Cantilever bending with rough surfaces

Wafer-Scale Electroactive Nanoporous Silicon: Large and Fully Reversible Electrochemo-Mechanical Actuation in Aqueous Electrolytes

Nanoporosity in silicon results in interface-dominated mechanics, fluidics, and photonics that are often superior to the ones of the bulk material. However, their active control, for example, by electronic stimuli, is challenging due to the absence of intrinsic piezoelectricity in the base material. Here, for large-scale nanoporous silicon cantilevers wetted by aqueous electrolytes, electrosorption-induced mechanical stress generation of up to 600 kPa that is reversible and adjustable at will by potential variations of ≈1 V is shown. Laser cantilever bending experiments in combination with in operando voltammetry and step coulombmetry allow this large electro-actuation to be traced to the concerted action of 100 billions of parallel nanopores per square centimeter cross-section and determination of the capacitive charge-stress coupling parameter upon ion adsorption and desorption as well as the intimately related stress actuation dynamics for perchloric and isotonic saline solutions. A comparison with planar silicon surfaces reveals mechanistic insights on the observed electrocapillarity (Hellmann-Feynman interactions) with respect to the importance of oxide formation and wall roughness on the single-nanopore scale. The observation of robust electrochemo-mechanical actuation in a mainstream semiconductor with wafer-scale, self-organized nanoporosity opens up novel opportunities for on-chip integrated stress generation and actuorics at exceptionally low operation voltages.

Surface stress of graphene layers supported on soft substrate

We obtain the surface stress of a single layer and multilayers of graphene supported on silicone substrates by measuring the deformation of the graphene-covered substrates induced by the surface tension of liquid droplets together with the Neumann’s triangle concept. We find that the surface stress of the graphene-covered substrate is significant larger than that of the bare substrate, and it increases with increasing graphene layers, and finally reaches a constant value of about 120 mN/m on three and more layers of graphene. This work demonstrates that the apparent surface stress of graphene-substrate systems can be tuned by the substrate and the graphene layers. The surface stress and the tuning effect of the substrate on it may have applications in design and characterization of graphene-based ultra-sensitive sensors and other devices. Moreover, the method may also be used to measure the surface stress of other ultrathin films supported on soft substrates.

Reversible electrochemical actuation of metallic nanohoneycombs induced by pseudocapacitive redox processes

Current metallic-based electrochemical actuators are limited to nanoporous gold/platinum with randomly distributed pores, where the charge-induced reversible strain is mainly due to the nonfaradic charging/discharging processes along the capacitive electrochemical double layer. Here, we report an electrochemical actuating property of nanohoneycomb-structured nickel, with the actuation mechanism mainly due to a pseudocapacitive behavior by means of reversible faradic redox reactions. By using a dual-template synthesis method, a bilayered cantilever, comprising a nanohoneycomb layer backed by a solid layer of the same metal, was fabricated. Reversible bending of the cantilever upon cyclic potential triggering was observed. The strain of the cantilever increases nonlinearly with both potential and charge due to redox reactions. The maximum strain that can be achieved under a certain scan rate complies with a linear relationship with the capacity. Benefiting from the stable Ni(II)/Ni(III) redox couples at the electrode surface, the reversible actuation is very stable in hydroxide solutions.

Size-dependent mechanical properties of axial and radial mixed AlN/GaN nanostructure

In this paper, continuum multiscale models are proposed to describe the size-dependent mechanical properties of two kinds of heterogeneous nanostructures: radially heterogeneous nanowires and longitudinally heterogeneous nanolaminates. In both cases, the continuum models involve additional surface/interface energies, which allow capturing size effects. Several models of imperfect interface models, like coherent and spring-layer ones, are shown to respectively capture the size effects, which are reported by first-principles calculations performed on heterogeneous nanostructures. In each case, a procedure is proposed to identify the parameters of the surface/interface model in the continuum framework, based on first-principles calculations performed on slab systems. The obtained continuum models allow avoiding full computations on atomistic models, which are not affordable for large sizes (diameters, layer thickness). An increase of the overall stiffness for both kinds of heterogeneous AlN/GaN nanostructures with the decrease of the dimensions is evidenced. The continuum models are then compared with full first-principles calculations to demonstrate their accuracy and their ability to capture size effects.

Electrocapillary coupling at rough surfaces

The surface roughness of an electrode has a strong impact on the apparent value of electrocapillary coupling coefficient, ς_eff, which relates the response of electrode potential to tangential strain.

Carbohydrate coating reduces adhesion of biofilm-forming Bacillus subtilis to gold surfaces

The growth of bacterial biofilms in pipes and food tanks causes severe problems in industry. Biofilms growing on medical implants or catheters are of great concern, as they can cause serious infections and decrease the functionality of the medical device. The prevention of bacterial adhesion--the first step in colonization and biofilm formation--is therefore very important. Current research comprises alterations in surface properties, the prevention of adhesin biosynthesis, inhibition with receptor analogs, or the development of anti-adhesive vaccines. We present a new approach that allows us to study bacterial adhesion with high sensitivity in real-time while testing several different surfaces in parallel. Using the cantilever-array technique we demonstrate that coating of gold surfaces with mono- or disaccharides results in a reduction of the bacterial adhesion of the biofilm-forming bacterium Bacillus subtilis NCIB 3610 to these gold surfaces. This reduction in bacterial adhesion is independent of the studied carbohydrate. Using several mutant strains, we investigate the underlying molecular interactions, and our results suggest that adhesion to gold surfaces is mediated by thiol groups present in proteins of the bacterial cell membrane or biofilm matrix proteins expressed at low levels by the wild-type strain. Furthermore, our data indicate that the adhesion of B. subtilis NCIB 3610 to carbohydrate-coated gold surfaces is facilitated by interactions between carbohydrates installed on the cantilever gold surface and an exopolysaccharide expressed by this strain. Understanding general and specific contributions of molecular interactions mediating bacterial adhesion will enable its prevention in the future.

Biosensors based on nanomechanical systems

The advances in micro- and nanofabrication technologies enable the preparation of increasingly smaller mechanical transducers capable of detecting the forces, motion, mechanical properties and masses that emerge in biomolecular interactions and fundamental biological processes. Thus, biosensors based on nanomechanical systems have gained considerable relevance in the last decade. This review provides insight into the mechanical phenomena that occur in suspended mechanical structures when either biological adsorption or interactions take place on their surface. This review guides the reader through the parameters that change as a consequence of biomolecular adsorption: mass, surface stress, effective Young's modulus and viscoelasticity. The mathematical background needed to correctly interpret the output signals from nanomechanical biosensors is also outlined here. Other practical issues reviewed are the immobilization of biomolecular receptors on the surface of nanomechanical systems and methods to attain that in large arrays of sensors. We then describe some relevant realizations of biosensor devices based on nanomechanical systems that harness some of the mechanical effects cited above. We finally discuss the intrinsic detection limits of the devices and the limitation that arises from non-specific adsorption.

Stress and DNA assembly differences on cantilevers gold coated by resistive and e-beam evaporation techniques

Changes in the sign of differential surface stress of gold-coated cantilevers produced by thiol-derivatized single-stranded DNA immobilization are observed, depending on the method used to deposit the gold. While the DNA immobilization on e-beam gold-coated cantilevers produces a compressive differential surface stress in the metallic layer, the opposite is observed for resistively coated cantilevers under the same immobilization conditions. The gold films exhibit quite a similar morphology, and the immobilization differences seem to be related to the charge state of the metallic layer surface. This in turn produces a different distribution of the orientation of the DNA strands on the gold layer. A tentative explanation for the observed effect is proposed.