Near-Field and Far-Field Thermal Emission of an Individual Patch Nanoantenna

Experimental Investigation of the Thermal Emission Cross Section of Nanoresonators Using Hierarchical Poisson-Disk Distributions

Effective cross sections of nano-objects are fundamental properties that determine their ability to interact with light. However, measuring them for individual resonators directly and quantitatively remains challenging, particularly because of the very low signals involved. Here, we experimentally measure the thermal emission cross section of metal-insulator-metal nanoresonators using a stealthy hyperuniform distribution based on a hierarchical Poisson-disk algorithm. In such distributions, there are no long-range interactions between antennas, and we show that the light emitted by such metasurfaces behaves as the sum of cross sections of independent nanoantennas, enabling direct retrieval of the single resonator contribution. The emission cross section at resonance is found to be on the order of λ_{0}^{2}/3, a value that is nearly 3 times larger than the theoretical maximal absorption cross section of a single particle, but remains smaller than the maximal extinction cross section. This measurement technique can be generalized to any single resonator cross section, and we also apply it to a lossy dielectric layer.

Detection of Strong Light-Matter Interaction in a Single Nanocavity with a Thermal Transducer

The concept of strong light-matter coupling has been demonstrated in semiconductor structures, and it is poised to revolutionize the design and implementation of components, including solid state lasers and detectors. We demonstrate an original nanospectroscopy technique that permits the study of the light-matter interaction in single subwavelength-sized nanocavities where far-field spectroscopy is not possible using conventional techniques. We inserted a thin (∼150 nm) polymer layer with negligible absorption in the mid-infrared range (5 μm < λ < 12 μm) inside a metal-insulator-metal resonant cavity, where a photonic mode and the intersubband transition of a semiconductor quantum well are strongly coupled. The intersubband transition peaks at λ = 8.3 μm, and the nanocavity is overall 270 nm thick. Acting as a nonperturbative transducer, the polymer layer introduces only a limited alteration of the optical response while allowing to reveal the optical power absorbed inside the concealed cavity. Spectroscopy of the cavity losses is enabled by the polymer thermal expansion due to heat dissipation in the active part of the cavity, and performed using atomic force microscopy (AFM). This innovative approach allows the typical anticrossing characteristic of the polaritonic dispersion to be identified in the cavity loss spectra at the single nanoresonator level. Results also suggest that near-field coupling of the external drive field to the top metal patch mediated by a metal-coated AFM probe tip is possible, and it enables the near-field mapping of the cavity mode symmetry including in the presence of a strong light-matter interaction.

Plasmonic metamaterial absorbers with strong coupling effects for small pixel infrared detectors

Here we report a metal-insulator-metal (MIM) based infrared plasmonic metamaterial absorber consisting of deep subwavelength meander line nanoantennas. High absorption composed of two-hybrid modes from 11 μm to 14 μm is experimentally demonstrated with a pixel pitch of 1.47 μm corresponding to a compression ratio of 8.57. The physical mechanisms responsible for novelty spectral absorption, including the strong coupling between the plasmon resonances and the phonon vibrations, material loss from the dielectric spacer, localized surface plasmon resonance (LSPR), and Berreman mode excited by oblique incidence, have been systematically analyzed by finite-difference time-domain (FDTD) method, Fabry-Perot resonance model and two-coupled damped oscillator model. At oblique incidence, a spectral splitting related to the strong coupling between LSPR mode and Berreman mode is also observed. The distribution of local electromagnetic fields and ohmic loss are numerically investigated. Moreover, we evaluate the absorption performances with finite-sized arrays. We also show that the absorber can maintain its absorption with a 2 × 2 nanoantenna array. Such a miniaturized absorber can adapt to infrared focal plane arrays with a pixel size smaller than 5 μm, and thermal analysis is also performed. Our approach provides an effective way to minimize the antenna footprint without undermining the absorber performances, paving the way towards its integration with small pixels of infrared focal plane arrays for enhanced performances and expanded functionalities.

Highly stable measurement for nanoparticle extinction cross section by analyzing aperture-edge blurriness

In order to stabilize the extinction cross section measurement of a single nanoparticle, we propose to analyze the blurriness parameter of aperture edge images in real time, which provides a feedback to lock the sample position. Unlike the conventional spatial modulation spectroscopy (SMS) technique, a probe beam experiences both the spatial modulation by a piezo stage and the temporal modulation by a chopper. We experimentally demonstrate that the measurement uncertainty is one order magnitude less than that in the previous report. The proposed method can be readily implemented in conventional SMS systems and can help to achieve high stability for sensing based on light extinction by a single nanoparticle, which alleviate the impact from laboratory environment and increase the experimental sensitivity.

Hybrid modes in a single thermally excited asymmetric dimer antenna

The study of hybrid modes in a single dimer of neighboring antennas is an essential step to optimize the far-field electromagnetic (EM) response of large-scale metasurfaces or any complex antenna structure made up of subwavelength building blocks. Here we present far-field infrared spatial modulation spectroscopy (IR-SMS) measurements of a single thermally excited asymmetric dimer of square metal-insulator-metal (MIM) antennas separated by a nanometric gap. Through thermal fluctuations, all the EM modes of the antennas are excited, and hybrid bonding and anti-bonding modes can be observed simultaneously. We study the latter within a plasmon hybridization model, and analyze their effect on the far-field response.

Design of Multimodal Absorption in the Mid-IR: A Metal Dielectric Metal Approach

Specific control on the mid-infrared (mid-IR) emission properties is attracting increasing attention for thermal camouflage and passive cooling applications. Metal-dielectric-metal (MDM) structures are well known to support strong magnetic polariton resonances in the optical and near-infrared range. We extend the current understanding of such an MDM structure by specifically designing Au disc arrays on top of ZnS-Au-Si substrates and pushing their resonances to the mid-IR regime. Therefore, we combine fabrication via lift-off photolithography with the finite element method and an inductance-capacitance model. With this combination of techniques, we demonstrate that the magnetic polariton resonance of the first order strongly depends on the individual disc diameter. Furthermore, the fabrication of multiple discs within one unit cell allows a linear combination of the fundamental resonances to conceive broadband absorptance. Quite importantly, even in mixed resonator cases, the absorptance spectra can be fully described by a superposition of the individual disc properties. Our contribution provides rational guidance to deterministically design mid-IR emitting materials with specific narrow- or broadband properties.

Hybrid thermal Yagi-Uda nanoantennas for directional and narrow band long-wavelength IR radiation sources

We investigate the possibility of spatially and spectrally controlling the thermal infrared emission by exploitation of the Yagi-Uda antenna design. Hybrid antennas composed of both SiC and Au rods are considered and the contributions of emission from all the elements, at a given equilibrium temperature, are taken into account. We show that the detrimental effect due to thermal emission from the not ideal parasitic elements drastically affect the performances of conventional thermal Au antennas in the 12 µm wavelength range. Nevertheless, our results show that the hybrid approach allows the development of efficient narrow-band and high directivity sources. The possibility of exploiting the Yagi-Uda design both in transmission and in reception modes, may open the way to the realization of miniaturized, efficient, robust and cheap sensor devices for mass-market applications.