Insertion preference of maize and rice miniature inverted repeat transposable elements as revealed by the analysis of nested elements

Genome-wide analyses of miniature inverted-repeat transposable elements reveals new insights into the evolution of the Triticum-Aegilops group

The sequence drafts of wild emmer and bread wheat facilitated high resolution, genome-wide analysis of transposable elements (TEs), which account for up to 90% of the wheat genome. Despite extensive studies, the role of TEs in reshaping nascent polyploid genomes remains to be fully understood. In this study, we retrieved miniature inverted-repeat transposable elements (MITEs) from the recently published genome drafts of Triticum aestivum, Triticum turgidum ssp. dicoccoides, Aegilops tauschii and the available genome draft of Triticum urartu. Overall, 239,126 MITE insertions were retrieved, including 3,874 insertions of a newly identified, wheat-unique MITE family that we named "Inbar". The Stowaway superfamily accounts for ~80% of the retrieved MITE insertions, while Thalos is the most abundant family. MITE insertions are distributed in the seven homologous chromosomes of the wild emmer and bread wheat genomes. The remarkably high level of insertions in the B sub-genome (~59% of total retrieved MITE insertions in the wild emmer genome draft, and ~41% in the bread wheat genome draft), emphasize its highly repetitive nature. Nearly 52% of all MITE insertions were found within or close (less than 100bp) to coding genes, and ~400 MITE sequences were found in the bread wheat transcriptome, indicating that MITEs might have a strong impact on wheat genome expression. In addition, ~40% of MITE insertions were found within TE sequences, and remarkably, ~90% of Inbar insertions were located in retrotransposon sequences. Our data thus shed new light on the role of MITEs in the diversification of allopolyploid wheat species.

Contribution of transposable elements in the plant's genome

Plants maintain extensive growth flexibility under different environmental conditions, allowing them to continuously and rapidly adapt to alterations in their environment. A large portion of many plant genomes consists of transposable elements (TEs) that create new genetic variations within plant species. Different types of mutations may be created by TEs in plants. Many TEs can avoid the host's defense mechanisms and survive alterations in transposition activity, internal sequence and target site. Thus, plant genomes are expected to utilize a variety of mechanisms to tolerate TEs that are near or within genes. TEs affect the expression of not only nearby genes but also unlinked inserted genes. TEs can create new promoters, leading to novel expression patterns or alternative coding regions to generate alternate transcripts in plant species. TEs can also provide novel cis-acting regulatory elements that act as enhancers or inserts within original enhancers that are required for transcription. Thus, the regulation of plant gene expression is strongly managed by the insertion of TEs into nearby genes. TEs can also lead to chromatin modifications and thereby affect gene expression in plants. TEs are able to generate new genes and modify existing gene structures by duplicating, mobilizing and recombining gene fragments. They can also facilitate cellular functions by sharing their transposase-coding regions. Hence, TE insertions can not only act as simple mutagens but can also alter the elementary functions of the plant genome. Here, we review recent discoveries concerning the contribution of TEs to gene expression in plant genomes and discuss the different mechanisms by which TEs can affect plant gene expression and reduce host defense mechanisms.

Modular assembly of transposable element arrays by microsatellite targeting in the guayule and rice genomes

Background

Guayule (Parthenium argentatum A. Gray) is a rubber-producing desert shrub native to Mexico and the United States. Guayule represents an alternative to Hevea brasiliensis as a source for commercial natural rubber. The efficient application of modern molecular/genetic tools to guayule improvement requires characterization of its genome.

Results

The 1.6 Gb guayule genome was sequenced, assembled and annotated. The final 1.5 Gb assembly, while fragmented (N₅₀ = 22 kb), maps > 95% of the shotgun reads and is essentially complete. Approximately 40,000 transcribed, protein encoding genes were annotated on the assembly. Further characterization of this genome revealed 15 families of small, microsatellite-associated, transposable elements (TEs) with unexpected chromosomal distribution profiles. These SaTar (Satellite Targeted) elements, which are non-autonomous Mu-like elements (MULEs), were frequently observed in multimeric linear arrays of unrelated individual elements within which no individual element is interrupted by another. This uniformly non-nested TE multimer architecture has not been previously described in either eukaryotic or prokaryotic genomes. Five families of similarly distributed non-autonomous MULEs (microsatellite associated, modularly assembled) were characterized in the rice genome. Families of TEs with similar structures and distribution profiles were identified in sorghum and citrus.

Conclusion

The sequencing and assembly of the guayule genome provides a foundation for application of current crop improvement technologies to this plant. In addition, characterization of this genome revealed SaTar elements with distribution profiles unique among TEs. Satar targeting appears based on an alternative MULE recombination mechanism with the potential to impact gene evolution.

Electronic supplementary material

The online version of this article (10.1186/s12864-018-4653-6) contains supplementary material, which is available to authorized users.

Impact of Repetitive Elements on the Y Chromosome Formation in Plants

In contrast to animals, separate sexes and sex chromosomes in plants are very rare. Although the evolution of sex chromosomes has been the subject of numerous studies, the impact of repetitive sequences on sex chromosome architecture is not fully understood. New genomic approaches shed light on the role of satellites and transposable elements in the process of Y chromosome evolution. We discuss the impact of repetitive sequences on the structure and dynamics of sex chromosomes with specific focus on Rumex acetosa and Silene latifolia. Recent papers showed that both the expansion and shrinkage of the Y chromosome is influenced by sex-specific regulation of repetitive DNA spread. We present a view that the dynamics of Y chromosome formation is an interplay of genetic and epigenetic processes.

Moving through the Stressed Genome: Emerging Regulatory Roles for Transposons in Plant Stress Response

The recognition of a positive correlation between organism genome size with its transposable element (TE) content, represents a key discovery of the field of genome biology. Considerable evidence accumulated since then suggests the involvement of TEs in genome structure, evolution and function. The global genome reorganization brought about by transposon activity might play an adaptive/regulatory role in the host response to environmental challenges, reminiscent of McClintock's original 'Controlling Element' hypothesis. This regulatory aspect of TEs is also garnering support in light of the recent evidences, which project TEs as "distributed genomic control modules." According to this view, TEs are capable of actively reprogramming host genes circuits and ultimately fine-tuning the host response to specific environmental stimuli. Moreover, the stress-induced changes in epigenetic status of TE activity may allow TEs to propagate their stress responsive elements to host genes; the resulting genome fluidity can permit phenotypic plasticity and adaptation to stress. Given their predominating presence in the plant genomes, nested organization in the genic regions and potential regulatory role in stress response, TEs hold unexplored potential for crop improvement programs. This review intends to present the current information about the roles played by TEs in plant genome organization, evolution, and function and highlight the regulatory mechanisms in plant stress responses. We will also briefly discuss the connection between TE activity, host epigenetic response and phenotypic plasticity as a critical link for traversing the translational bridge from a purely basic study of TEs, to the applied field of stress adaptation and crop improvement.

Evolutionary origin of Rosaceae-specific active non-autonomous hAT elements and their contribution to gene regulation and genomic structural variation

Transposable elements account for approximately 30 % of the Prunus genome; however, their evolutionary origin and functionality remain largely unclear. In this study, we identified a hAT transposon family, termed Moshan, in Prunus. The Moshan elements consist of three types, aMoshan, tMoshan, and mMoshan. The aMoshan and tMoshan types contain intact or truncated transposase genes, respectively, while the mMoshan type is miniature inverted-repeat transposable element (MITE). The Moshan transposons are unique to Rosaceae, and the copy numbers of different Moshan types are significantly correlated. Sequence homology analysis reveals that the mMoshan MITEs are direct deletion derivatives of the tMoshan progenitors, and one kind of mMoshan containing a MuDR-derived fragment were amplified predominately in the peach genome. The mMoshan sequences contain cis-regulatory elements that can enhance gene expression up to 100-fold. The mMoshan MITEs can serve as potential sources of micro and long noncoding RNAs. Whole-genome re-sequencing analysis indicates that mMoshan elements are highly active, and an insertion into S-haplotype-specific F-box gene was reported to cause the breakdown of self-incompatibility in sour cherry. Taken together, all these results suggest that the mMoshan elements play important roles in regulating gene expression and driving genomic structural variation in Prunus.

Genome ARTIST: a robust, high-accuracy aligner tool for mapping transposon insertions and self-insertions

Background

A critical topic of insertional mutagenesis experiments performed on model organisms is mapping the hits of artificial transposons (ATs) at nucleotide level accuracy. Mapping errors may occur when sequencing artifacts or mutations as single nucleotide polymorphisms (SNPs) and small indels are present very close to the junction between a genomic sequence and a transposon inverted repeat (TIR). Another particular item of insertional mutagenesis is mapping of the transposon self-insertions and, to our best knowledge, there is no publicly available mapping tool designed to analyze such molecular events.

Results

We developed Genome ARTIST, a pairwise gapped aligner tool which works out both issues by means of an original, robust mapping strategy. Genome ARTIST is not designed to use next-generation sequencing (NGS) data but to analyze ATs insertions obtained in small to medium-scale mutagenesis experiments. Genome ARTIST employs a heuristic approach to find DNA sequence similarities and harnesses a multi-step implementation of a Smith-Waterman adapted algorithm to compute the mapping alignments. The experience is enhanced by easily customizable parameters and a user-friendly interface that describes the genomic landscape surrounding the insertion. Genome ARTIST is functional with many genomes of bacteria and eukaryotes available in Ensembl and GenBank repositories. Our tool specifically harnesses the sequence annotation data provided by FlyBase for Drosophila melanogaster (the fruit fly), which enables mapping of insertions relative to various genomic features such as natural transposons. Genome ARTIST was tested against other alignment tools using relevant query sequences derived from the D. melanogaster and Mus musculus (mouse) genomes. Real and simulated query sequences were also comparatively inquired, revealing that Genome ARTIST is a very robust solution for mapping transposon insertions.

Conclusions

Genome ARTIST is a stand-alone user-friendly application, designed for high-accuracy mapping of transposon insertions and self-insertions. The tool is also useful for routine aligning assessments like detection of SNPs or checking the specificity of primers and probes. Genome ARTIST is an open source software and is available for download at www.genomeartist.ro and at GitHub (https://github.com/genomeartist/genomeartist ).

Electronic supplementary material

The online version of this article (doi:10.1186/s13100-016-0061-0) contains supplementary material, which is available to authorized users.

Landscape and evolutionary dynamics of terminal repeat retrotransposons in miniature in plant genomes

Background

Terminal repeat retrotransposons in miniature (TRIMs) are a unique group of small long terminal repeat retrotransposons that are difficult to identify. Thus far, only a few TRIMs have been characterized in the euphyllophytes, and their evolutionary and biological significance as well as their transposition mechanisms are poorly understood.

Results

Using a combination of de novo and homology-based methods, we annotate TRIMs in 48 plant genome sequences, spanning land plants to algae. The TRIMs are grouped into 156 families including 145 that were previously undefined. Notably, we identify the first TRIMs in a lycophyte and non-vascular plants. The majority of the TRIM families are highly conserved and shared within and between plant families. Unlike other long terminal repeat retrotransposons, TRIMs are enriched in or near genes; they are also targeted by sRNAs between 21 and 24 nucleotides in length, and are frequently found in CG body-methylated genes. Importantly, we also identify putative autonomous retrotransposons and very recent transpositions of a TRIM element in Oryza sativa.

Conclusions

We perform the most comprehensive analysis of TRIM transposons thus far and report that TRIMs are ubiquitous across plant genomes. Our results show that TRIMs are more frequently associated with large and CG body-methylated genes that have undergone strong purifying selection. Our findings also indicate that TRIMs are likely derived from internal deletions of large long terminal repeat retrotransposons. Finally, our data and methodology are important resources for the characterization and evolutionary and genomic studies of long terminal repeat retrotransposons in other genomes.

Electronic supplementary material

The online version of this article (doi:10.1186/s13059-015-0867-y) contains supplementary material, which is available to authorized users.

Identification of a recently active Prunus-specific non-autonomous Mutator element with considerable genome shaping force

Miniature inverted-repeat transposable elements (MITEs) are known to contribute to the evolution of plants, but only limited information is available for MITEs in the Prunus genome. We identified a MITE that has been named Falling Stones, FaSt. All structural features (349-bp size, 82-bp terminal inverted repeats and 9-bp target site duplications) are consistent with this MITE being a putative member of the Mutator transposase superfamily. FaSt showed a preferential accumulation in the short AT-rich segments of the euchromatin region of the peach genome. DNA sequencing and pollination experiments have been performed to confirm that the nested insertion of FaSt into the S-haplotype-specific F-box gene of apricot resulted in the breakdown of self-incompatibility (SI). A bioinformatics-based survey of the known Rosaceae and other genomes and a newly designed polymerase chain reaction (PCR) assay verified the Prunoideae-specific occurrence of FaSt elements. Phylogenetic analysis suggested a recent activity of FaSt in the Prunus genome. The occurrence of a nested insertion in the apricot genome further supports the recent activity of FaSt in response to abiotic stress conditions. This study reports on a presumably active non-autonomous Mutator element in Prunus that exhibits a major indirect genome shaping force through inducing loss-of-function mutation in the SI locus.

cDNA Microarray Analysis of Rice Anther Genes under Chilling Stress at the Microsporogenesis Stage Revealed Two Genes with DNA TransposonCastawayin the 5′-Flanking Region

Rice is most chilling sensitive at the onset of microspore release. Chilling treatment at this stage causes male sterility. The gene expression profile during the microspore development process under chilling stress was revealed using a microarray that included 8,987 rice cDNAs. As many as 160 cDNAs were up- or down-regulated by chilling during the microspore release stage. RT-PCR analysis of 5 genes confirmed the microarray results. We identified 3 novel genes whose expression levels were remarkably changed by chilling in rice anther. A new cis element that includes a DNA transposon Castaway sequence was found in the 5' upstream region of two genes which were conspicuously down-regulated by chilling temperatures in rice anther.

Genomic landscape of human, bat, and ex vivo DNA transposon integrations

The integration and fixation preferences of DNA transposons, one of the major classes of eukaryotic transposable elements, have never been evaluated comprehensively on a genome-wide scale. Here, we present a detailed study of the distribution of DNA transposons in the human and bat genomes. We studied three groups of DNA transposons that integrated at different evolutionary times: 1) ancient (>40 My) and currently inactive human elements, 2) younger (<40 My) bat elements, and 3) ex vivo integrations of piggyBat and Sleeping Beauty elements in HeLa cells. Although the distribution of ex vivo elements reflected integration preferences, the distribution of human and (to a lesser extent) bat elements was also affected by selection. We used regression techniques (linear, negative binomial, and logistic regression models with multiple predictors) applied to 20-kb and 1-Mb windows to investigate how the genomic landscape in the vicinity of DNA transposons contributes to their integration and fixation. Our models indicate that genomic landscape explains 16-79% of variability in DNA transposon genome-wide distribution. Importantly, we not only confirmed previously identified predictors (e.g., DNA conformation and recombination hotspots) but also identified several novel predictors (e.g., signatures of double-strand breaks and telomere hexamer). Ex vivo integrations showed a bias toward actively transcribed regions. Older DNA transposons were located in genomic regions scarce in most conserved elements-likely reflecting purifying selection. Our study highlights how DNA transposons are integral to the evolution of bat and human genomes, and has implications for the development of DNA transposon assays for gene therapy and mutagenesis applications.

Nested insertions and accumulation of indels are negatively correlated with abundance of mutator-like transposable elements in maize and rice

Mutator-like transposable elements (MULEs) are widespread in plants and were first discovered in maize where there are a total of 12,900 MULEs. In comparison, rice, with a much smaller genome, harbors over 30,000 MULEs. Since maize and rice are close relatives, the differential amplification of MULEs raised an inquiry into the underlying mechanism. We hypothesize this is partly attributed to the differential copy number of autonomous MULEs with the potential to generate the transposase that is required for transposition. To this end, we mined the two genomes and detected 530 and 476 MULEs containing transposase sequences (candidate coding-MULEs) in maize and rice, respectively. Over 1/3 of the candidate coding-MULEs harbor nested insertions and the ratios are similar in the two genomes. Among the maize elements with nested insertions, 24% have insertions in coding regions and over half of them harbor two or more insertions. In contrast, only 12% of the rice elements have insertions in coding regions and 19% have multiple insertions, suggesting that nested insertions in maize are more disruptive. This is because most nested insertions in maize are from LTR retrotransposons, which are large in size and are prevalent in the maize genome. Our results suggest that the amplification of retrotransposons may limit the amplification of DNA transposons but not vice versa. In addition, more indels are detected among maize elements than rice elements whereas defects caused by point mutations are comparable between the two species. Taken together, more disruptive nested insertions combined with higher frequency of indels resulted in few (6%) coding-MULEs that may encode functional transposases in maize. In contrast, 35% of the coding-MULEs in rice retain putative intact transposase. This is in addition to the higher expression frequency of rice coding-MULEs, which may explain the higher occurrence of MULEs in rice than that in maize.

Organization and evolution of transposable elements along the bread wheat chromosome 3B

BACKGROUND

The 17 Gb bread wheat genome has massively expanded through the proliferation of transposable elements (TEs) and two recent rounds of polyploidization. The assembly of a 774 Mb reference sequence of wheat chromosome 3B provided us with the opportunity to explore the impact of TEs on the complex wheat genome structure and evolution at a resolution and scale not reached so far.

RESULTS

We develop an automated workflow, CLARI-TE, for TE modeling in complex genomes. We delineate precisely 56,488 intact and 196,391 fragmented TEs along the 3B pseudomolecule, accounting for 85% of the sequence, and reconstruct 30,199 nested insertions. TEs have been mostly silent for the last one million years, and the 3B chromosome has been shaped by a succession of bursts that occurred between 1 to 3 million years ago. Accelerated TE elimination in the high-recombination distal regions is a driving force towards chromosome partitioning. CACTAs overrepresented in the high-recombination distal regions are significantly associated with recently duplicated genes. In addition, we identify 140 CACTA-mediated gene capture events with 17 genes potentially created by exon shuffling and show that 19 captured genes are transcribed and under selection pressure, suggesting the important role of CACTAs in the recent wheat adaptation.

CONCLUSION

Accurate TE modeling uncovers the dynamics of TEs in a highly complex and polyploid genome. It provides novel insights into chromosome partitioning and highlights the role of CACTA transposons in the high level of gene duplication in wheat.

The contributions of transposable elements to the structure, function, and evolution of plant genomes

Transposable elements (TEs) are the key players in generating genomic novelty by a combination of the chromosome rearrangements they cause and the genes that come under their regulatory sway. Genome size, gene content, gene order, centromere function, and numerous other aspects of nuclear biology are driven by TE activity. Although the origins and attitudes of TEs have the hallmarks of selfish DNA, there are numerous cases where TE components have been co-opted by the host to create new genes or modify gene regulation. In particular, epigenetic regulation has been transformed from a process to silence invading TEs and viruses into a key strategy for regulating plant genes. Most, perhaps all, of this epigenetic regulation is derived from TE insertions near genes or TE-encoded factors that act in trans. Enormous pools of genome data and new technologies for reverse genetics will lead to a powerful new era of TE analysis in plants.

Insights into the loblolly pine genome: characterization of BAC and fosmid sequences

Despite their prevalence and importance, the genome sequences of loblolly pine, Norway spruce, and white spruce, three ecologically and economically important conifer species, are just becoming available to the research community. Following the completion of these large assemblies, annotation efforts will be undertaken to characterize the reference sequences. Accurate annotation of these ancient genomes would be aided by a comprehensive repeat library; however, few studies have generated enough sequence to fully evaluate and catalog their non-genic content. In this paper, two sets of loblolly pine genomic sequence, 103 previously assembled BACs and 90,954 newly sequenced and assembled fosmid scaffolds, were analyzed. Together, this sequence represents 280 Mbp (roughly 1% of the loblolly pine genome) and one of the most comprehensive studies of repetitive elements and genes in a gymnosperm species. A combination of homology and de novo methodologies were applied to identify both conserved and novel repeats. Similarity analysis estimated a repetitive content of 27% that included both full and partial elements. When combined with the de novo investigation, the estimate increased to almost 86%. Over 60% of the repetitive sequence consists of full or partial LTR (long terminal repeat) retrotransposons. Through de novo approaches, 6,270 novel, full-length transposable element families and 9,415 sub-families were identified. Among those 6,270 families, 82% were annotated as single-copy. Several of the novel, high-copy families are described here, with the largest, PtPiedmont, comprising 133 full-length copies. In addition to repeats, analysis of the coding region reported 23 full-length eukaryotic orthologous proteins (KOGS) and another 29 novel or orthologous genes. These discoveries, along with other genomic resources, will be used to annotate conifer genomes and address long-standing questions about gymnosperm evolution.

DcSto: carrot Stowaway-like elements are abundant, diverse, and polymorphic

We investigated nine families of Stowaway-like miniature inverted-repeat transposable elements (MITEs) in the carrot genome, named DcSto1 to DcSto9. All of them were AT-rich and shared a highly conserved 6 bp-long TIR typical for Stowaways. The copy number of DcSto1 elements was estimated as ca. 5,000 per diploid genome. We observed preference for clustered insertions of DcSto and other MITEs. Distribution of DcSto1 hybridization signals revealed presence of DcSto1 clusters within euchromatic regions along all chromosomes. An arrangement of eight regions encompassing DcSto insertion sites, studied in detail, was highly variable among plants representing different populations of Daucus carota. All of these insertions were polymorphic which most likely suggests a very recent mobilization of those elements. Insertions of DcSto near carrot genes and presence of putative promoters, regulatory motifs, and polyA signals within their sequences might suggest a possible involvement of DcSto in the regulation of gene expression.

Movement of DNA sequence recognition domains between non-orthologous proteins

Comparisons of proteins show that they evolve through the movement of domains. However, in many cases, the underlying mechanisms remain unclear. Here, we observed the movements of DNA recognition domains between non-orthologous proteins within a prokaryote genome. Restriction-modification (RM) systems, consisting of a sequence-specific DNA methyltransferase and a restriction enzyme, contribute to maintenance/evolution of genomes/epigenomes. RM systems limit horizontal gene transfer but are themselves mobile. We compared Type III RM systems in Helicobacter pylori genomes and found that target recognition domain (TRD) sequences are mobile, moving between different orthologous groups that occupy unique chromosomal locations. Sequence comparisons suggested that a likely underlying mechanism is movement through homologous recombination of similar DNA sequences that encode amino acid sequence motifs that are conserved among Type III DNA methyltransferases. Consistent with this movement, incongruence was observed between the phylogenetic trees of TRD regions and other regions in proteins. Horizontal acquisition of diverse TRD sequences was suggested by detection of homologs in other Helicobacter species and distantly related bacterial species. One of these RM systems in H. pylori was inactivated by insertion of another RM system that likely transferred from an oral bacterium. TRD movement represents a novel route for diversification of DNA-interacting proteins.

Characterization of SBEIIa homoeologous genes in bread wheat

To elucidate some of the molecular mechanisms involved in genome differentiation and evolution of cultivated wheats, we compared orthologous genes encoding starch branching enzyme IIa (SBEIIa). Bread wheat is an allohexaploid species comprising the three genomes A, B and D, each of which contributes a copy of the SBEIIa gene, involved in starch biosynthesis and known to control important quality traits related to technological and nutritional value of wheat-based food products. Alignment of the nucleotide sequences of these three genes revealed variation, both at the level of single nucleotides and indels. Multiple transposon elements were identified in the intragenic regions, some of which appear to have inserted before the divergence of the wheat diploid genomes. The B genome homoeologue was the most divergent of the three genes. Two MITE transposon insertions were detected within the intronic sequence of SBEIIa-B and two other transposons within SBEIIa-D. The presence/absence of these transposons in a panel of diploid and polyploid Triticum and Aegilops species provided some insights into the phylogeny of wheat.

A Gaijin-like miniature inverted repeat transposable element is mobilized in rice during cell differentiation

Background

Miniature inverted repeat transposable element (MITE) is one type of transposable element (TE), which is largely found in eukaryotic genomes and involved in a wide variety of biological events. However, only few MITEs were proved to be currently active and their physiological function remains largely unknown.

Results

We found that the amplicon discrepancy of a gene locus LOC_Os01g0420 in different rice cultivar genomes was resulted from the existence of a member of Gaijin-like MITEs (mGing). This result indicated that mGing transposition was occurred at this gene locus. By using a modified transposon display (TD) analysis, the active transpositions of mGing were detected in rice Jiahua No. 1 genome under three conditions: in seedlings germinated from the seeds received a high dose γ-ray irradiation, in plantlets regenerated from anther-derived calli and from scutellum-derived calli, and were confirmed by PCR validation and sequencing. Sequence analysis revealed that single nucleotide polymorphisms (SNPs) or short additional DNA sequences at transposition sites post mGing transposition. It suggested that sequence modification was possibly taken place during mGing transposition. Furthermore, cell re-differentiation experiment showed that active transpositions of both mGing and mPing (another well studied MITE) were identified only in regenerated plantlets.

Conclusions

It is for the first time that mGing active transposition was demonstrated under γ-ray irradiation or in cell re-differentiation process in rice. This newly identified active MITE will provide a foundation for further analysis of the roles of MITEs in biological process.

The predominantly selfing plant Arabidopsis thaliana experienced a recent reduction in transposable element abundance compared to its outcrossing relative Arabidopsis lyrata

Background

Transposable elements (TEs) are major contributors to genome evolution. One factor that influences their evolutionary dynamics is whether their host reproduces through selfing or through outcrossing. According to the recombinational spreading hypothesis, for instance, TEs can spread more easily in outcrossing species through recombination, and should thus be less abundant in selfing species. We here studied the distribution and evolutionary dynamics of TE families in the predominantly selfing plant Arabidopsis thaliana and its close outcrossing relative Arabidopsis lyrata on a genome-wide scale. We characterized differences in TE abundance between them and asked which, if any, existing hypotheses about TE abundances may explain these differences.

Results

We identified 1,819 TE families representing all known classes of TEs in both species, and found three times more copies in the outcrossing A. lyrata than in the predominantly selfing A. thaliana, as well as ten times more TE families unique to A. lyrata. On average, elements in A. lyrata are younger than elements in A. thaliana. In particular, A. thaliana shows a marked decrease in element number that occurred during the most recent 10% of the time interval since A. thaliana split from A. lyrata. This most recent period in the evolution of A. thaliana started approximately 500,000 years ago, assuming a splitting time of 5 million years ago, and coincides with the time at which predominant selfing originated.

Conclusions

Our results indicate that the mating system may be important for determining TE copy number, and that selfing species are likely to have fewer TEs.

Functional analysis of the HS185 regulatory element in the rice HSP70 promoter

A series of HSP70 promoter deletion constructs was established. Analysis of beta-glucuronidase activities from the promoter deletion constructs in transient expression assays identified a cis-element, located from -493 to -308 bp upstream of the ATG start site. This element was designated as HS185 and has a crucial role in HSP70 promoter activity. HS185 has some characteristics of a miniature inverted-repeat transposable element (MITE), such as terminal inverted repeats (TIRs) (GGTCCCACA) and a putative target site duplication. There are 362 copies of homologous sequences of HS185 in the rice genome, which are preferentially distributed to non-coding regions. Based on these sequence features, we propose that HS185 is an uncharacterized rice MITE, possibly derived from the rice transposon Mutator-like element VIII family. Further transient expression assays showed that HS185 inhibited the enhancer activity of the cauliflower mosaic virus 35S promoter. These results demonstrate that not only is HS185 necessary for HSP70 promoter activity, but it also has a functional role as an insulator. This study explored new regulatory functions of non-coding repeat sequences in rice.

Genome-wide comparative analysis of pogo-like transposable elements in different Fusarium species

The recent availability of genome sequences of four different Fusarium species offers the opportunity to perform extensive comparative analyses, in particular of repeated sequences. In a recent work, the overall content of such sequences in the genomes of three phylogenetically related Fusarium species, F. graminearum, F. verticillioides, and F. oxysporum f. sp. lycopersici has been estimated. In this study, we present an exhaustive characterization of pogo-like elements, named Fots, in four Fusarium genomes. Overall 10 Fot and two Fot-related miniature inverted-repeat transposable element families were identified, revealing a diversification of multiple lineages of pogo-like elements, some of which accompanied by a gain of introns. This analysis also showed that such elements are present in an unusual high proportion in the genomes of F. oxysporum f. sp. lycopersici and Nectria haematococca (anamorph F. solani f. sp. pisi) in contrast with most other fungal genomes in which retroelements are the most represented. Interestingly, our analysis showed that the most numerous Fot families all contain potentially active or mobilisable copies, thus conferring a mutagenic potential of these transposable elements and consequently a role in strain adaptation and genome evolution. This role is strongly reinforced when examining their genomic distribution which is clearly biased with a high proportion (more than 80%) located on strain- or species-specific regions enriched in genes involved in pathogenicity and/or adaptation. Finally, the different reproductive characteristics of the four Fusarium species allowed us to investigate the impact of the process of repeat-induced point mutations on the expansion and diversification of Fot elements.

Transposition of the Tourist-MITE mPing in yeast: an assay that retains key features of catalysis by the class 2 PIF/Harbinger superfamily

Background

PIF/Harbinger is the most recently discovered DNA transposon superfamily and is now known to populate genomes from fungi to plants to animals. Mobilization of superfamily members requires two separate element-encoded proteins (ORF1 and TPase). Members of this superfamily also mobilize Tourist-like miniature inverted repeat transposable elements (MITEs), which are the most abundant transposable elements associated with the genes of plants, especially the cereal grasses. The phylogenetic analysis of many plant genomes indicates that MITEs can amplify rapidly from one or a few elements to hundreds or thousands.

The most active DNA transposon identified to date in plants or animals is mPing, a rice Tourist-like MITE that is a deletion derivative of the autonomous Ping element. Ping and the closely related Pong are the only known naturally active PIF/Harbinger elements. Some rice strains accumulate ~40 new mPing insertions per plant per generation. In this study we report the development of a yeast transposition assay as a first step in deciphering the mechanism underlying the amplification of Tourist-MITEs.

Results

The ORF1 and TPase proteins encoded by Ping and Pong have been shown to mobilize mPing in rice and in transgenic Arabidopsis. Initial tests of the native proteins in a yeast assay resulted in very low transposition. Significantly higher activities were obtained by mutation of a putative nuclear export signal (NES) in the TPase that increased the amount of TPase in the nucleus. When introduced into Arabidopsis, the NES mutant protein also catalyzed higher frequencies of mPing excision from the gfp reporter gene. Our yeast assay retains key features of excision and insertion of mPing including precise excision, extended insertion sequence preference, and a requirement for two proteins that can come from either Ping or Pong or both elements.

Conclusions

The yeast transposition assay provides a robust platform for analysis of the mechanism underlying transposition catalyzed by the two proteins of PIF/Harbinger elements. It recapitulates all of the features of excision and reinsertion of mPing as seen in plant systems. Furthermore, a mutation of a putative NES in the TPase increased transposition both in yeast and plants.

Analysis of transposons and repeat composition of the sunflower (Helianthus annuus L.) genome

A sample-sequencing strategy combined with slot-blot hybridization and FISH was used to study the composition of the repetitive component of the sunflower genome. One thousand six hundred thirty-eight sequences for a total of 954,517 bp were analyzed. The fraction of sequences that can be classified as repetitive using computational and hybridization approaches amounts to 62% in total. Almost two thirds remain as yet uncharacterized in nature. Of those characterized, most belong to the gypsy superfamily of LTR-retrotransposons. Unlike in other species, where single families can account for large fractions of the genome, it appears that no transposon family has been amplified to very high levels in sunflower. All other known classes of transposable elements were also found. One family of unknown nature (contig 61) was the most repeated in the sunflower genome. The evolution of the repetitive component in the Helianthus genus and in other Asteraceae was studied by comparative analysis of the hybridization of total genomic DNAs from these species to the sunflower small-insert library and compared to gene-based phylogeny. Very little similarity is observed between Helianthus species and two related Asteraceae species outside of the genus. Most repetitive elements are similar in annual and perennial Helianthus species indicating that sequence amplification largely predates such divergence. Gypsy-like elements are more represented in the annuals than in the perennials, while copia-like elements are similarly represented, attesting a different amplification history of the two superfamilies of LTR-retrotransposons in the Helianthus genus.

Genome-wide analysis of the Fusarium oxysporum mimp family of MITEs and mobilization of both native and de novo created mimps

We have performed a genome-wide analysis of the mimp family of miniature inverted-repeat transposable elements, taking advantage of the recent release of the F. oxysporum genome sequence. Using different approaches, we detected 103 mimp elements, corresponding to 75 nonredundant copies, half of which are located on a single small chromosome. Phylogenetic analysis identified at least six subfamilies, all remarkably homogeneous in size and sequence. Based on high sequence identity in the terminal inverted repeats (TIRs), mimp elements were connected to different impala members. To gain insights into the mechanisms at the origin and amplification of mimps, we studied the potential of impala to cross-mobilize different mimps, native but also created de novo by inserting a short DNA segment between two TIRs. Our results show that TIR sequences are the main requirement for mobilization but that additional parameters in the internal region are likely to influence transposition efficiency. Finally, we show that integration site preference of native versus newly transposed mimps greatly varies in the host genomes used in this study.

DNA transposons and the evolution of eukaryotic genomes

Transposable elements are mobile genetic units that exhibit broad diversity in their structure and transposition mechanisms. Transposable elements occupy a large fraction of many eukaryotic genomes and their movement and accumulation represent a major force shaping the genes and genomes of almost all organisms. This review focuses on DNA-mediated or class 2 transposons and emphasizes how this class of elements is distinguished from other types of mobile elements in terms of their structure, amplification dynamics, and genomic effect. We provide an up-to-date outlook on the diversity and taxonomic distribution of all major types of DNA transposons in eukaryotes, including Helitrons and Mavericks. We discuss some of the evolutionary forces that influence their maintenance and diversification in various genomic environments. Finally, we highlight how the distinctive biological features of DNA transposons have contributed to shape genome architecture and led to the emergence of genetic innovations in different eukaryotic lineages.

Characterization of terminal-repeat retrotransposon in miniature (TRIM) in Brassica relatives

We have newly identified five Terminal-repeat retrotransposon in miniature (TRIM) families, four from Brassica and one from Arabidopsis. A total of 146 elements, including three Arabidopsis families reported before, are extracted from genomics data of Brassica and Arabidopsis, and these are grouped into eight distinct lineages, Br1 to Br4 derived from Brassica and At1 to At4 derived from Arabidopsis. Based on the occurrence of TRIM elements in 434 Mb of B. oleracea shotgun sequences and 96 Mb of B. rapa BAC end sequences, total number of TRIM members of Br1, Br2, Br3, and Br4 families are roughly estimated to be present in 660 and 530 copies in B. oleracea and B. rapa genomes, respectively. Studies on insertion site polymorphisms of four elements across taxa in the tribe Brassiceae infer the taxonomic lineage and dating of the insertion time. Active roles of the TRIM elements for evolution of the duplicated genes are inferred in the highly replicated Brassica genome.

Mobilization and evolutionary history of miniature inverted-repeat transposable elements (MITEs) in Beta vulgaris L

We have identified three families of miniature inverted-repeat transposable elements (VulMITEs) in the genome of sugar beet (Beta vulgaris L.), evidently derived from a member of the Vulmar family of mariner transposons. While VulMITEs I are typical stowaway-like MITEs, VulMITEs II and VulMITEs III are rearranged stowaway elements of increased size. The integration of divergent moderately and highly repetitive sequences into VulMITEs II and, in particular in VulMITEs III, respectively, shows that amplification of repetitive DNA by MITEs contribute to the increase of genome size with possible implications for plant genome evolution. Fluorescent in-situ hybridization (FISH), for the first time visualizing stowaway MITE distribution on plant chromosomes, revealed a dispersed localization of VulMITEs along all B. vulgaris chromosomes. Analysis of the flanking sequences identified a dispersed repeat as target site for the integration of the stowaway element VulMITE I. Recent transposition of VulMITE I, which most likely occurred during the domestication of cultivated beets, was concluded from insertional polymorphisms between different B. vulgaris cultivars and species.

Tuareg, a novel miniature-inverted repeat family of pearl millet (Pennisetum glaucum) related to the PIF superfamily of maize

Miniature-inverted repeat transposable elements (MITEs) are abundantly repeated in plant genomes and are especially found in genic regions where they could contribute regulatory elements for gene expression. We describe with molecular and cytological tools the first MITE family reported in pearl millet: Tuareg. It was initially detected in the pearl millet ortholog of Teosinte-branched1, an important developmental gene involved in the domestication of maize. The Tuareg family was amplified recently in the pearl millet genome and elements were found more abundant in wild than in domesticated plants. We found that they shared similarity in their terminal repeats with the previously described mPIF MITEs and that they are also present in other Pennisetum species, in maize and more distantly related grasses. The Tuareg family may be part of MITEs activated by PIF-like transposases and it could have been mobile since pearl millet domestication.

Updating of transposable element annotations from large wheat genomic sequences reveals diverse activities and gene associations

Triticeae species (including wheat, barley and rye) have huge and complex genomes due to polyploidization and a high content of transposable elements (TEs). TEs are known to play a major role in the structure and evolutionary dynamics of Triticeae genomes. During the last 5 years, substantial stretches of contiguous genomic sequence from various species of Triticeae have been generated, making it necessary to update and standardize TE annotations and nomenclature. In this study we propose standard procedures for these tasks, based on structure, nucleic acid and protein sequence homologies. We report statistical analyses of TE composition and distribution in large blocks of genomic sequences from wheat and barley. Altogether, 3.8 Mb of wheat sequence available in the databases was analyzed or re-analyzed, and compared with 1.3 Mb of re-annotated genomic sequences from barley. The wheat sequences were relatively gene-rich (one gene per 23.9 kb), although wheat gene-derived sequences represented only 7.8% (159 elements) of the total, while the remainder mainly comprised coding sequences found in TEs (54.7%, 751 elements). Class I elements [mainly long terminal repeat (LTR) retrotransposons] accounted for the major proportion of TEs, in terms of sequence length as well as element number (83.6% and 498, respectively). In addition, we show that the gene-rich sequences of wheat genome A seem to have a higher TE content than those of genomes B and D, or of barley gene-rich sequences. Moreover, among the various TE groups, MITEs were most often associated with genes: 43.1% of MITEs fell into this category. Finally, the TRIM and copia elements were shown to be the most active TEs in the wheat genome. The implications of these results for the evolution of diploid and polyploid wheat species are discussed.

Abundance, distribution and dynamics of retrotransposable elements and transposons: similarities and differences

Retrotransposable elements and transposons are generally both found in most eukaryotes. These two classes of elements are usually distinguished on the basis of their differing mechanisms of transposition. However, their respective frequencies, their intragenomic dynamics and distributions, and the frequencies of their horizontal transfer from one species to another can also differ. The main objective of this review is to compare these two types of elements from a new perspective, using data provided by genome sequencing projects and relating this to the theoretical and observed dynamics. It is shown that the traditional division into two classes, based on the transposition mechanisms, becomes less obvious when other factors are taken into consideration. A great diversity in distribution and dynamics within each class is observed. In contrast, the impact on and the interactions with the genome can show striking similarities between families of the two classes.

In-depth sequence analysis of the tomato chromosome 12 centromeric region: identification of a large CAA block and characterization of pericentromere retrotranposons

We sequenced a continuous 326-kb DNA stretch of a microscopically defined centromeric region of tomato chromosome 12. A total of 84% of the sequence (270 kb) was composed of a nested complex of repeat sequences including 27 retrotransposons, two transposable elements, three MITEs, two terminal repeat retrotransposons in miniature (TRIMs), ten unclassified repeats and three chloroplast DNA insertions. The retrotransposons were grouped into three families of Ty3-Gypsy type long terminal repeat (LTR) retrotransposons (PCRT1-PCRT3) and one LINE-like retrotransposon (PCRT4). High-resolution fluorescence in situ hybridization analyses on pachytene complements revealed that PCRT1a occurs on the pericentromere heterochromatin blocks. PCRT1 was the prevalent retrotransposon family occupying more than 60% of the 326-kb sequence with 19 members grouped into eight subfamilies (PCRT1a-PCRT1h) based on LTR sequence. The PCRT1a subfamily is a rapidly amplified element occupying tens of megabases. The other PCRT1 subfamilies (PCRT1b-PCRT1h) were highly degenerated and interrupted by insertions of other elements. The PCRT1 family shows identity with a previously identified tomato-specific repeat TGR2 and a CENP-B like sequence. A second previously described genomic repeat, TGR3, was identified as a part of the LTR sequence of an Athila-like PCRT2 element of which four copies were found in the 326-kb stretch. A large block of trinucleotide microsatellite (CAA)n occupies the centromere and large portions of the flanking pericentromere heterochromatin blocks of chromosome 12 and most of the other chromosomes. Five putative genes in the remaining 14% of the centromere region were identified, of which one is similar to a transcription regulator (ToCPL1) and a candidate jointless-2 gene.

Plant MITEs: useful tools for plant genetics and genomics

MITEs (Miniature inverted-repeat transposable elements) are reminiscence of non-autonomous DNA (class II) elements, which are distinguished from other transposable elements by their small size, short terminal inverted repeats (TIRs), high copy numbers, genic preference, and DNA sequence identity among family members. Although MITEs were first discovered in plants and still actively reshaping genomes, they have been isolated from a wide range of eukaryotic organisms. MITEs can be divided into Tourist-like, Stowaway-like, and pogo-like groups, according to similarities of their TIRs and TSDs (target site duplications). In despite of several models to explain the origin and amplification of MITEs, their mechanisms of transposition and accumulation in eukaryotic genomes remain poorly understood owing to insufficient experimental data. The unique properties of MITEs have been exploited as useful genetic tools for plant genome analysis. Utilization of MITEs as effective and informative genomic markers and potential application of MITEs in plants systematic, phylogenetic, and genetic studies are discussed.

Molecular characterization of HMW glutenin subunit allele 1Bx14: further insights in to the evolution of Glu-B1-1 alleles in wheat and related species

1Bx14 is a member of the high molecular weight (HMW) glutenin subunits specified by wheat Glu-B1-1 alleles. In this work, we found that the full-length amino acid sequence of 1Bx14 and 1Bx20, the last two of the three cysteine residues, which are conserved in 1Bx7, 1Bx17 and homologous 1Ax and 1Dx subunits, were replaced by tyrosine residues. In the 5' flanking regions (-900 to -1,200 bp relative to the start codon), a novel miniature inverted-repeat transposable element insertion was present in 1Bx12 and 1Bx20 but not 1Bx7 and 1Bx17. 1Bx14 and 1Bx20 like alleles were readily found in tetraploid wheat subspecies but not several S genome containing Aegilops species. Phylogenetic analysis showed that the four molecularly characterized Glu-B1-1 alleles (1Bx7, 1Bx14, 1Bx17, 1Bx20) could be divided into two allelic lineages. The lineage represented by 1Bx7 and 1Bx17 was more ancient than the one represented by 1Bx14 and 1Bx20. Combined, our data establish that 1Bx14 and 1Bx20 represent a novel subclass of Glu-B1-1 alleles. Based on current knowledge, potential mechanism involved in the differentiation of two Glu-B1-1 lineages is discussed.

Using rice to understand the origin and amplification of miniature inverted repeat transposable elements (MITEs)

Recent studies of rice miniature inverted repeat transposable elements (MITEs), largely fueled by the availability of genomic sequence, have provided answers to many of the outstanding questions regarding the existence of active MITEs, their source of transposases (TPases) and their chromosomal distribution. Although many questions remain about MITE origins and mode of amplification, data accumulated over the past two years have led to the formulation of testable models.

Genomic structure of the NtPDR1 gene, harboring the two miniature inverted-repeat transposable elements, NtToya1 and NtStowaway101

Here we report the genomic structure including the promoter sequence and coding region of NtPDR1 (Nicotiana tabacum Pleiotropic Drug Resistance 1), which is an elicitor-responsive gene encoding an ATP binding cassette (ABC) transporter that might be involved in the defense response in tobacco, as we reported recently. The NtPDR1 gene consists of 20 exons and 19 introns. Among the introns, the first and fifth are much larger than the others and harbor typical miniature inverted-repeat transposable elements (MITEs). One of the MITE elements in the first intron, termed NtToya1, belongs to the Toya family that was recently described in rice, while the other element in the fifth intron, termed NtStowaway101, shows high homology with the Stowaway elements of the IS630-Tc1-mariner family. Many of the genes we found to harbor Toya and Stowaway elements in Nicotiana species by BLAST search are also involved in stress responses or plant-pathogen interactions. The existence of putative cis-elements (a GCC box, three W boxes, and several JA-responsive elements) in the promoter region supports our previous finding that this gene is strongly inducible by elicitation and methyljasmonate, and that this ABC transporter might be essential for plant defense responses. Furthermore, Southern blot analysis and PCR amplification of the introns harboring the MITE-like elements from genomic DNA of three Nicotiana species suggests that NtPDR1 originated from N. sylvestris.

Plant LTR-retrotransposons and MITEs: control of transposition and impact on the evolution of plant genes and genomes

Transposons are genetic elements that can move, and sometimes spread, within genomes, and that constitute an important fraction of eukaryote genomes. Two types of transposons, long terminal repeat (LTR)-retrotransposons and miniature inverted-repeat transposable elements (MITEs), are highly represented in plant genomes, and can account for as much as 50-80% of the total DNA content. In the last few years it has been shown that, in spite of their mutagenic capacity, both LTR-retrotransposons and MITEs can be found associated to genes, suggesting that their activity has influenced the evolution of plant genes. In this review we will summarise recent data on the control of the activity and the impact of both LTR-retrotransposons and MITEs on the evolution of plant genes and genomes.

High-Cot sequence analysis of the maize genome

Higher eukaryotic genomes, including those from plants, contain large amounts of repetitive DNA that complicate genome analysis. We have developed a technique based on DNA renaturation which normalizes repetitive DNA, and thereby allows a more efficient outcome for full genome shotgun sequencing. The data indicate that sequencing the unrenatured outcome of a Cot experiment, otherwise known as High-Cot DNA, enriches genic sequences by more than fourfold in maize, from 5% for a random library to more than 20% for a High-Cot library. Using this approach, we predict that gene discovery would be greater than 95% and that the number of sequencing runs required to sequence the full gene space in maize would be at least fourfold lower than that required for full-genome shotgun sequencing.

Towards an accurate sequence of the rice genome

Several more- or less-elaborated rice genome sequences have been produced recently using different strategies. It has become possible to compare them and to unravel the major features of the rice genome in terms of nucleotide composition, repeats, gene content and variability. It has also become possible to compare the rice and Arabidopsis genomes and to evaluate rice as a model genome.

An active DNA transposon family in rice

The publication of draft sequences for the two subspecies of Oryza sativa (rice), japonica (cv. Nipponbare) and indica (cv. 93-11), provides a unique opportunity to study the dynamics of transposable elements in this important crop plant. Here we report the use of these sequences in a computational approach to identify the first active DNA transposons from rice and the first active miniature inverted-repeat transposable element (MITE) from any organism. A sequence classified as a Tourist-like MITE of 430 base pairs, called miniature Ping (mPing), was present in about 70 copies in Nipponbare and in about 14 copies in 93-11. These mPing elements, which are all nearly identical, transpose actively in an indica cell-culture line. Database searches identified a family of related transposase-encoding elements (called Pong), which also transpose actively in the same cells. Virtually all new insertions of mPing and Pong elements were into low-copy regions of the rice genome. Since the domestication of rice mPing MITEs have been amplified preferentially in cultivars adapted to environmental extremes-a situation that is reminiscent of the genomic shock theory for transposon activation.

Plant transposable elements: where genetics meets genomics

Transposable elements are the single largest component of the genetic material of most eukaryotes. The recent availability of large quantities of genomic sequence has led to a shift from the genetic characterization of single elements to genome-wide analysis of enormous transposable-element populations. Nowhere is this shift more evident than in plants, in which transposable elements were first discovered and where they are still actively reshaping genomes.