligned parallel to the spin moment of the SmFe12 compound, thereby boosting its saturation magnetization without affecting the anisotropy field or Curie temperature.

Nature of the magnetic moment of cobalt in ordered FeCo alloy

The magnets are typically classified into Stoner and Heisenberg type, depending on the itinerant or localized nature of the constituent magnetic moments. In this work, we investigate theoretically the behaviour of the magnetic moments of iron and cobalt in their B2-ordered alloy. The results based on local spin density approximation for the density functional theory (DFT) suggest that the Co magnetic moment strongly depends on the directions of the surrounding magnetic moments, which usually indicates the Stoner-type mechanism of magnetism. This is consistent with the disordered local moment picture of the paramagnetic state, where the magnetic moment of cobalt gets substantially suppressed. We argue that this is due to the lack of strong on-site electron correlations, which we take into account by employing a combination of DFT and dynamical mean-field theory (DMFT). Within LDA + DMFT, we find a substantial quasiparticle mass renormalization and a non Fermi-liquid behaviour of Fe-3dorbitals. The resulting spectral functions are in very good agreement with measured spin-resolved photoemission spectra. Our results suggest that local correlations play an essential role in stabilizing a robust local moment on Co in the absence of magnetic order at high temperatures.

Graphene/Half-Metallic Heusler Alloy: A Novel Heterostructure toward High-Performance Graphene Spintronic Devices

Graphene-based vertical spin valves (SVs) are expected to offer a large magnetoresistance effect without impairing the electrical conductivity, which can pave the way for the next generation of high-speed and low-power-consumption storage and memory technologies. However, the graphene-based vertical SV has failed to prove its competence due to the lack of a graphene/ferromagnet heterostructure, which can provide highly efficient spin transport. Herein, the synthesis and spin-dependent electronic properties of a novel heterostructure consisting of single-layer graphene (SLG) and a half-metallic Co₂ Fe(Ge_0.5 Ga_0.5 ) (CFGG) Heusler alloy ferromagnet are reported. The growth of high-quality SLG with complete coverage by ultrahigh-vacuum chemical vapor deposition on a magnetron-sputtered single-crystalline CFGG thin film is demonstrated. The quasi-free-standing nature of SLG and robust magnetism of CFGG at the SLG/CFGG interface are revealed through depth-resolved X-ray magnetic circular dichroism spectroscopy. Density functional theory (DFT) calculation results indicate that the inherent electronic properties of SLG and CFGG such as the linear Dirac band and half-metallic band structure are preserved in the vicinity of the interface. These exciting findings suggest that the SLG/CFGG heterostructure possesses distinctive advantages over other reported graphene/ferromagnet heterostructures, for realizing effective transport of highly spin-polarized electrons in graphene-based vertical SV and other advanced spintronic devices.

L-edge sum rule analysis on 3d transition metal sites: from d10 to d0 and towards application to extremely dilute metallo-enzymes

According to L-edge sum rules, the number of 3d vacancies at a transition metal site is directly proportional to the integrated intensity of the L-edge X-ray absorption spectrum (XAS) for the corresponding metal complex. In this study, the numbers of 3d holes are characterized quantitatively or semi-quantitatively for a series of manganese (Mn) and nickel (Ni) complexes, including the electron configurations 3d10→ 3d0. In addition, extremely dilute (<0.1% wt/wt) Ni enzymes were examined by two different approaches: (1) by using a high resolution superconducting tunnel junction X-ray detector to obtain XAS spectra with a very high signal-to-noise ratio, especially in the non-variant edge jump region; and (2) by adding an inert tracer to the sample that provides a prominent spectral feature to replace the weak edge jump for intensity normalization. In this publication, we present for the first time: (1) L-edge sum rule analysis for a series of Mn and Ni complexes that include electron configurations from an open shell 3d0 to a closed shell 3d10; (2) a systematic analysis on the uncertainties, especially on that from the edge jump, which was missing in all previous reports; (3) a clearly-resolved edge jump between pre-L3 and post-L2 regions from an extremely dilute sample; (4) an evaluation of an alternative normalization standard for L-edge sum rule analysis. XAS from two copper (Cu) proteins measured using a conventional semiconductor X-ray detector are also repeated as bridges between Ni complexes and dilute Ni enzymes. The differences between measuring 1% Cu enzymes and measuring <0.1% Ni enzymes are compared and discussed. This study extends L-edge sum rule analysis to virtually any 3d metal complex and any dilute biological samples that contain 3d metals.

Spin/orbital and magnetic quantum number selective magnetization measurements for CoFeB/MgO multilayer films

Spin selective magnetic hysteresis (SSMH) curves, orbital selective magnetic hysteresis (OSMH) curves and magnetic quantum number selective SSMH curves are obtained for CoFeB/MgO multilayer films by combining magnetic Compton profile measurements and superconducting quantum interference device (SQUID) magnetometer measurements. Although the SQUID magnetometer measurements do not show perpendicular magnetic anisotropy (PMA) in the CoFeB/MgO multilayer film, PMA behavior is observed in the OSMH and SSMH curves for the |m|  =  2 magnetic quantum number states. These facts indicate that magnetization switching behavior is dominated by the orbital magnetization of the |m|  =  2 magnetic quantum number states.

Enhanced orbital magnetic moments in magnetic heterostructures with interface perpendicular magnetic anisotropy

We have studied the magnetic layer thickness dependence of the orbital magnetic moment in magnetic heterostructures to identify contributions from interfaces. Three different heterostructures, Ta/CoFeB/MgO, Pt/Co/AlO_x and Pt/Co/Pt, which possess significant interface contribution to the perpendicular magnetic anisotropy, are studied as model systems. X-ray magnetic circular dichroism spectroscopy is used to evaluate the relative orbital moment, i.e. the ratio of the orbital to spin moments, of the magnetic elements constituting the heterostructures. We find that the relative orbital moment of Co in Pt/Co/Pt remains constant against its thickness whereas the moment increases with decreasing Co layer thickness for Pt/Co/AlO_x, suggesting that a non-zero interface orbital moment exists for the latter system. For Ta/CoFeB/MgO, a non-zero interface orbital moment is found only for Fe. X-ray absorption spectra shows that a particular oxidized Co state in Pt/Co/AlO_x, absent in other heterosturctures, may give rise to the interface orbital moment in this system. These results show element specific contributions to the interface orbital magnetic moments in ultrathin magnetic heterostructures.

Nickel L-edge and K-edge X-ray absorption spectroscopy of non-innocent Ni[S₂C₂(CF₃)₂]₂(n) series (n = -2, -1, 0): direct probe of nickel fractional oxidation state changes

A series of nickel dithiolene complexes Ni[S2C2(CF3)2]2(n) (n = -2, -1, 0) has been investigated using Ni L- and K-edge X-ray absorption spectroscopy (XAS). The L3 centroid shifts about 0.3 eV for a change of one unit in the formal oxidation state (or 0.3 eV per oxi), corresponding to ~33% of the shift for Ni oxides or fluorides (about 0.9 eV per oxi). The K-edge XAS edge position shifts about 0.7 eV per oxi, corresponding to ~38% of that for Ni oxides (1.85 eV per oxi). In addition, Ni L sum rule analysis found the Ni(3d) ionicity in the frontier orbitals being 50.5%, 44.0% and 38.5% respectively (for n = -2, -1, 0), in comparison with their formal oxidation states (of Ni(II), Ni(III), and Ni(IV)). For the first time, direct and quantitative measurement of the Ni fractional oxidation state changes becomes possible for Ni dithiolene complexes, illustrating the power of L-edge XAS and L sum rule analysis in such a study. The Ni L-edge and K-edge XAS can be used in a complementary manner to better assess the oxidation states for Ni.

Magnetic properties of Fe(x)Co(1-x) nanochains on Pt(1 1 1) surfaces

The magnetic properties of FexCo1-x nanochains on Pt(1 1 1) were studied using the first-principles real-space linear muffin-tin orbital-atomic sphere approximation (RS-LMTO-ASA) method within the density functional theory. The relative amounts of Fe and Co atoms in a chosen nanochain were varied and several possible arrangements of the atomic species were taken into account. The results of the exchange interaction demonstrates ferromagnetic coupling for the nanowires. Our calculations of Fe and Co average magnetic moments reveal a large enhancement of both spin and orbital moments compared to Fe-Co films deposited on a Pt(1 1 1) surface. The trend for the orbital moments with respect to stoichiometry differs from all previous higher-dimensional Fe-Co alloys on Pt(1 1 1) studies.

Correlation between magnetism and spin-dependent transport in CoFeB alloys

We report a correlation between the spin polarization of the tunneling electrons and the magnetic moment of amorphous CoFeB alloys. Such a correlation is surprising since the spin polarization of the tunneling electrons involves s-like electrons close to the Fermi level (E_{F}), while the magnetic moment mainly arises due to all the d electrons below E_{F}. We show that probing the s and d bands individually provides clear and crucial evidence for such a correlation to exist through s-d hybridization, and demonstrate the tunability of the electronic and magnetic properties of CoFeB alloys.

Magnetic and structural properties of FeCr alloys

Synergistic synchrotron x-ray absorption experiments using imaging magnetic microspectroscopy, x-ray magnetic circular dichroism, and ab initio calculations on FeCr alloys reveal that the Cr content strongly influences the ferromagnetic microstructure and the Fe magnetic moments. The Cr local structure resolved by extended x-ray absorption fine structure (EXAFS) is also found to be affected by the alloy's composition. Both EXAFS and ab initio calculations show a change in the Cr local atomic structure above 10 at.% Cr content from the distance contraction of the first two coordination shells around the Cr absorbing atom. These results indicate the strong dependence of magnetic and structural properties of these alloys on Cr concentration.

Local magnetic effects of interface alloying in Fe/Co superlattices

Effects of interface alloying and the thickness dependence of magnetic properties of Fe/Co(001) multilayers have been investigated. The thicknesses of the Fe layers have been varied between two and 14 monolayers while the Co layers have been held constant at 7 ML. From conversion electron Mössbauer spectroscopy (CEMS) measurements and electronic structure calculations it is found that the magnitude of the Fe magnetic hyperfine field is larger close to the interface and smaller in the middle of thick (≥9 ML) Fe layers. For a thinner Fe layer (≤5 ML) the largest field is found in the centre of the Fe layer. By modelling the effects of interface alloying from earlier data for bulk Fe-Co alloys, and comparing with the experimental results, the degree of interface alloying is estimated to be 2-3 ML at each interface.

Size-dependent magnetism of deposited small iron clusters studied by x-ray magnetic circular dichroism

The size-dependent magnetic properties of small iron clusters deposited on ultrathin nickel films have been studied with circularly polarized synchrotron radiation. With the use of sum rules, orbital and spin magnetic moments have been extracted from x-ray magnetic circular dichroism spectra. The ratio of orbital to spin magnetic moments varies considerably with cluster size, reflecting the dependence of magnetic properties on cluster size and geometry. These variations can be explained in terms of enhanced orbital moments in small clusters.