Absolute bunch length measurement using coherent diffraction radiation

Absolute and non-invasive determination of the electron bunch length in a free electron laser using a bunch compressor monitor

In a linac driven Free Electron Laser (FEL), the shot-to-shot and non-invasive monitoring of the electron bunch length is normally ensured by Bunch Compressor Monitors (BCMs). The bunch-length dependent signal of a BCM results from the detection and integration-over a given frequency band-of the temporal coherent enhancement of the radiation spectral energy emitted by the electron beam while experiencing a longitudinal compression. In this work, we present a method that permits to express the relative variation of the bunch length as a function of the relative statistical fluctuations of the BCM and charge signals. Furthermore, in the case of a BCM equipped with two detectors simultaneously operating in two distinct wavelength bands, the method permits an absolute determination of the electron bunch length. The proposed method is beneficial to a FEL. Thanks to it, the machine compression feedback can be tuned against the absolute measurement of the bunch length rather than a bunch-length dependent signal. In a CW-superconducting-linac driven FEL, it can offer the precious opportunity to implement a fully non-invasive and absolute diagnostics of the bunch length.

Measurement of bunch length and temporal distribution using accelerating radio frequency cavity in low-emittance injector

We demonstrate an experimental methodology for measuring the temporal distribution of pico-second level electron bunch with low energy using radial electric and azimuthal magnetic fields of an accelerating (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\hbox {TM}_{01}$$\end{document}TM01 mode) radio frequency (RF) cavity that is used for accelerating electron beams in a linear accelerator. In this new technique, an accelerating RF cavity provides a phase-dependent transverse kick to the electrons, resulting in the linear coupling of the trajectory angle with the longitudinal position inside the bunch. This method does not require additional devices on the beamline since it uses an existing accelerating cavity for the projection of the temporal distribution to the transverse direction. We present the theoretical basis of the proposed method and validate it experimentally in the compact-energy recovery linac accelerator at KEK. Measurements were demonstrated using a 2-cell superconducting booster cavity with a peak on-axis accelerating field (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$E_0$$\end{document}E0) of 7.21 MV/m.

Enhancing particle bunch-length measurements based on Radio Frequency Deflector by the use of focusing elements

A method to monitor the length of a particle bunch, based on the combination of a Radio Frequency Deflector (RFD) with magnetic focusing elements, is presented. With respect to state-of-the-art bunch length measurement, the additional focusing element allows to measure also the correlations between the longitudinal and transverse planes in terms of both position and divergence. Furthermore, the quadrupole-based focusing increases the input dynamic range of the measurement system (i.e.  allows for a larger range of beam Twiss parameters at the entrance of the RFD). Thus, measurement resolution and precision are enhanced, by simultaneously preserving the accuracy. In this paper, the method is first introduced analytically, and then validated in simulation, by the reference tool ELEctron Generation ANd Tracking, ELEGANT. Finally, a preliminary experimental validation at CLEAR (CERN Linear Electron Accelerator for Research) is reported.

Measurement of pre-bunched beam's longitudinal form factor based on radiation from a tunable-gap undulator

The form factor, representing the statistical characteristics of a bunch's longitudinal distribution, is one of the most essential properties of a pre-bunched electron beam and is used for many types of frontier accelerator applications. We demonstrated the measurement of a pre-bunched beam's longitudinal form factor component based on coherent radiation from a widely tunable-gap undulator. The radiation energy from bunches with different longitudinal properties was measured as a function of undulator gap. The root-mean-square length of a 60 pC ultrashort quasi-Gaussian bunch generated by linac and chicane compression ranged from 75 fs to 240 fs, as obtained by fitting the radiation energy curve. Furthermore, the form factor component of the bunch train based on nonlinear longitudinal space charge oscillation was measured, and a higher-order harmonic component was observed with the proposed method than with the widely used coherent transition radiation method. The proposed method may satisfy the requirements of sub-fs bunch length measurement with proper undulator design.