1
|
Niu WA, Smith MN, Santore MM. Depletion attractions drive bacterial capture on both non-fouling and adhesive surfaces, enhancing cell orientation. SOFT MATTER 2022; 18:9205-9215. [PMID: 36426747 PMCID: PMC9837788 DOI: 10.1039/d2sm01248k] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
Abstract
Depletion attractions, occurring between surfaces immersed in a polymer solution, drive bacteria adhesion to a variety of surfaces. The latter include the surfaces of non-fouling coatings such as hydrated polyethylene glycol (PEG) layers but also, as demonstrated in this work, surfaces that are bacteria-adhesive, such as that of glass. Employing a flagella free E. coli strain, we demonstrate that cell adhesion on glass is enhanced by dissolved polyethylene oxide (PEO), exhibiting a faster rate and greater numbers of captured cells compared with the slower capture of the same cells on glass from a buffer solution. After removal of depletant, any cell retention appears to be governed by the substrate, with cells immediately released from non-fouling PEG surfaces but retained on glass. A distinguishing feature of cells captured by depletion on PEG surfaces is their orientation parallel to the surface and very strong alignment with flow. This suggests that, in the moments of capture, cells are able to rotate as they adhere. By contrast on glass, captured cells are substantially more upright and less aligned by flow. On glass the free polymer exerts forces that slightly tip cells towards the surface. Free polymer also holds cells still on adhesive and non-fouling surfaces alike but, upon removal of free PEO, cells retained on glass tend to be held by one end and exhibit a Brownian type rotational rocking.
Collapse
Affiliation(s)
- Wuqi Amy Niu
- Department of Polymer Science and Engineering University of Massachusetts, 120 Governors Drive, Amherst, MA 01003, USA.
| | - Morgan N Smith
- Department of Polymer Science and Engineering University of Massachusetts, 120 Governors Drive, Amherst, MA 01003, USA.
| | - Maria M Santore
- Department of Polymer Science and Engineering University of Massachusetts, 120 Governors Drive, Amherst, MA 01003, USA.
| |
Collapse
|
2
|
Santore MM. Interplay of physico-chemical and mechanical bacteria-surface interactions with transport processes controls early biofilm growth: A review. Adv Colloid Interface Sci 2022; 304:102665. [PMID: 35468355 DOI: 10.1016/j.cis.2022.102665] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/06/2022] [Revised: 04/03/2022] [Accepted: 04/04/2022] [Indexed: 11/01/2022]
Abstract
Biofilms initiate when bacteria encounter and are retained on surfaces. The surface orchestrates biofilm growth through direct physico-chemical and mechanical interactions with different structures on bacterial cells and, in turn, through its influence on cell-cell interactions. Individual cells respond directly to a surface through mechanical or chemical means, initiating "surface sensing" pathways that regulate gene expression, for instance producing extra cellular matrix or altering phenotypes. The surface can also physically direct the evolving colony morphology as cells divide and grow. In either case, the physico-chemistry of the surface influences cells and cell communities through mechanisms that involve additional factors. For instance the numbers of cells arriving on a surface from solution relative to the generation of new cells by division depends on adhesion and transport kinetics, affecting early colony density and composition. Separately, the forces experienced by adhering cells depend on hydrodynamics, gravity, and the relative stiffnesses and viscoelasticity of the cells and substrate materials, affecting mechanosensing pathways. Physical chemistry and surface functionality, along with interfacial mechanics also influence cell-surface friction and control colony morphology, in particular 2D and 3D shape. This review focuses on the current understanding of the mechanisms in which physico-chemical interactions, deriving from surface functionality, impact individual cells and cell community behavior through their coupling with other interfacial processes.
Collapse
|
3
|
Jani P, Nayani K, Abbott NL. Sculpting the shapes of giant unilamellar vesicles using isotropic-nematic-isotropic phase cycles. SOFT MATTER 2021; 17:9078-9086. [PMID: 34558596 DOI: 10.1039/d1sm00910a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Understanding how soft matter deforms in response to mechanical interactions is central to the design of functional synthetic materials as well as elucidation of the behaviors of biological assemblies. Here we explore how cycles of thermally induced transitions between nematic (N) and isotropic (I) phases can be used to exert cyclical elastic stresses on dispersions of giant unilamellar vesicles (GUVs) and thereby evolve GUV shape and properties. The measurements were enabled by the finding that I-N-I phase transitions of the lyotropic chromonic liquid crystal disodium cromoglycate, when conducted via an intermediate columnar (M) phase, minimized transport of GUVs on phase fronts to confining surfaces. Whereas I to N phase transitions strained spherical GUVs into spindle-like shapes, with an efflux of GUV internal volume, subsequent N to I transitions generated a range of complex GUV shapes, including stomatocyte, pear- and dumbbell-like shapes that depended on the extent of strain in the N phase. The highest strained GUVs were observed to form buds (daughter vesicles) that we show, via a cycle of I-N-I-N phase transitions, are connected via a neck to the parent vesicle. Additional experiments established that changes in elasticity of the phase surrounding the GUVs and not thermal expansion of membranes were responsible for the shape transitions, and that I-N-I transformations that generate stomatocytes can be understood from the Bilayer-Coupling model of GUV shapes. Overall, these observations advance our understanding of how LC elastic stresses can be regulated to evolve the shapes of soft biological assemblies as well as provide new approaches for engineering synthetic soft matter.
Collapse
Affiliation(s)
- Purvil Jani
- School of Chemical and Biomolecular Engineering, Cornell University, Ithaca, NY, USA.
| | - Karthik Nayani
- Department of Chemical Engineering, University of Arkansas, Fayetteville, AR, USA
| | - Nicholas L Abbott
- School of Chemical and Biomolecular Engineering, Cornell University, Ithaca, NY, USA.
| |
Collapse
|
4
|
Niu WA, Rivera SL, Siegrist MS, Santore MM. Depletion forces drive reversible capture of live bacteria on non-adhesive surfaces. SOFT MATTER 2021; 17:8185-8194. [PMID: 34525168 DOI: 10.1039/d1sm00631b] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Because bacterial adhesion to surfaces is associated with infections and biofilm growth, it has been a longstanding goal to develop coatings that minimize biomolecular adsorption and eliminate bacteria adhesion. We demonstrate that, even on carefully-engineered non-bioadhesive coatings such as polyethylene glycol (PEG) layers that prevent biomolecule adsorption and cell adhesion, depletion interactions from non-adsorbing polymer in solution (such as 10 K PEG or 100 K PEO) can cause adhesion and retention of Escherichia coli cells, defeating the antifouling functionality of the coating. The cells are immobilized and remain viable on the timescale of the study, at least up to 45 minutes. When the polymer solution is replaced by buffer, cells rapidly escape from the surface, consistent with expectations for the reversibility of depletion attractions. The dissolved polymer additionally causes cells to aggregate in solution and aggregates rapidly dissociate to singlets upon tenfold dilution in buffer, also consistent with depletion. Hydrodynamic forces can substantially reduce the adhesion of aggregates on surfaces in conditions where single cells adhere via depletion. The findings reported here suggest that because bacteria thrive in polymer-rich environments both in vivo and in situ, depletion interactions may make it impossible to avoid bacterial retention on surfaces.
Collapse
Affiliation(s)
- Wuqi Amy Niu
- Department of Polymer Science and Engineering, University of Massachusetts, Governors Drive, Amherst, MA 01003, USA.
| | - Sylvia L Rivera
- Department of Microbiology, University of Massachusetts, Amherst, MA 01003, USA
| | - M Sloan Siegrist
- Department of Microbiology, University of Massachusetts, Amherst, MA 01003, USA
- Molecular and Cellular Biology Graduate Program, University of Massachusetts, Amherst, MA 01003, USA
| | - Maria M Santore
- Department of Polymer Science and Engineering, University of Massachusetts, Governors Drive, Amherst, MA 01003, USA.
- Molecular and Cellular Biology Graduate Program, University of Massachusetts, Amherst, MA 01003, USA
| |
Collapse
|
5
|
Abstract
Two areas of research that have greatly increased in attention are: dipterans as vectors and the microbes they are capable of vectoring. Because it is the front-end of the fly that first encounters these microbes, this review focuses on the legs, mouthparts, and foregut, which includes the crop as major structures involved in dipteran vectoring ability. The legs and mouthparts are generally involved in mechanical transmission of microbes. However, the crop is involved in more than just mechanical transmission, for it is within the lumen of the crop that microbes are taken up with the meal of the fly, stored, and it is within the lumen that horizontal transmission of bacterial resistance has been demonstrated. In addition to storage of microbes, the crop is also involved in depositing the microbes via a process known as regurgitation. Various aspects of crop regulation are discussed and specific examples of crop involvement with microorganisms are discussed. The importance of biofilm and biofilm formation are presented, as well as, some physical parameters of the crop that might either facilitate or inhibit biofilm formation. Finally, there is a brief discussion of dipteran model systems for studying crop microbe interactions.
Collapse
Affiliation(s)
- John G Stoffolano
- Stockbridge School of Agriculture, University of Massachusetts, Amherst, MA, United States
| |
Collapse
|
6
|
Chen D, Santore MM. Hybrid copolymer-phospholipid vesicles: phase separation resembling mixed phospholipid lamellae, but with mechanical stability and control. SOFT MATTER 2015; 11:2617-26. [PMID: 25687473 DOI: 10.1039/c4sm02502d] [Citation(s) in RCA: 38] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/22/2023]
Abstract
Vesicles whose bilayer membranes contain phospholipids mixed with co-polymers or surfactants comprise new hybrid materials having potential applications in drug delivery, sensors, and biomaterials. Here we describe a model polymer-phospholipid hybrid membrane system exhibiting strong similarities to binary phospholipid mixtures, but with more robust membrane mechanics. A lamella-forming graft copolymer, PDMS-co-PEO (polydimethylsiloxane-co-polyethylene oxide) was blended with a high melting temperature phospholipid, DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine), over a broad compositional range. The resulting giant hybrid unilamellar vesicles were compared qualitatively and quantitatively to analogous mixed phospholipid membranes in which a low melting temperature phospholipid, DOPC (1,2-dioleoyl-sn-glycero-3-phosphocholine), was blended with DPPC. The mechanical properties of the hybrid vesicles, even when phase separated, were robust with high lysis stresses and strains approaching those of the pure copolymer vesicles. The temperature-composition phase diagram of the hybrid vesicles closely resembled that of the mixed phospholipids; with only slightly greater nonidealities in the hybrid compared with DOPC/DPPC mixed membranes. In both systems, it was demonstrated that tension could be used to manipulate DPPC solidification into domains of patchy or striped morphologies that exhibited different tracer incorporation. The patch and stripe-shaped domains are thought to be different solid DPPC polymorphys: ripple and tilt (or gel). This work demonstrates that in mixed-phospholipid bilayers where a high-melting phospholipid solidifies on cooling, the lower-melting phospholipid may be substituted by an appropriate copolymer to improve mechanical properties while retaining the underlying membrane physics.
Collapse
Affiliation(s)
- Dong Chen
- Department of Physics, University of Massachusetts at Amherst, 120 Governors Drive, Amherst, MA 01003, USA
| | | |
Collapse
|
7
|
Fang B, Jiang Y, Rotello VM, Nüsslein K, Santore MM. Easy come easy go: surfaces containing immobilized nanoparticles or isolated polycation chains facilitate removal of captured Staphylococcus aureus by retarding bacterial bond maturation. ACS NANO 2014; 8:1180-1190. [PMID: 24422487 DOI: 10.1021/nn405845y] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Adhesion of bacteria is a key step in the functioning of antimicrobial surfaces or certain types of on-line sensors. The subsequent removal of these bacteria, within a ∼ 10-30 min time frame, is equally important but complicated by the tendency of bacterial adhesion to strengthen within minutes of initial capture. This study uses Staphylococcus aureus as a model bacterium to demonstrate the general strategy of clustering adhesive surface functionality (at length scales smaller than the bacteria themselves) on otherwise nonadhesive surfaces to capture and retain bacteria (easy come) while limiting the progressive strengthening of adhesion. The loose attachment facilitates bacteria removal by moderate shearing flow (easy go). This strategy is demonstrated using surfaces containing sparsely and randomly arranged immobilized amine-functionalized nanoparticles or poly-l-lysine chains, about 10 nm in size. The rest of the surface is backfilled with a nonadhesive polyethylene glycol (PEG) brush that, by itself, repels S. aureus. The nanoparticles or polymer chains cluster cationic functionality, providing small regions that attract negatively charged S. aureus cells. Compared with surfaces of nearly uniform cationic character where S. aureus adhesion quickly becomes strong (on a time scale less than 5 min), placement of cationic charge in small clusters retards or prevents processes that increase bacteria adhesion on a time scale of ∼ 30 min, providing "easy go" surfaces.
Collapse
Affiliation(s)
- Bing Fang
- Department of Polymer Science and Engineering, ‡Department of Chemistry, and §Department of Microbiology, University of Massachusetts at Amherst , Amherst, Massachusetts 01003, United States
| | | | | | | | | |
Collapse
|
8
|
Yi X, Shi X, Gao H. A universal law for cell uptake of one-dimensional nanomaterials. NANO LETTERS 2014; 14:1049-55. [PMID: 24459994 DOI: 10.1021/nl404727m] [Citation(s) in RCA: 44] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/07/2023]
Abstract
Understanding cell interaction with one-dimensional nanomaterials, including nanotubes, nanowires, nanofibers, filamentous bacteria, and certain nanoparticle chains, has fundamental importance to many applications such as biomedical diagnostics, therapeutics, and nanotoxicity. Here we show that cell uptake of one-dimensional nanomaterials via receptor-mediated endocytosis is dominated by a single dimensionless parameter that scales with the membrane tension and radius of the nanomaterial and inversely with the membrane bending stiffness. It is shown that as cell membrane internalizes one-dimensional nanomaterials the uptake follows a near-perpendicular entry mode at small membrane tension but it switches to a near-parallel interaction mode at large membrane tension.
Collapse
Affiliation(s)
- Xin Yi
- School of Engineering, Brown University , Providence, Rhode Island 02912, United States
| | | | | |
Collapse
|
9
|
Gon S, Kumar KN, Nüsslein K, Santore MM. How Bacteria Adhere to Brushy PEG Surfaces: Clinging to Flaws and Compressing the Brush. Macromolecules 2012; 45:8373-8381. [PMID: 23148127 PMCID: PMC3494094 DOI: 10.1021/ma300981r] [Citation(s) in RCA: 62] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
This study examined the compression of solvated polymer brushes on bioengineered surfaces during the initial stages of Staphylococcus Aureus (S. aureus) adhesion from gentle flow. A series of PEG [poly(ethylene glycol)] brushes, 7 to 17 nm in height and completely non-adhesive to proteins and bacteria, were modified by the incorporation of sparse isolated ~10 nm cationic polymer "patches" at their bases. These nanoscale regions, which lacked PEG tethers, were electrostatically attractive towards negative bacteria or proteins. S. aureus drawn to the interface by multiple adhesive patches compressed the PEG brush in the remaining contact region. The observed onset of bacterial or fibrinogen capture with increases in patch content was compared with calculations. Balancing the attraction energy (proportional to the number of patches engaging a bacterium during capture) against steric forces (calculated using the Alexander-DeGennes treatment) provided perspective on the brush compression. The results were consistent with a bacteria-surface gap on the order of the Debye length in these studies. In this limit of strong brush compression, structural features (height, persistence length) of the brush were unimportant so that osmotic pressure dominated the steric repulsion. Thus, the dominant factor for bacterial repulsion was the mass of PEG in the brush. This result explains empirical reports in the literature that identify the total PEG content of a brush as a criteria for prevention of bioadhesion, independent of tether length and spacing, within a reasonable range for those parameters. Bacterial capture was also compared to that of protein capture. It was found, surprisingly, that the patchy brushes were more protein-than bacteria-resistant. S. aureus adhesion driven by patches within otherwise protein-resistant PEG brushes was explained by the bacteria's greater tendency to compress large areas of brush to interact with many patches. By contrast, proteins are thought to penetrate the brush at a few sites of PEO-free patches. The finding provides a mechanism for the literature reports that in-vitro protein resistance is a poor predictor of in-vitro implant failure related to cell-surface adhesion.
Collapse
Affiliation(s)
- S Gon
- Department of Chemical Engineering, Univeristy of Massachusetts Amherst, MA 01003
| | | | | | | |
Collapse
|