Highly efficient multichannel spin-polarization detection

Improvement of image-type very-low-energy-electron-diffraction spin polarimeter

Spin- and angle-resolved photoemission spectroscopy (SARPES) with high efficiency and resolution plays a crucial role in exploring the fine spin-resolved band structures of quantum materials. Here, we report the performance of the SARPES instrument with a second-generation home-made multichannel very-low-energy-electron-diffraction spin polarimeter. Its energy and angular resolutions achieve 7.2 meV and 0.52°, respectively. We present the results of SARPES measurements of Bi(111) film to demonstrate its performance. Combined with the density functional theory calculations, the spin polarization of the bulk states was confirmed by the spin-layer locking caused by the local inversion asymmetry. The surface states at a binding energy of 0.77 eV are found with 1.0 ± 0.11 spin polarization. Better resolutions and stability compared with the first-generation one provide a good platform to investigate the spin-polarized electronic states in materials.

Direct observation of spin-resolved valence band electronic states from a buried magnetic layer with hard X-ray photoemission

We report spin-resolved hard X-ray photoelectron spectroscopy (spin-HAXPES) for a buried Fe thin film in the valence band region. For the spin-HAXPES experiments, we developed an ultracompact built-in Mott-type spin-filter in a sample carrier, which enabled us to use the merit of two-dimensional (2D) multi-channel detector in a recent photoelectron analyser without modifying an apparatus for HAXPES. The effective Sherman function and the single-channel figure of merit (FOM) of the spin-filter were assessed to be -0.07 and 2.0 × 10^-4, respectively. By utilizing the 2D detector of the photoelectron analyser, the effective FOM increased by a factor of ~4 × 10⁴ compared to the case when only 1 channel of the 2D detector was used. We have applied spin-HAXPES to MgO(2 nm)/Fe(50 nm)/MgO(001) structures. The spin-HAXPES experiments revealed the majority and minority spin electronic states and the spin polarisation of the buried Fe thin film. Due to the large photoionization cross-section of the 4s orbital of Fe in HAXPES, the spin-resolved spectra mainly reflected the Fe 3d and 4s states. The observed spin-HAXPES and spin polarisation spectral shapes agreed well with the calculated spin-resolved cross-section weighted densities of states and spin polarisation spectra. In contrast, a small discrepancy in the energy scale was recognised due to the electron correlation effects. These results suggest that the electron correlation effects are important in the electronic structure of bulk Fe, and spin-HAXPES is useful for detecting genuine spin-resolved valence band electronic structures of buried magnetic materials.

A new imaging concept in spin polarimetry based on the spin-filter effect

The concept of an imaging-type 3D spin detector, based on the combination of spin-exchange interactions in the ferromagnetic (FM) film and spin selectivity of the electron-photon conversion effect in a semiconductor heterostructure, is proposed and demonstrated on a model system. This novel multichannel concept is based on the idea of direct transfer of a 2D spin-polarized electron distribution to image cathodoluminescence (CL). The detector is a hybrid structure consisting of a thin magnetic layer deposited on a semiconductor structure allowing measurement of the spatial and polarization-dependent CL intensity from injected spin-polarized free electrons. The idea is to use spin-dependent electron transmission through in-plane magnetized FM film for in-plane spin detection by measuring the CL intensity from recombined electrons transmitted in the semiconductor. For the incoming electrons with out-of-plane spin polarization, the intensity of circularly polarized CL light can be detected from recombined polarized electrons with holes in the semiconductor. In order to demonstrate the ability of the solid-state spin detector in the image-type mode operation, a spin detector prototype was developed, which consists of a compact proximity focused vacuum tube with a spin-polarized electron source [p-GaAs(Cs,O)], a negative electron affinity (NEA) photocathode and the target [semiconductor heterostructure with quantum wells also with NEA]. The injection of polarized low-energy electrons into the target by varying the kinetic energy in the range 0.5-3.0 eV and up to 1.3 keV was studied in image-type mode. The figure of merit as a function of electron kinetic energy and the target temperature is determined. The spin asymmetry of the CL intensity in a ferromagnetic/semiconductor (FM-SC) junction provides a compact optical method for measuring spin polarization of free-electron beams in image-type mode. The FM-SC detector has the potential for realizing multichannel 3D vectorial reconstruction of spin polarization in momentum microscope and angle-resolved photoelectron spectroscopy systems.

Single-hemisphere photoelectron momentum microscope with time-of-flight recording

Photoelectron momentum microscopy is an emerging powerful method for angle-resolved photoelectron spectroscopy (ARPES), especially in combination with imaging spin filters. These instruments record k_x-k_y images, typically exceeding a full Brillouin zone. As energy filters, double-hemispherical or time-of-flight (ToF) devices are in use. Here, we present a new approach for momentum mapping of the full half-space, based on a large single hemispherical analyzer (path radius of 225 mm). Excitation by an unfocused He lamp yielded an energy resolution of 7.7 meV. The performance is demonstrated by k-imaging of quantum-well states in Au and Xe multilayers. The α²-aberration term (α, entrance angle in the dispersive plane) and the transit-time spread of the electrons in the spherical field are studied in a large pass-energy (6 eV-660 eV) and angular range (α up to ±7°). It is discussed how the method circumvents the preconditions of previous theoretical work on the resolution limitation due to the α²-term and the transit-time spread, being detrimental for time-resolved experiments. Thanks to k-resolved detection, both effects can be corrected numerically. We introduce a dispersive-plus-ToF hybrid mode of operation, with an imaging ToF analyzer behind the exit slit of the hemisphere. This instrument captures 3D data arrays I (E_B, k_x, k_y), yielding a gain up to N² in recording efficiency (N being the number of resolved time slices). A key application will be ARPES at sources with high pulse rates such as synchrotrons with 500 MHz time structure.

Detection of femtosecond spin injection into a thin gold layer by time and spin resolved photoemission

The ultrafast demagnetization effect allows for the generation of femtosecond spin current pulses, which is expected to extend the fields of spin transport and spintronics to the femtosecond time domain. Thus far, directly observing the spin polarization induced by spin injection on the femtosecond time scale has not been possible. Herein, we present time- and spin-resolved photoemission results of spin injection from a laser-excited ferromagnet into a thin gold layer. The injected spin polarization is aligned along the magnetization direction of the underlying ferromagnet. Its decay time depends on the thickness of the gold layer, indicating that transport as well as storage of spins are relevant. This capacitive aspect of spin transport may limit the speed of future spintronic devices.

Compact setup for spin-, time-, and angle-resolved photoemission spectroscopy

We present a compact setup for spin-, time-, and angle-resolved photoemission spectroscopy. A 10 kHz titanium sapphire laser system delivers pulses of 20 fs duration, which drive a high harmonic generation-based source for ultraviolet photons at 21 eV for photoemission. The same laser also excites the sample for pump-probe experiments. Emitted electrons pass through a hemispherical energy analyzer and a spin-filtering element. The latter is based on spin-polarized low-energy electron diffraction on an Au-passivated iridium crystal. The performance of the measurement system is discussed in terms of the resolution and efficiency of the spin filter, which are higher than those for Mott-based techniques.

Time-resolved momentum microscopy with a 1 MHz high-harmonic extreme ultraviolet beamline

Recent progress in laser-based high-repetition rate extreme ultraviolet (EUV) light sources and multidimensional photoelectron spectroscopy enables the build-up of a new generation of time-resolved photoemission experiments. Here, we present a setup for time-resolved momentum microscopy driven by a 1 MHz fs EUV table-top light source optimized for the generation of 26.5 eV photons. The setup provides simultaneous access to the temporal evolution of the photoelectron's kinetic energy and in-plane momentum. We discuss opportunities and limitations of our new experiment based on a series of static and time-resolved measurements on graphene.

Relation between spin-orbit induced spin polarization, Fano-effect and circular dichroism in soft x-ray photoemission

A Feynman diagram analysis of photoemission probabilities suggests a relation between two final-state spin polarization effects, the optical spin-orientation originating from the interaction with circularly polarized light ([Formula: see text], Fano effect) and the spin polarization induced by the spin-orbit scattering ([Formula: see text], Mott effect). The analysis predicts that [Formula: see text] is proportional to the product of [Formula: see text] and the circular dichroism in the angular distribution (CDAD) of photoelectrons. To confirm this prediction, the spin polarization of photoelectrons excited by soft x-ray radiation from initial spin-degenerate bulk states of tungsten using time-of-flight momentum microscopy with parallel spin detection has been measured. By measurement of four independent photoemission intensities for two opposite spin directions and opposite photon helicity, CDAD, Fano, and Mott effect are distinguished. The results confirm the prediction from the Feynman diagram analysis.

Spin-dependent electron reflection at W(110)

Spin-dependent reflection of low-energy electrons at the W(110) surface caused by spin-orbit interaction was studied experimentally and theoretically. Comprehensive information for a wide range of electron incidence angles and energies was collected via maps for the reflectivity, the spin-dependent reflection asymmetry, and the figure of merit of the spin separation. The experimental results are compared with calculations of the scattering process using a realistic surface potential barrier. The results are discussed in view of possible applications of W(110) as a scattering target in spin-polarization detectors. Possible working points for use in single- as well as multi-channel spin-polarization-detection devices are identified and discussed.

Early Stages of Ultrafast Spin Dynamics in a 3d Ferromagnet

Prior to the development of pulsed lasers, one assigned a single local temperature to the lattice, the electron gas, and the spins. With the availability of ultrafast laser sources, one can now drive the temperature of these reservoirs out of equilibrium. Thus, the solid shows new internal degrees of freedom characterized by individual temperatures of the electron gas T_{e}, the lattice T_{l} and the spins T_{s}. We demonstrate an analogous behavior in the spin polarization of a ferromagnet in an ultrafast demagnetization experiment: At the Fermi energy, the polarization is reduced faster than at deeper in the valence band. Therefore, on the femtosecond time scale, the magnetization as a macroscopic quantity does not provide the full picture of the spin dynamics: The spin polarization separates into different parts similar to how the single temperature paradigm changed with the development of ultrafast lasers.

Recent trends in spin-resolved photoelectron spectroscopy

Since the discovery of the Rashba effect on crystal surfaces and also the discovery of topological insulators, spin- and angle-resolved photoelectron spectroscopy (SARPES) has become more and more important, as the technique can measure directly the electronic band structure of materials with spin resolution. In the same way that the discovery of high-Tc superconductors promoted the development of high-resolution angle-resolved photoelectron spectroscopy, the discovery of this new class of materials has stimulated the development of new SARPES apparatus with new functions and higher resolution, such as spin vector analysis, ten times higher energy and angular resolution than conventional SARPES, multichannel spin detection, and so on. In addition, the utilization of vacuum ultra violet lasers also opens a pathway to the realization of novel SARPES measurements. In this review, such recent trends in SARPES techniques and measurements will be overviewed.

Spin-polarised electrons in a one-magnet-only Mott spin junction

The current flowing through a Mott spin junction depends on the relative spin orientation of the two ferromagnetic layers comprising the "source" and "drain" sides of the junction. The resulting current asymmetry is detected as giant or tunnelling magnetoresistance depending on whether the two ferromagnets are separated by a metal or an insulator. Based on the fundamental principles of reciprocity for spin-dependent electron scattering, one can envisage a one-magnet-only spin junction in which the source is non-magnetic, and the spin information is encoded by the spin polarisation of the electrons that have crossed or are backscattered from the drain magnetic layer. The practical significance of using an unpolarised source is that the state of the magnetic layer can be modified without affecting the process of probing it. Whether this reciprocity is realised in the actual junctions is not yet known. Here, we demonstrate a nano-sized, one-magnet-only Mott spin junction by measuring the finite spin polarisation of the backscattered electrons. Based on this finding, we conclude that since the junction acts as a spin filter, the magnetic layer must experience a spin transfer that could become detectable in view of the high current densities achievable in this technology.

Spin-filtered time-of-flight k-space microscopy of Ir - Towards the "complete" photoemission experiment

The combination of momentum microscopy (high resolution imaging of the Fourier plane) with an imaging spin filter has recently set a benchmark in k-resolution and spin-detection efficiency. Here we show that the degree of parallelization can be further increased by time-of-flight energy recording. On the quest towards maximum information (in earlier work termed "complete" photoemission experiment) we have studied the prototypical high-Z fcc metal iridium. Large partial bandgaps and strong spin-orbit interaction lead to a sequence of spin-polarized surface resonances. Soft X-rays give access to the 4D spectral density function ρ (E_B,k_x,k_y,k_z) weighted by the photoemission cross section. The Fermi surface and all other energy isosurfaces, Fermi velocity distribution v_F(k_F), electron or hole conductivity, effective mass and inner potential can be obtained from the multi-dimensional array ρ by simple algorithms. Polarized light reveals the linear and circular dichroism texture in a simple manner and an imaging spin filter exposes the spin texture. One-step photoemission calculations are in fair agreement with experiment. Comparison of the Bloch spectral function with photoemission calculations uncovers that the observed high spin polarization of photoelectrons from bulk bands originates from the photoemission step and is not present in the initial state.

Angle-resolved photoemission spectroscopy for the study of two-dimensional materials

Quantum systems in confined geometries allow novel physical properties that cannot easily be attained in their bulk form. These properties are governed by the changes in the band structure and the lattice symmetry, and most pronounced in their single layer limit. Angle-resolved photoemission spectroscopy (ARPES) is a direct tool to investigate the underlying changes of band structure to provide essential information for understanding and controlling such properties. In this review, recent progresses in ARPES as a tool to study two-dimensional atomic crystals have been presented. ARPES results from few-layer and bulk crystals of material class often referred as “beyond graphene” are discussed along with the relevant developments in the instrumentation.

Simulations and measurements in scanning electron microscopes at low electron energy

The advent of new imaging technologies in Scanning Electron Microscopy (SEM) using low energy (0-2 keV) electrons has brought about new ways to study materials at the nanoscale. It also brings new challenges in terms of understanding electron transport at these energies. In addition, reduction in energy has brought new contrast mechanisms producing images that are sometimes difficult to interpret. This is increasing the push for simulation tools, in particular for low impact energies of electrons. The use of Monte Carlo calculations to simulate the transport of electrons in materials has been undertaken by many authors for several decades. However, inaccuracies associated with the Monte Carlo technique start to grow as the energy is reduced. This is not simply associated with inaccuracies in the knowledge of the scattering cross-sections, but is fundamental to the Monte Carlo technique itself. This is because effects due to the wave nature of the electron and the energy band structure of the target above the vacuum energy level become important and these are properties which are difficult to handle using the Monte Carlo method. In this review we briefly describe the new techniques of scanning low energy electron microscopy and then outline the problems and challenges of trying to understand and quantify the signals that are obtained. The effects of charging and spin polarised measurement are also briefly explored. SCANNING 38:802-818, 2016. © 2016 Wiley Periodicals, Inc.

Multichannel Exchange-Scattering Spin Polarimetry

Electron spin plays important roles in determining the physical and chemical properties of matter. However, measurements of electron spin are of poor quality, impeding the development of material sciences, because the spin polarimeter has a low efficiency. Here, we show an imaging-type exchange-scattering spin polarimeter with 6786 channels and an 8.5×10^{-3} single channel efficiency. As a demonstration, the fine spin structure of the electronic states in bismuth (111) is investigated, for which strong Rashba-type spin splitting behavior is seen in both the bulk and surface states. This improvement paves the way to study novel spin related phenomena with unprecedented accuracy.

Development of a spin polarized low energy electron diffraction system

We have designed and constructed a spin polarized low energy electron diffraction system working in the reflected electron pulse counting mode. This system is capable of measuring asymmetries due to spin-orbit and exchange interactions. Photoemission from a strained GaAs/GaAsP super lattice is used as the source of spin polarized electrons. Spin-orbit asymmetry is evaluated for Ir(100) single crystal at various energies. Subsequently, exchange asymmetry has been evaluated on 40 monolayer Fe deposited on Ir(100). This instrument proves to be useful in understanding structure and magnetism at surfaces.

Concept of a multichannel spin-resolving electron analyzer based on Mott scattering

The concept of a multichannel electron spin detector based on optical imaging principles and Mott scattering (iMott) is presented. A multichannel electron image produced by a standard angle-resolving (photo) electron analyzer or microscope is re-imaged by an electrostatic lens at an accelerating voltage of 40 kV onto the Au target. Quasi-elastic electrons bearing spin asymmetry of the Mott scattering are imaged by magnetic lenses onto position-sensitive electron CCDs whose differential signals yield the multichannel spin asymmetry image. Fundamental advantages of this concept include acceptance of inherently divergent electron sources from the electron analyzer or microscope focal plane as well as small aberrations achieved by virtue of high accelerating voltages, as demonstrated by extensive ray-tracing analysis. The efficiency gain compared with the single-channel Mott detector can be a factor of more than 10(4) which opens new prospects of spin-resolved spectroscopies in application not only to standard bulk and surface systems (Rashba effect, topological insulators, etc.) but also to buried heterostructures. The simultaneous spin detection combined with fast CCD readout enables efficient use of the iMott detectors at X-ray free-electron laser facilities.

Direct observation of half-metallicity in the Heusler compound Co2MnSi

Ferromagnetic thin films of Heusler compounds are highly relevant for spintronic applications owing to their predicted half-metallicity, that is, 100% spin polarization at the Fermi energy. However, experimental evidence for this property is scarce. Here we investigate epitaxial thin films of the compound Co2MnSi in situ by ultraviolet-photoemission spectroscopy, taking advantage of a novel multi-channel spin filter. By this surface sensitive method, an exceptionally large spin polarization of (93(-11)(+7)) % at room temperature is observed directly. As a more bulk sensitive method, additional ex situ spin-integrated high energy X-ray photoemission spectroscopy experiments are performed. All experimental results are compared with advanced band structure and photoemission calculations which include surface effects. Excellent agreement is obtained with calculations, which show a highly spin polarized bulk-like surface resonance ingrained in a half metallic bulk band structure.

Rapid high-resolution spin- and angle-resolved photoemission spectroscopy with pulsed laser source and time-of-flight spectrometer

A high-efficiency spin- and angle-resolved photoemission spectroscopy (spin-ARPES) spectrometer is coupled with a laboratory-based laser for rapid high-resolution measurements. The spectrometer combines time-of-flight (TOF) energy measurements with low-energy exchange scattering spin polarimetry for high detection efficiencies. Samples are irradiated with fourth harmonic photons generated from a cavity-dumped Ti:sapphire laser that provides high photon flux in a narrow bandwidth, with a pulse timing structure ideally matched to the needs of the TOF spectrometer. The overall efficiency of the combined system results in near-E(F) spin-resolved ARPES measurements with an unprecedented combination of energy resolution and acquisition speed. This allows high-resolution spin measurements with a large number of data points spanning multiple dimensions of interest (energy, momentum, photon polarization, etc.) and thus enables experiments not otherwise possible. The system is demonstrated with spin-resolved energy and momentum mapping of the L-gap Au(111) surface states, a prototypical Rashba system. The successful integration of the spectrometer with the pulsed laser system demonstrates its potential for simultaneous spin- and time-resolved ARPES with pump-probe based measurements.

Imaging spin filter for electrons based on specular reflection from iridium (001)

As Stern-Gerlach type spin filters do not work with electrons, spin analysis of electron beams is accomplished by spin-dependent scattering processes based on spin-orbit or exchange interaction. Existing polarimeters are single-channel devices characterized by an inherently low figure of merit (FoM) of typically 10⁻⁴-10⁻³. This single-channel approach is not compatible with parallel imaging microscopes and also not with modern electron spectrometers that acquire a certain energy and angular interval simultaneously. We present a novel type of polarimeter that can transport a full image by making use of k-parallel conservation in low-energy electron diffraction. We studied specular reflection from Ir (001) because this spin-filter crystal provides a high analyzing power combined with a "lifetime" in UHV of a full day. One good working point is centered at 39 eV scattering energy with a broad maximum of 5 eV usable width. A second one at about 10 eV shows a narrower profile but much higher FoM. A relativistic layer-KKR SPLEED calculation shows good agreement with measurements.