Capillary fluctuations and film-height-dependent surface tension of an adsorbed liquid film

Surface tension of bulky colloids, capillarity under gravity, and the microscopic origin of the Kardar-Parisi-Zhang equation

Experimental measurements of the surface tension of colloidal interfaces have long been in conflict with computer simulations. In this Letter we show that the surface tension of colloids as measured by surface fluctuations picks up a gravity-dependent contribution which removes the discrepancy. The presence of this term puts a strong constraint on the structure of the interface which allows one to identify corrections to the fundamental equation of equilibrium capillarity and deduce bottom up the microscopic origin of a growth model with close relation to the Kardar-Parisi-Zhang equation.

Modification of the Fluctuation Dynamics of Ultrathin Wetting Films

We report on the effect of intermolecular forces on the fluctuations of supported liquid films. Using an optically induced thermal gradient, we form nanometer-thin films of wetting liquids on glass substrates, where van der Waals forces are balanced by thermocapillary forces. We show that the fluctuation dynamics of the film interface is strongly modified by intermolecular forces at lower frequencies. Data spanning three frequency decades are in excellent agreement with theoretical predictions accounting for van der Waals forces. Our results emphasize the relevance of intermolecular forces on thermal fluctuations when fluids are confined at the nanoscale.

Nanoscale thin-film flows with thermal fluctuations and slip

The combined effects of thermal fluctuations and liquid-solid slip on nanoscale thin-film flows are investigated using stochastic lubrication equations (SLEs). The previous no-slip SLE for films on plates is extended to consider slip effects and a new SLE for films on fibers is derived, using a long-wave approximation to fluctuating hydrodynamics. Analytically derived capillary spectra, which evolve in time, are found from the new SLEs and compared to molecular dynamics simulations. It is shown that thermal fluctuations lead to the generation and growth of surface waves, and slip accelerates this growth. SLEs developed here provide useful tools to study nanoscale film dewetting, nanofiber coating, and liquid transport using nanofibers.

Thermodynamic Stability of Volatile Droplets and Thin Films Governed by Disjoining Pressure in Open and Closed Containers

Distributed thin films of water and their coexistence with droplets are investigated using a capillary description based on a thermodynamic fundamental relation for the film Helmholtz energy, derived from disjoining pressure isotherms and an accurate equation of state. Gas-film and film-solid interfacial tensions are derived, and the latter has a dependence on film thickness. The resulting energy functionals from the capillary description are discretized, and stationary states are identified. The thermodynamic stability of configurations with thin films in systems that are closed (canonical ensemble) or connected to a particle reservoir (grand canonical ensemble) is evaluated by considering the eigenvalues of the corresponding Hessian matrices. The conventional stability criterion from the literature states that thin flat films are stable when the derivative of the disjoining pressure with respect to the film thickness is negative. This criterion is found to apply only in open systems. A closer inspection of the eigenvectors of the negative eigenvalues shows that condensation/evaporation destabilizes the film in an open system. In closed systems, thin films can be stable even though the disjoining pressure derivative is positive, and their stability is governed by mechanical instabilities of a similar kind to those responsible for spinodal dewetting in nonvolatile systems. The films are stabilized when their thickness and disjoining pressure derivative are such that the minimum unstable wavelength is larger than the container diameter. Droplets in coexistence with thin films are found to be unstable for all considered examples in open systems. In closed systems, they are found to be stable under certain conditions. The unstable droplets in both open and closed systems are saddle points in their respective energy landscapes. In the closed system, they represent the activation barrier for the transition between a stable film and a stable droplet. In the open system, the unstable droplets represent the activation barrier for the transition from a film into a bulk liquid phase. Thin films are found to be the equilibrium configuration up to a certain value of the total density in a closed system. Beyond this value, there is a morphological phase transition to stable droplet configurations.

Nanocapillarity and Liquid Bridge-Mediated Force between Colloidal Nanoparticles

In this work, we probe the concept of interface tension for ultrathin adsorbed liquid films on the nanoscale by studying the surface fluctuations of films down to the monolayer. Our results show that the spectrum of film height fluctuations of a liquid-vapor surface may be extended to ultrathin films provided we take into account the interactions of the substrate with the surface. Global fluctuations of the film height are described in terms of disjoining pressure, whereas surface deformations that are proportional to the interface area are accounted for by a film thickness-dependent surface tension. As a proof of concept, we model the capillary forces between colloidal nanoparticles held together by liquid bridges. Our results indicate that the classical equations for capillarity follow very precisely down to the nanoscale provided we account for the film height dependence of the surface tension.

Capillary wave theory of adsorbed liquid films and the structure of the liquid-vapor interface

In this paper we try to work out in detail the implications of a microscopic theory for capillary waves under the assumption that the density is given along lines normal to the interface. Within this approximation, which may be justified in terms of symmetry arguments, the Fisk-Widom scaling of the density profile holds for frozen realizations of the interface profile. Upon thermal averaging of capillary wave fluctuations, the resulting density profile yields results consistent with renormalization group calculations in the one-loop approximation. The thermal average over capillary waves may be expressed in terms of a modified convolution approximation where normals to the interface are Gaussian distributed. In the absence of an external field we show that the phenomenological density profile applied to the square-gradient free energy functional recovers the capillary wave Hamiltonian exactly. We extend the theory to the case of liquid films adsorbed on a substrate. For systems with short-range forces, we recover an effective interface Hamiltonian with a film height dependent surface tension that stems from the distortion of the liquid-vapor interface by the substrate, in agreement with the Fisher-Jin theory of short-range wetting. In the presence of long-range interactions, the surface tension picks up an explicit dependence on the external field and recovers the wave vector dependent logarithmic contribution observed by Napiorkowski and Dietrich. Using an error function for the intrinsic density profile, we obtain closed expressions for the surface tension and the interface width. We show the external field contribution to the surface tension may be given in terms of the film's disjoining pressure. From literature values of the Hamaker constant, it is found that the fluid-substrate forces may be able to double the surface tension for films in the nanometer range. The film height dependence of the surface tension described here is in full agreement with results of the capillary wave spectrum obtained recently in computer simulations, and the predicted translation mode of surface fluctuations reproduces to linear order in field strength an exact solution of the density correlation function for the Landau-Ginzburg-Wilson Hamiltonian in an external field.

Spreading law on a completely wettable spherical substrate: The energy balance approach

The spreading of a cap-shaped spherical droplet on a completely wettable spherical substrate is studied. The nonequilibrium thermodynamic formulation is used to derive the thermodynamic driving force of spreading including the line-tension effect. Then the energy balance approach is adopted to derive the evolution equation of the spreading droplet. The time evolution of the contact angle θ of a droplet obeys a power law θ∼t^{-α} with the exponent α, which is different from that derived from Tanner's law on a flat substrate. Furthermore, the line tension must be positive to promote complete wetting on a spherical substrate, while it must be negative on a flat substrate.

Wetting and evaporation of salt-water nanodroplets: A molecular dynamics investigation

We employ molecular dynamics simulations to study the wetting and evaporation of salt-water nanodroplets on platinum surfaces. Our results show that the contact angle of the droplets increases with the salt concentration. To verify this, a second simulation system of a thin salt-water film on a platinum surface is used to calculate the various surface tensions. We find that both the solid-liquid and liquid-vapor surface tensions increase with salt concentration and as a result these cause an increase in the contact angle. However, the evaporation rate of salt-water droplets decreases as the salt concentration increases, due to the hydration of salt ions. When the water molecules have all evaporated from the droplet, two forms of salt crystals are deposited, clump and ringlike, depending on the solid-liquid interaction strength and the evaporation rate. To form salt crystals in a ring, it is crucial that there is a pinned stage in the evaporation process, during which salt ions can move from the center to the rim of the droplets. With a stronger solid-liquid interaction strength, a slower evaporation rate, and a higher salt concentration, a complete salt crystal ring can be deposited on the surface.

Mesoscopic Hamiltonian for the fluctuations of adsorbed Lennard-Jones liquid films

We use Monte Carlo simulations of a Lennard-Jones fluid adsorbed on a short-range planar wall substrate to study the fluctuations in the thickness of the wetting layer, and we get a quantitative and consistent characterization of their mesoscopic Hamiltonian, H[ξ]. We have observed important finite-size effects, which were hampering the analysis of previous results obtained with smaller systems. The results presented here support an appealing simple functional form for H[ξ], close but not exactly equal to the theoretical nonlocal proposal made on the basis a generic density-functional analysis by Parry and coworkers. We have analyzed systems under different wetting conditions, as a proof of principle for a method that provides a quantitative bridge between the molecular interactions and the phenomenology of wetting films at mesoscopic scales.

Disjoining pressure and the film-height-dependent surface tension of thin liquid films: new insight from capillary wave fluctuations

In this paper we review simulation and experimental studies of thermal capillary wave fluctuations as an ideal means for probing the underlying disjoining pressure and surface tensions, and more generally, fine details of the Interfacial Hamiltonian Model. We discuss recent simulation results that reveal a film-height-dependent surface tension not accounted for in the classical Interfacial Hamiltonian Model. We show how this observation may be explained bottom-up from sound principles of statistical thermodynamics and discuss some of its implications.

Liquid-liquid phase transition and structure inheritance in carbon films

Molecular dynamics simulations are performed to study the cooling process of quasi-2D liquid carbon. Our results show an obvious liquid-liquid phase transition (LLPT) from the twofold coordinated liquid to the threefold coordinated liquid with the decrease of temperature, followed by a liquid-solid phase transition (LSPT). The LLPT can be regarded as the preparation stage of LSPT. During the cooling process, the chain structures firstly self-assemble into some ring structures and then aggregate into some stable islands which can further connect together to form a complete polycrystalline film. The threefold coordinated structures play an important role in the formation of atomic rings. The inheritance of the threefold coordinated structures provides essential condition to form rings and islands.