Pentadiamond: A Hard Carbon Allotrope of a Pentagonal Network of sp^{2} and sp^{3} C Atoms

Thermal Transport in Pentagonal CX2 (X = N, P, As, and Sb)

Two-dimensional (2D) materials with a pentagonal structure have many unique physical properties and great potential for applications in electrical, thermal, and optical fields. In this paper, the intrinsic thermal transport properties of 2D pentagonal CX2 (X = N, P, As, and Sb) are comparatively investigated. The results show that penta-CN2 has a high thermal conductivity (302.7 W/mK), while penta-CP2, penta-CAs2, and penta-CSb2 have relatively low thermal conductivities of 60.0, 36.9, and 11.8 W/mK, respectively. The main reason for the high thermal conductivity of penta-CN2 is that the small atomic mass of the N atom is comparable to that of the C atom, resulting in a preferable pentagonal structure with stronger bonds and thus a higher phonon group velocity. The reduction in the thermal conductivity of the other three materials is mainly due to the gradually increased atomic mass from P to Sb, which reduces the phonon group velocity. In addition, the large atomic mass difference does not result in a huge enhancement of the anharmonicity or weakening of the phonon relaxation time. The present work is expected to deepen the understanding of the thermal transport of main group V 2D pentagonal carbons and pave the way for their future applications, also, providing ideas for finding potential thermal management materials.

Two dimensional monolayers TetraHex-CX2 (X = N, P, As, and Sb) with superior electronic, mechanical and optical properties

The discovery of graphene in 2004 opened a new world of two dimensional (2D) materials, stimulating the broad explorations of other novel 2D carbon structures and their derivatives in many materials fields. Although many 2D materials have been proposed theoretically, the experimental fabrication of them remains a big challenge, leading to more efforts to explore novel 2D materials with excellent properties. Here, we constructed four 2D monolayers TetraHex-CX₂ (X = N, P, As, and Sb) using first-principles calculations. These thin materials composed of tetragonal and hexagonal rings exhibit good stabilities, extraordinarily flexible mechanical properties, indirect bandgaps (≤2.30 eV except TetraHex-CN₂) with a semiconducting nature and a strong optical absorption up to 10⁵ cm^-1, showing the potential nanomechanical, nanoelectronic and optoelectronic applications. On building the structure-property relationship, we found that the Pauling electronegativity of X has an important influence on the electronic and mechanical properties of CX₂, which provides a significant understanding of the fundamental origin of materials properties and is helpful to design novel 2D materials with special properties.

Unexpected low thermal expansion coefficients of pentadiamond

A new carbon allotrope, pentadiamond, was recently reported in the literature. Herein, we investigate its thermal expansion and thermoelastic properties by first principles. It is observed that the bulk modulus and hardness of pentadiamond are far less than those of diamond, but the thermal expansion of pentadiamond is lower than that of diamond in the range of 0 K to 2000 K, and even negative in the temperature range of 0-190 K. The negative thermal expansion at low temperature originates from the transverse vibrations of the edge-shared atoms in the coplanar double-pentagon. The low thermal expansion at high temperature is contributed by the strong bonds in pentadiamond. Benefiting from the low thermal expansion, the elastic constants of pentadiamond decrease very slowly with respect to temperature compared with those of diamond. The low sensitivity of thermodynamic and thermoelastic properties to temperature makes pentadiamond a promising material for high anti-thermal-shock and accurate electronic device applications.

Exceptional Radiation Absorption in a Pentagon-Based Si Allotrope

Excellent photovoltaic performance is predicted in a pentagonal covalent network of Si in a hollow structure exhibiting both thermal and dynamical stability. Consisting of a combination of sp² and sp³ hybridized Si atomic orbitals, the GW0 computed band structure shows an indirect band gap near the zone edge and also a manifold of directly absorbing transitions at frequencies in the window of visible light, in distinction with conventional Si. Hydrogenation of a single sp² site is predicted to lead to a robust local magnetic moment. We find a low formation energy at low pressure that is compatible with other experimentally known phases, suggesting that a stable phase might be obtained.

Imidazole-graphyne: a new 2D carbon nitride with a direct bandgap and strong IR refraction

Six-membered rings are common building blocks of many carbon structures. Recent studies have shown that penta-graphene composed of five-membered carbon rings have properties very different from that of graphene. This has motivated the search for new carbon structures. Among this is cp-graphyne, composed of carbon pentagons and bridged by acetylenic linkers. However, the bandgap of cp-graphyne, like that of graphene, is zero, making it unsuitable for applications in electronics. Herein, we show that a new two-dimensional (2D) carbon nitride structure formed by assembling the five-membered imidazole molecules with acetylenic linker can overcome this limitation. Named ID-GY, this new material not only has a direct band gap of 1.10 eV, but it is dynamically and mechanically stable and can withstand temperatures up to 1200 K. In addition, due to its porous and anisotropic geometry, the Young's modulus of ID-GY along the diagonal direction is lower than that of most 2D materials reported previously. Equally important, ID-GY exhibits strong refraction near infrared (IR) and has potential for applications in nanoelectronics and optical devices. These results, based on density functional theory, can stimulate experimental studies.

Formation of Metallic Polyferrocene Chains under Pressure

The effect of pressure on the structural reorganization of ferrocene, Fc = (C₅H₅)₂Fe, is studied using density functional theory (DFT) calculations assisted by evolutionary crystal structure prediction algorithms based on USPEX code. Pressure brings the individual molecules in close contact, and above 220 GPa, the 18-electron closed-shell molecular unit undergoes polymerization through the formation of quasi-one-dimensional (1D) chains, [(C₅H₅)₂Fe]_∞, termed as polyferrocene (p-Fc). Pressure induced polymerization (PIP) of Fc causes significant deviations from the 5-fold symmetry of the cyclopentadiene (Cp, C₅H₅ rings) and loss of planarity due to the onset of envelope-like distortions. This triggers distortions within the multidecker sandwich structures and σ(C-C) bond formation between the otherwise weak noncovalently interacting Cp rings in Fc crystals. Pressure gradually reduces the band gap of Fc, and for p-Fc, metallic states are found due to increased electronic coupling between the covalently linked Cp rings. Polyferrocene is significantly more rigid than ferrocene as evident from the 5-fold increase in its bulk modulus. Pressure dependent Raman spectra show a clear onset of polymerization in Fc at P = 220 GPa. Higher mechanical strength coupled with its metallicity makes p-Fc an interesting candidate for high pressure synthesis.

Diverse Phases of Carbonaceous Materials from Stochastic Simulations

Amorphous carbon systems are emerging to have unparalleled properties at multiple length scales, making them the preferred choice for creating advanced materials in many sectors, but the lack of long-range order makes it difficult to establish structure/property relationships. We propose an original computational approach to predict the morphology of carbonaceous materials for arbitrary densities that we apply here to graphitic phases at low densities from 1.15 to 0.16 g/cm³, including glassy carbon. This approach, dynamic reactive massaging of the potential energy surface (DynReaxMas), uses the ReaxFF reactive force field in a simulation protocol that combines potential energy surface (PES) transformations with global optimization within a multidescriptor representation. DynReaxMas enables the simulation of materials synthesis at temperatures close to experiment to correctly capture the interplay of activated vs entropic processes and the resulting phase morphology. We then show that DynReaxMas efficiently and semiautomatically produces atomistic configurations that span wide relevant regions of the PES at modest computational costs. Indeed, we find a variety of distinct phases at the same density, and we illustrate the evolution of competing phases as a function of density ranging from uniform vs bimodal distributions of pore sizes at higher and intermediate density (1.15 g/cm³ and 0.50 g/cm³) to agglomerated vs sparse morphologies, further partitioned into boxed vs hollow fibrillar morphologies, at lower density (0.16 g/cm³). Our observations of diverse phases at the same density agree with experiment. Some of our identified phases provide descriptors consistent with available experimental data on local density, pore sizes, and HRTEM images, showing that DynReaxMas provides a systematic classification of the complex field of amorphous carbonaceous materials that can provide 3D structures to interpret experimental observations.