Lattice-Boltzmann-Langevin simulations of binary mixtures

Dynamics of spreading of an asymmetrically placed droplet near a fluid-fluid interface

Two-dimensional numerical simulations are carried out to study the spreading dynamics of a droplet placed in the vicinity of a fluid-fluid interface. Simulations are performed using the hybrid lattice-Boltzmann technique and the diffuse-interface model by considering three immiscible fluids of the same density and viscosity. In contrast to the well-studied spreading of drops placed symmetrically across fluid-fluid interfaces, this work considers the simultaneous migration, spreading and eventual adsorption of an asymmetrically placed drop. These processes, which are solely driven by interfacial forces, are characterised by monitoring the temporal evolution of geometric parameters, such as the centre of mass, radius and height of the drop, the surface energy of the three interfaces and the associated flow fields inside and outside the droplet. The rate of spreading and rate of adsorption are also calculated to determine the dominant processes that drive the dynamics of the system.

Fluctuation-induced dynamics of nematic topological defects

Topological defects are increasingly being identified in various biological systems, where their characteristic flow fields and stress patterns are associated with continuous active stress generation by biological entities. Here, using numerical simulations of continuum fluctuating nematohydrodynamics, we show that even in the absence of any specific form of active stresses associated with self-propulsion, mesoscopic fluctuations in either orientational alignment or hydrodynamics can independently result in flow patterns around topological defects that resemble the ones observed in active systems. Our simulations further show the possibility of extensile- and contractile-like motion of fluctuation-induced positive half-integer topological defects. Remarkably, isotropic stress fields also reproduce the experimentally measured stress patterns around topological defects in epithelia. Our findings further reveal that extensile- or contractile-like flow and stress patterns around fluctuation-induced defects are governed by passive elastic stresses and flow-aligning behavior of the nematics.

Large Fluctuations in Nonideal Coarse-Grained Systems

Using the recently introduced molecular dynamics lattice gas approach, we test fluctuations of coarse-grained quantities. We show that as soon as the system can no longer be considered an ideal gas fluctuations fail to diminish upon coarse graining as is usually expected. These results suggest that current approaches to simulating fluctuating hydrodynamics may have to be augmented to achieve quantitative results for systems with a nonideal equation of state. The molecular dynamics lattice gas method gives a guidance to the exact nature of the fluctuation in such systems.

Discrete unified gas kinetic scheme for nonlinear convection-diffusion equations

In this paper, we develop a discrete unified gas kinetic scheme (DUGKS) for a general nonlinear convection-diffusion equation (NCDE) and show that the NCDE can be recovered correctly from the present model through the Chapman-Enskog analysis. We then test the present DUGKS through some classic convection-diffusion equations, and we find that the numerical results are in good agreement with analytical solutions and that the DUGKS model has a second-order convergence rate. Finally, as a finite-volume method, the DUGKS can also adopt the nonuniform mesh. Besides, we perform some comparisons among the DUGKS, the finite-volume lattice Boltzmann model (FV-LBM), the single-relaxation-time lattice Boltzmann model (SLBM), and the multiple-relaxation-time lattice Boltzmann model (MRT-LBM). The results show that the present DUGKS is more accurate than the FV-LBM, more stable than the SLBM, and almost has the same accuracy as the MRT-LBM. Moreover, the use of nonuniform mesh may make the DUGKS model more flexible.

Effects of thermal fluctuations in the fragmentation of a nanoligament

We study the effects of thermally induced capillary waves in the fragmentation of a liquid ligament into multiple nanodroplets. Our numerical implementation is based on a fluctuating lattice Boltzmann (LB) model for nonideal multicomponent fluids, including nonequilibrium stochastic fluxes mimicking the effects of molecular forces at the nanoscales. We quantitatively analyze the statistical distribution of the breakup times and the droplet volumes after the fragmentation process at changing the two relevant length scales of the problem, i.e., the thermal length scale and the ligament size. The robustness of the observed findings is also corroborated by quantitative comparisons with the predictions of sharp interface hydrodynamics. Beyond the practical importance of our findings for nanofluidic engineering devices, our study also explores a novel application of LB in the realm of nanofluidic phenomena.

Stochastic simulation of reaction-diffusion systems: A fluctuating-hydrodynamics approach

We develop numerical methods for stochastic reaction-diffusion systems based on approaches used for fluctuatinghydrodynamics (FHD). For hydrodynamicsystems, the FHD formulation is formally described by stochastic partial differential equations (SPDEs). In the reaction-diffusion systems we consider, our model becomes similar to the reaction-diffusion master equation (RDME) description when our SPDEs are spatially discretized and reactions are modeled as a source term having Poissonfluctuations. However, unlike the RDME, which becomes prohibitively expensive for an increasing number of molecules, our FHD-based description naturally extends from the regime where fluctuations are strong, i.e., each mesoscopic cell has few (reactive) molecules, to regimes with moderate or weak fluctuations, and ultimately to the deterministic limit. By treating diffusion implicitly, we avoid the severe restriction on time step size that limits all methods based on explicit treatments of diffusion and construct numerical methods that are more efficient than RDME methods, without compromising accuracy. Guided by an analysis of the accuracy of the distribution of steady-state fluctuations for the linearized reaction-diffusion model, we construct several two-stage (predictor-corrector) schemes, where diffusion is treated using a stochastic Crank-Nicolson method, and reactions are handled by the stochastic simulation algorithm of Gillespie or a weakly second-order tau leaping method. We find that an implicit midpoint tau leaping scheme attains second-order weak accuracy in the linearized setting and gives an accurate and stable structure factor for a time step size of an order of magnitude larger than the hopping time scale of diffusing molecules. We study the numerical accuracy of our methods for the Schlögl reaction-diffusion model both in and out of thermodynamic equilibrium. We demonstrate and quantify the importance of thermodynamicfluctuations to the formation of a two-dimensional Turing-like pattern and examine the effect of fluctuations on three-dimensional chemical front propagation. By comparing stochastic simulations to deterministic reaction-diffusion simulations, we show that fluctuations accelerate pattern formation in spatially homogeneous systems and lead to a qualitatively different disordered pattern behind a traveling wave.

Integer lattice gas with Monte Carlo collision operator recovers the lattice Boltzmann method with Poisson-distributed fluctuations

We examine a new kind of lattice gas that closely resembles modern lattice Boltzmann methods. This new kind of lattice gas, which we call a Monte Carlo lattice gas, has interesting properties that shed light on the origin of the multirelaxation time collision operator, and it derives the equilibrium distribution for an entropic lattice Boltzmann. Furthermore these lattice gas methods have Galilean invariant fluctuations given by a Poisson statistics, giving further insight into the properties that we should expect for fluctuating lattice Boltzmann methods.

Flow of colloidal suspensions through small orifices

In this work, we numerically study a dense colloidal suspension flowing through a small outlet driven by a pressure drop using lattice-Boltzmann methods. This system shows intermittent flow regimes that precede clogging events. Several pieces of evidence suggest that the temperature controls the dynamic state of the system when the driving force and the aperture size are fixed. When the temperature is low, the suspension's flow can be interrupted during long time periods, which can be even two orders of magnitude larger than the system's characteristic time (Stokes). We also find that strong thermal noise does not allow the formation of stable aggregate structures avoiding extreme clogging events, but, at the same time, it randomizes the particle trajectories and disturbs the advective particle flow through the aperture. Moreover, examining the particle velocity statistics, we obtain that in the plane normal to the pressure drop the colloids always move as free particles regardless of the temperature value. In the pressure drop direction, at high temperature the colloids experience a simple balance between advective and diffusive transport, but at low temperature the nature of the flow is much more complex, correlating with the occurrence of very long clogging events.

Lattice Boltzmann accelerated direct simulation Monte Carlo for dilute gas flow simulations

Hybrid particle-continuum computational frameworks permit the simulation of gas flows by locally adjusting the resolution to the degree of non-equilibrium displayed by the flow in different regions of space and time. In this work, we present a new scheme that couples the direct simulation Monte Carlo (DSMC) with the lattice Boltzmann (LB) method in the limit of isothermal flows. The former handles strong non-equilibrium effects, as they typically occur in the vicinity of solid boundaries, whereas the latter is in charge of the bulk flow, where non-equilibrium can be dealt with perturbatively, i.e. according to Navier-Stokes hydrodynamics. The proposed concurrent multiscale method is applied to the dilute gas Couette flow, showing major computational gains when compared with the full DSMC scenarios. In addition, it is shown that the coupling with LB in the bulk flow can speed up the DSMC treatment of the Knudsen layer with respect to the full DSMC case. In other words, LB acts as a DSMC accelerator.This article is part of the themed issue 'Multiscale modelling at the physics-chemistry-biology interface'.

Fluctuating lattice Boltzmann method for the diffusion equation

We derive a fluctuating lattice Boltzmann method for the diffusion equation. The derivation removes several shortcomings of previous derivations for fluctuating lattice Boltzmann methods for hydrodynamic systems. The comparative simplicity of this diffusive system highlights the basic features of this first exact derivation of a fluctuating lattice Boltzmann method.

Universal evolution of a viscous-capillary spreading drop

The rate of spreading or retraction of a drop on a flat substrate is determined through a balance of surface tension and hydrodynamic flow. While asymptotic regimes are known, no general rate equation has hitherto been available. Here, we revisit this classic problem, in a regime governed by capillary and viscous forces, by performing an exhaustive numerical study of drop evolution as a function of the contact angle with the substrate. Our study reveals a universal evolution of the drop radius parameterised only by the substrate wettability. Two limits of this evolution recover the familiar exponential and algebraic regimes. Our results show quantitative comparison with the evolution derived from lubrication theory, indicating that dissipation at the contact line is the key determinant in drop evolution. Our work, both numerical and theoretical, provides a foundation for studying the full temporal dynamics of droplet evolution under the influence of external fields and thermal fluctuations, which are of importance in nanofluidics.

Fluctuating multicomponent lattice Boltzmann model

Current implementations of fluctuating lattice Boltzmann equations (FLBEs) describe single component fluids. In this paper, a model based on the continuum kinetic Boltzmann equation for describing multicomponent fluids is extended to incorporate the effects of thermal fluctuations. The thus obtained fluctuating Boltzmann equation is first linearized to apply the theory of linear fluctuations, and expressions for the noise covariances are determined by invoking the fluctuation-dissipation theorem directly at the kinetic level. Crucial for our analysis is the projection of the Boltzmann equation onto the orthonormal Hermite basis. By integrating in space and time the fluctuating Boltzmann equation with a discrete number of velocities, the FLBE is obtained for both ideal and nonideal multicomponent fluids. Numerical simulations are specialized to the case where mean-field interactions are introduced on the lattice, indicating a proper thermalization of the system.

Morphological evolution of domains in spinodal decomposition

Domain growth in spinodal decomposition is usually described by a single time-evolving length scale. We show that the evolution of morphology of domains is nonmonotonic. The domains elongate rapidly at first and then, with the help of hydrodynamics, return to a more circular shape. The initial elongation phase does not alter with hydrodynamics. A small deviation from critical composition changes the morphology dramatically.

Clogging transition of many-particle systems flowing through bottlenecks

When a large set of discrete bodies passes through a bottleneck, the flow may become intermittent due to the development of clogs that obstruct the constriction. Clogging is observed, for instance, in colloidal suspensions, granular materials and crowd swarming, where consequences may be dramatic. Despite its ubiquity, a general framework embracing research in such a wide variety of scenarios is still lacking. We show that in systems of very different nature and scale -including sheep herds, pedestrian crowds, assemblies of grains, and colloids- the probability distribution of time lapses between the passages of consecutive bodies exhibits a power-law tail with an exponent that depends on the system condition. Consequently, we identify the transition to clogging in terms of the divergence of the average time lapse. Such a unified description allows us to put forward a qualitative clogging state diagram whose most conspicuous feature is the presence of a length scale qualitatively related to the presence of a finite size orifice. This approach helps to understand paradoxical phenomena, such as the faster-is-slower effect predicted for pedestrians evacuating a room and might become a starting point for researchers working in a wide variety of situations where clogging represents a hindrance.

Modeling multiphase flow using fluctuating hydrodynamics

Fluctuating hydrodynamics provides a model for fluids at mesoscopic scales where thermal fluctuations can have a significant impact on the behavior of the system. Here we investigate a model for fluctuating hydrodynamics of a single-component, multiphase flow in the neighborhood of the critical point. The system is modeled using a compressible flow formulation with a van der Waals equation of state, incorporating a Korteweg stress term to treat interfacial tension. We present a numerical algorithm for modeling this system based on an extension of algorithms developed for fluctuating hydrodynamics for ideal fluids. The scheme is validated by comparison of measured structure factors and capillary wave spectra with equilibrium theory. We also present several nonequilibrium examples to illustrate the capability of the algorithm to model multiphase fluid phenomena in a neighborhood of the critical point. These examples include a study of the impact of fluctuations on the spinodal decomposition following a rapid quench, as well as the piston effect in a cavity with supercooled walls. The conclusion in both cases is that thermal fluctuations affect the size and growth of the domains in off-critical quenches.

Do liquid drops roll or slide on inclined surfaces?

We study the motion of a two-dimensional droplet on an inclined surface, under the action of gravity, using a diffuse interface model which allows for arbitrary equilibrium contact angles. The kinematics of motion is analyzed by decomposing the gradient of the velocity inside the droplet into a shear and a residual flow. This decomposition helps in distinguishing sliding versus rolling motion of the drop. Our detailed study confirms intuition, in that rolling motion dominates as the droplet shape approaches a circle, and the viscosity contrast between the droplet and the ambient fluid becomes large. As a consequence of kinematics, the amount of rotation in a general droplet shape follows a universal curve characterized by geometry, and independent of Bond number, surface inclination and equilibrium contact angle, but determined by the slip length and viscosity contrast. Our results open the way toward a rational design of droplet-surface properties, both when rolling motion is desirable (as in self-cleaning hydrophobic droplets) and when it must be prevented (as in insecticide sprays on leaves).

Simulation of static critical phenomena in nonideal fluids with the lattice Boltzmann method

A fluctuating nonideal fluid at its critical point is simulated with the lattice Boltzmann method. It is demonstrated that the method, employing a Ginzburg-Landau free energy functional, correctly reproduces the static critical behavior associated with the Ising universality class. A finite-size scaling analysis is applied to determine the critical exponents related to the order parameter, compressibility and specific heat. A particular focus is put on finite-size effects and issues related to the global conservation of the order parameter.