Heat devices in nonlinear irreversible thermodynamics

Maximum efficiency of low-dissipation heat pumps at given heating load

We derive an analytical expression for maximum efficiency at fixed power of heat pumps operating along a finite-time reverse Carnot cycle under the low-dissipation assumption. The result is cumbersome, but it implies simple formulas for tight upper and lower bounds on the maximum efficiency and various analytically tractable approximations. In general, our results qualitatively agree with those obtained earlier for endoreversible heat pumps. In fact, we identify a special parameter regime when the performance of the low-dissipation and endoreversible devices is the same. At maximum power, heat pumps operate as work to heat converters with efficiency 1. Expressions for maximum efficiency at given power can be helpful in the identification of more practical operation regimes.

Maximum efficiency of absorption refrigerators at arbitrary cooling power

We consider absorption refrigerators consisting of simultaneously operating Carnot-type heat engine and refrigerator. Their maximum efficiency at given power (MEGP) is given by the product of MEGPs for the internal engine and refrigerator. The only subtlety of the derivation lies in the fact that the maximum cooling power of the absorption refrigerator is not limited just by the maximum power of the internal refrigerator, but, due to the first law, also by that of the internal engine. As a specific example, we consider the simultaneous absorption refrigerators composed of low-dissipation (LD) heat engines and refrigerators, for which the expressions for MEGPs are known. The derived expression for maximum efficiency implies bounds on the MEGP of LD absorption refrigerators. It also implies that a slight decrease in power of the absorption refrigerator from its maximum value results in a large nonlinear increase in efficiency, observed in heat engines, whenever the ratio of maximum powers of the internal engine and the refrigerator does not diverge. Otherwise, the increase in efficiency is linear as observed in LD refrigerators. Thus, in all practical situations, the efficiency of LD absorption refrigerators significantly increases when their cooling power is slightly decreased from its maximum.

Comparative Assessment of Various Low-Dissipation Combined Models for Three-Terminal Heat Pump Systems

Thermally driven heat pump systems play important roles in the utilization of low-grade thermal energy. In order to evaluate and compare the performances of three different constructions of thermally driven heat pump and heat transformer, the low-dissipation assumption has been adopted to establish the irreversible thermodynamic models of them in the present paper. By means of the proposed models, the heating loads, the coefficients of performance (COPs) and the optimal relations between them for various constructions are derived and discussed. The performances of different constructions are numerically assessed. More importantly, according to the results obtained, the upper and lower bounds of the COP at maximum heating load for different constructions are generated and compared by the introduction of a parameter measuring the deviation from the reversible limit of the system. Accordingly, the optimal constructions for the low-dissipation three-terminal heat pump and heat transformer are determined within the frame of low-dissipation assumption, respectively. The optimal constructions in accord with previous research and engineering practices for various three-terminal devices are obtained, which confirms the compatibility between the low-dissipation model and endoreversible model and highlights the validity of the application of low-dissipation model for multi-terminal thermodynamic devices. The proposed models and the significant results obtained enrich the theoretical thermodynamic model of thermally driven heat pump systems and may provide some useful guidelines for the design and operation of realistic thermally driven heat pump systems.

Quantum Otto engine working with interacting spin systems: Finite power performance in stochastic thermodynamics

A quantum Otto engine using two-interacting spins as its working medium is analyzed within framework of stochastic thermodynamics. The time-dependent power fluctuations and average power are explicitly derived for a complete cycle of engine operation. We find that the efficiency and power fluctuations are affected significantly by interparticle interactions, but both of them become interaction-independent under maximal power via optimizing the external control parameter. The behavior of the efficiency at maximum power is further explained by analyzing the optimal protocol of the engine.

Optimal performance of a three-level quantum refrigerator

We study the optimal performance of a three-level quantum refrigerator using two different objective functions: cooling power and χ function. For both cases, we obtain general expressions for the coefficient of performance (COP) and derive its well-known lower and upper bounds for the limiting cases when the ratio of system-bath coupling constants at the hot and cold contacts approaches infinity and zero, respectively. We also show that the cooling power can be maximized with respect to one control frequency, while χ function can be maximized globally with respect to two control frequencies. Additionally, we show that in the low-temperature regime, our model of refrigerator can be mapped to Feynman's ratchet and pawl model, a classical mesoscopic heat engine. In the parameter regime where both cooling power and χ function can be maximized, we compare the cooling power of the quantum refrigerator at maximum χ function with the maximum cooling power.

Maximum efficiency of low-dissipation refrigerators at arbitrary cooling power

We analytically derive maximum efficiency at given cooling power for Carnot-type low-dissipation refrigerators. The corresponding optimal cycle duration depends on a single parameter, which is a specific combination of irreversibility parameters and bath temperatures. For a slight decrease in power with respect to its maximum value, the maximum efficiency exhibits an infinitely fast nonlinear increase, which is standard in heat engines, only for a limited range of parameters. Otherwise, it increases only linearly with the slope given by ratio of irreversibility parameters. This behavior can be traced to the fact that maximum power is attained for vanishing duration of the hot isotherm. Due to the lengthiness of the full solution for the maximum efficiency, we discuss and demonstrate these results using simple approximations valid for parameters yielding the two different qualitative behaviors. We also discuss relation of our findings to those obtained for minimally nonlinear irreversible refrigerators.

Energetic Self-Optimization Induced by Stability in Low-Dissipation Heat Engines

The local stability of a weakly dissipative heat engine is analyzed and linked to an energetic multi-objective optimization perspective. This constitutes a novel issue in the unified study of cyclic energy converters, opening the perspective to the possibility that stability favors self-optimization of thermodynamic quantities including efficiency, power and entropy generation. To this end, a dynamics simulating the restitution forces, which mimics a harmonic potential, bringing the system back to the steady state is analyzed. It is shown that relaxation trajectories are not arbitrary but driven by the improvement of several energetic functions. Insights provided by the statistical behavior of consecutive random perturbations show that the irreversible behavior works as an attractor for the energetics of the system, while the endoreversible limit acts as an upper bound and the Pareto front as a global attractor. Fluctuations around the operation regime reveal a difference between the behavior coming from fast and slow relaxation trajectories: while the former are associated to an energetic self-optimization evolution, the latter are ascribed to better performances. The self-optimization induced by stability and the possible use of instabilities in the operation regime to improve the energetic performance might usher into new useful perspectives in the control of variables for real engines.

Optimization induced by stability and the role of limited control near a steady state

A relationship between stability and self-optimization is found for weakly dissipative heat devices. The effect of limited control on operation variables around an steady state is such that, after instabilities, the paths toward relaxation are given by trajectories stemming from restitution forces which improve the system thermodynamic performance (power output, efficiency, and entropy generation). Statistics over random trajectories for many cycles shows this behavior as well. Two types of dynamics are analyzed, one where an stability basin appears and another one where the system is globally stable. Under both dynamics there is an induced trend in the control variables space due to stability. In the energetic space this behavior translates into a preference for better thermodynamic states, and thus stability could favor self-optimization under limited control. This is analyzed from the multiobjective optimization perspective. As a result, the statistical behavior of the system is strongly influenced by the Pareto front (the set of points with the best compromise between several objective functions) and the stability basin. Additionally, endoreversible and irreversible behaviors appear as very relevant limits: The first one is an upper bound in energetic performance, connected with the Pareto front, and the second one represents an attractor for the stochastic trajectories.

Finite-power performance of quantum heat engines in linear response

We investigate the finite-power performance of quantum heat engines working in the linear response regime where the temperature gradient is small. The engine cycles with working substances of ideal harmonic systems consist of two heat transfer and two adiabatic processes, such as the Carnot cycle, Otto cycle, and Brayton cycle. By analyzing the optimal protocol under maximum power we derive the explicitly analytic expression for the irreversible entropy production, which becomes the low dissipation form in the long duration limit. Assuming the engine to be endoreversible, we derive the universal expression for the efficiency at maximum power, which agrees well with that obtained from the phenomenological heat transfer laws holding in the classical thermodynamics. Through appropriate identification of the thermodynamic fluxes and forces that a linear relation connects, we find that the quantum engines under consideration are tightly coupled, and the universality of efficiency at maximum power is confirmed at the linear order in the temperature gradient.

Optimization and Stability of Heat Engines: The Role of Entropy Evolution

Local stability of maximum power and maximum compromise (Omega) operation regimes dynamic evolution for a low-dissipation heat engine is analyzed. The thermodynamic behavior of trajectories to the stationary state, after perturbing the operation regime, display a trade-off between stability, entropy production, efficiency and power output. This allows considering stability and optimization as connected pieces of a single phenomenon. Trajectories inside the basin of attraction display the smallest entropy drops. Additionally, it was found that time constraints, related with irreversible and endoreversible behaviors, influence the thermodynamic evolution of relaxation trajectories. The behavior of the evolution in terms of the symmetries of the model and the applied thermal gradients was analyzed.

Entropy generation and unified optimization of Carnot-like and low-dissipation refrigerators

The connection between Carnot-like and low-dissipation refrigerators is proposed by means of their entropy generation and the optimization of two unified, compromise-based figures of merit. Their optimization shows that only a limited set of heat transfer laws in the Carnot-like model are compatible with the results stemming from the low-dissipation approximation, even though there is an agreement of the related physical spaces of variables. A comparison between two operation regimes and relations among entropy generation, efficiency, cooling power. and power input are obtained, with emphasis on the role of dissipation symmetries. The results extend previous findings for heat engines at maximum power conditions.

General relations between the power, efficiency, and dissipation for the irreversible heat engines in the nonlinear response regime

We derive the general relations between the maximum power, maximum efficiency, and minimum dissipation for the irreversible heat engine in a nonlinear response regime. In this context, we use the minimally nonlinear irreversible model and obtain the lower and upper bounds of the above relations for the asymmetric dissipation limits. These relations can be simplified further when the system possesses the time-reversal symmetry or antisymmetry. We find that our results are the generalization of various such relations obtained earlier for different heat engines.

Route towards the optimization at given power of thermoelectric heat engines with broken time-reversal symmetry

We investigate the performance at a given power of a thermoelectric heat engine with broken time-reversal symmetry, and derive analytically the efficiency at a given power of a thermoelectric generator within linear irreversible thermodynamics. A universal bound on the efficiency of the thermoelectric heat engine is achieved under a strong constraint on the Onsager coefficients, and some interesting features are further revealed. Our results demonstrate that there exists a trade-off between efficiency and power output, and the efficiency at a given power may surpass the Curzon-Ahlborn limit due to broken time-reversal symmetry. Moreover, optimal efficiency at a given power can be achieved, which indicates that broken time-reversal symmetry offers physically allowed ways to optimize the performance of heat engines. Our study may contribute to the interesting guidelines for optimizing actual engines.

Universality of maximum-work efficiency of a cyclic heat engine based on a finite system of ultracold atoms

We study the performance of a cyclic heat engine which uses a small system with a finite number of ultracold atoms as its working substance and works between two heat reservoirs at constant temperatures T h and T c ( Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

Zhuolin Ye Department of Physics, Nanchang University, Nanchang, 330031, China
Yingying Hu Department of Physics, Nanchang University, Nanchang, 330031, China
Jizhou He Department of Physics, Nanchang University, Nanchang, 330031, China
Jianhui Wang Department of Physics, Nanchang University, Nanchang, 330031, China. Department of Chemistry and Biochemistry, University of Maryland, College Park, MD, 20742, USA. State Key Laboratory of Theoretical Physics, Institute of Theoretical Physics, Chinese Academy of Sciences, Beijing, 100190, China.

Collapse

Maximum efficiency of steady-state heat engines at arbitrary power

We discuss the efficiency of a heat engine operating in a nonequilibrium steady state maintained by two heat reservoirs. Within the general framework of linear irreversible thermodynamics we derive a universal upper bound on the efficiency of the engine operating at arbitrary fixed power. Furthermore, we show that a slight decrease of the power below its maximal value can lead to a significant gain in efficiency. The presented analysis yields the exact expression for this gain and the corresponding upper bound.

Optimal performance of periodically driven, stochastic heat engines under limited control

We consider the performance of periodically driven stochastic heat engines in the linear response regime. Reaching the theoretical bounds for efficiency and efficiency at maximum power typically requires full control over the design and the driving of the system. We develop a framework which allows us to quantify the role that limited control over the system has on the performance. Specifically, we show that optimizing the driving entering the work extraction for a given temperature protocol leads to a universal, one-parameter dependence for both maximum efficiency and maximum power as a function of efficiency. In particular, we show that reaching Carnot efficiency (and, hence, Curzon-Ahlborn efficiency at maximum power) requires to have control over the amplitude of the full Hamiltonian of the system. Since the kinetic energy cannot be controlled by an external parameter, heat engines based on underdamped dynamics can typically not reach Carnot efficiency. We illustrate our general theory with a paradigmatic case study of a heat engine consisting of an underdamped charged particle in a modulated two-dimensional harmonic trap in the presence of a magnetic field.

Optimizing work output for finite-sized heat reservoirs: Beyond linear response

We uncover an optimization principle for the finite-time heat-work conversion process performed between two finite-sized heat reservoirs in the nonlinear response regime that is characterized by rather generic flux-force relations. We solve the problem of maximizing work output in a given time interval by means of the variational method. Moreover, in the limiting case that the cold reservoir is infinite, we find the corresponding optimized process can be determined by a single quantity, which plays the role similar to that of the Hamiltonian in classical mechanics. Some theoretical implications are discussed consequently, under the generalized tight-coupling condition which applies to both linear and nonlinear response cases. Our results can hopefully help design and control realistic thermodynamical processes.