Defect-Assisted Hard-X-Ray Microscopy with Capillary Optics

Numerical design and characterization of a novel parallel beam combined lens based on X-ray capillary optics

A novel parallel beam combined lens (PBCL) was designed based on a parabolic monocapillary x-ray lens (PMXRL). The proposed PBCL converted a divergent X-ray beam into a near-solid parallel one, which retains the low divergence characteristics of PMXRL and significantly improves the intensity gain by about one order of magnitude. Compared with the traditional polycapillary parallel x-ray lens (PPXRL), the divergence performance of this lens is improved by an order of magnitude, and the light intensity gain is improved by 3-4 times. In addition, we developed a MATLAB-based visualization tool to simulate X-ray transmission within the PBCL through ray tracing. This tool facilitated the assessment of the PBCL's transmission efficiency and its comparison with conventional PMXRL and the PPXRL. The transport process of the PBCL is systematically investigated under the comprehensive consideration of multiple parameters. This study provided a new idea and theoretical basis for the further development of X-ray modulation technology.

Magnified x ray ghost imaging with tapered polycapillary optics free of the penumbra effect

X ray ghost imaging (XGI) offers both radiation dose-reduction potential and cost-effective benefits owing to the utilization of a single-pixel detector. Most XGI schemes with laboratory x ray sources require a mechanically moving mask for either structured illumination or structured detection. In either configuration, however, its resolution remains limited by the source size and the unit size of the mask. Upon propagation, the details of the object can actually be magnified by the divergence of x rays, but at the same time, the penumbra effect produced by the finite source size is dramatically intensified, which ultimately leads to a degradation of image quality in XGI. To address these limitations, this work proposes a magnified XGI scheme using structured detection equipped with tapered polycapillary optics, which can efficiently suppress the object's penumbra as well as resolve the magnified details of the object. In general, the resolution of this scheme is no longer affected by the source size but by the microcapillary size of polycapillary. Our work fundamentally achieves cancellation of penumbra effect-induced aberration, thus paving the way for high-resolution magnified XGI.

X-ray tomography with multiple ultranarrow cone beams

Hollow glass microcapillaries or x-ray waveguides very efficiently confine x-rays to submicron or nanospots, which can be used for point projection imaging. However, x-ray beams exiting from such devices have ultranarrow cones that are limited by the critical angle for the total external reflection to a few milliradians. Narrow cone beams result in small fields of view, and the application of multiple-reflection optics to cone beam tomography is challenging. In this work, we describe a new nonconventional tomographic geometry realized with multiple confocal ultranarrow cone beams. The geometry enables an increase in the effective radiation cone to over 10^° without resolution reduction. The proposed tomographic scans can be performed without truncations of the field of view or limitations of the angular range and do not require sample translations, which are inherent to other multibeam x-ray techniques. Volumetric imaging is possible with a simultaneous iterative reconstruction technique or with a fast approximate noniterative two-step approach. A proof-of-principle experiment was performed in the multipoint projection geometry with polycapillary optics and a multi-pinhole mask inserted upstream of the optics. The geometry is suited for phase-contrast tomography with polychromatic laboratory and synchrotron sources.

Grid-enhanced X-ray coded aperture microscopy with polycapillary optics

Polycapillary devices focus X-rays by means of multiple reflections of X-rays in arrays of bent glass capillaries. The size of the focal spot (typically 10-100 μm) limits the resolution of scanning, absorption and phase-contrast X-ray imaging using these devices. At the expense of a moderate resolution, polycapillary elements provide high intensity and are frequently used for X-ray micro-imaging with both synchrotrons and X-ray tubes. Recent studies have shown that the internal microstructure of such an optics can be used as a coded aperture that encodes high-resolution information about objects located inside the focal spot. However, further improvements to this variant of X-ray microscopy will require the challenging fabrication of tailored devices with a well-defined capillary microstructure. Here, we show that submicron coded aperture microscopy can be realized using a periodic grid that is placed at the output surface of a polycapillary optics. Grid-enhanced X-ray coded aperture microscopy with polycapillary optics does not rely on the specific microstructure of the optics but rather takes advantage only of its focusing properties. Hence, submicron X-ray imaging can be realized with standard polycapillary devices and existing set-ups for micro X-ray fluorescence spectroscopy.