Size-exclusion chromatography small-angle X-ray scattering of water soluble proteins on a laboratory instrument

Internal multiple interactions-adsorption and external zwitterionic polymer-exclusion of restricted access materials as adsorbent for offline and online extraction of neonicotinoid pesticides in Goji samples

A method based on novel restricted access materials (RAMs) for the determination of neonicotinoid pesticides in Goji samples using offline and online solid phase extraction (SPE) coupled with high-performance liquid chromatography (LC). RAMs were synthesized using poly(chloromethylstyrene-co-divinylbenzene) (PVBC/DVB) microspheres as substrate, styrene (St) and n-vinylpyrrolidone (NVP) were first copolymerized on the interior to construct adsorption sites, and sulfobetaine methacrylate (SBMA) was then polymerized on the exterior to form exclusion sites via two-step surface initiated-atom transfer polymerization. The prepared PVBC/DVB@poly(St-co-NVP)@poly(SBMA) RAMs could efficiently extract neonicotinoid pesticides and automatically exclude proteins. Under the optimized conditions, the developed methods of offline (magnetic SPE and SPE column) and online extraction coupled with LC both using PVBC/DVB@poly(St-co-NVP)@poly(SBMA) RAMs as the extractant, exhibit a wide linearity, low limits of detection and limit of quantification and good inter-day and intra-day precision with satisfactory recoveries. Among these methods, online extraction coupled with LC based on novel RAMs exhibits clear advantages for the determination of neonicotinoid pesticides in Goji samples has clear advantages, such as simple operation by direct injection, short extraction times, and high accuracy with less human error.

Combined Effects of Pressure and Ionic Strength on Protein-Protein Interactions: An Empirical Approach

Proteins are exposed to hydrostatic pressure (HP) in a variety of ecosystems as well as in processing steps such as freeze-thaw, cell disruption, sterilization, and homogenization, yet pressure effects on protein-protein interactions (PPIs) remain underexplored. With the goal of contributing toward the expanded use of HP as a fundamental control parameter in protein research, processing, and engineering, small-angle X-ray scattering was used to examine the effects of HP and ionic strength on ovalbumin, a model protein. Based on an extensive data set, we develop an empirical method for scaling PPIs to a master curve by combining HP and osmotic effects. We define an effective pressure parameter that has been shown to successfully apply to other model protein data available in the literature, with deviations evident for proteins that do not follow the apparent Hofmeister series. The limitations of the empirical scaling are discussed in the context of the hypothesized underlying mechanisms.

Upgraded D22 SEC-SANS setup dedicated to the biology community

Described here is the current status of the upgraded in situ size-exclusion chromatography (SEC) system implemented with the D22 small-angle neutron scattering (SANS) instrument at the Institut Laue-Langevin. Since its initial proof of principle in 2016, this SEC-SANS arrangement has been continuously requested by the user community, leading to the design of an upgraded version. A detailed description of the setup and its control is provided, and a few examples of protein structural investigations are presented, which will highlight the various possibilities and limitations of the setup to optimize experimental success.

Triblock copolymer–grafted restricted access materials with zwitterionic polymer outer layers for highly efficient extraction of fluoroquinolones and exclusion of proteins

High-selectivity and high-exclusion restricted access materials (RAMs) benefit the analysis of biological samples. Herein, triblock copolymer-functionalized poly(4-vinylbenzyl chloride-co-divinylbenzene) (P_VBC/DVB) microspheres were prepared via the sequential surface-initiated atom radical polymerization of hydrophobic styrene (St), ionic vinylimidazole (VIm), and zwitterionic sulfobetaine methacrylate (SBMA), affording RAMs with multiple interaction-adsorption sites and zwitterionic polymer exclusion sites on the internal and external surfaces of P_VBC/DVB. The preferential extraction of fluoroquinolones (FQs) is realized based on the hydrophobic/π-π/ion exchange interactions due to the grafted poly-St-VIm, and the zwitterionic poly-SBMA block in the triblock copolymers can efficiently exclude various proteins. A sensitive detection method for FQs in chicken was established by solid phase extraction with RAMs as adsorbent combined with UPLC-MS/MS, achieving wide linearity (2.0-200.0 ng mL^-1), low limit of detection (0.5 μg kg^-1) and limit of quantification (1.5 μg kg^-1), and good inter- and intraday precision with satisfactory recoveries (104.1%-117.7% and 115.3%-121.2% with RSDs < 12%).

Structural insights into redox signal transduction mechanisms in the control of nitrogen fixation by the NifLA system

NifL is a conformationally dynamic flavoprotein responsible for regulating the activity of the σ54-dependent activator NifA to control the transcription of nitrogen fixation (nif) genes in response to intracellular oxygen, cellular energy, or nitrogen availability. The NifL-NifA two-component system is the master regulatory system for nitrogen fixation. NifL serves as a sensory protein, undergoing signal-dependent conformational changes that modulate its interaction with NifA, forming the NifL-NifA complex, which inhibits NifA activity in conditions unsuitable for nitrogen fixation. While NifL-NifA regulation is well understood, these conformationally flexible proteins have eluded previous attempts at structure determination. In work described here, we advance a structural model of the NifL dimer supported by a combination of scattering techniques and mass spectrometry (MS)-coupled structural analyses that report on the average structure in solution. Using a combination of small angle X-ray scattering-derived electron density maps and MS-coupled surface labeling, we investigate the conformational dynamics responsible for NifL oxygen and energy responses. Our results reveal conformational differences in the structure of NifL under reduced and oxidized conditions that provide the basis for a model for modulating NifLA complex formation in the regulation of nitrogen fixation in response to oxygen in the model diazotroph, Azotobacter vinelandii.

Derivation of the small-angle scattering profile of a target biomacromolecule from a profile deteriorated by aggregates. AUC-SAS

Aggregates cause a fatal problem in the structural analysis of a biomacro-mol-ecule in solution using small-angle X-ray or neutron scattering (SAS): they deteriorate the scattering profile of the target molecule and lead to an incorrect structure. Recently, an integrated method of analytical ultracentrifugation (AUC) and SAS, abbreviated AUC-SAS, was developed as a new approach to overcome this problem. However, the original version of AUC-SAS does not offer a correct scattering profile of the target molecule when the weight fraction of aggregates is higher than ca 10%. In this study, the obstacle point in the original AUC-SAS approach is identified. The improved AUC-SAS method is then applicable to a solution with a relatively larger weight fraction of aggregates (≤20%).

Using Small-angle X-ray Scattering to Characterize Biological Systems: A General Overview and Practical Tips

Small-angle X-ray Scattering (SAXS) is a versatile and powerful technique with applications in a wide range of fields. The continuous improvements in hardware, data analysis software, and standards for validation significantly contributed to increase its popularity and, nowadays, SAXS is a well-established method. SAXS allows to study flexible and dynamic systems (e.g., proteins and other biomolecules) in solution, providing information about their size and shape. Contrary to other structural characterization methods, SAXS has no limitations on the size of the particle under study and can be used in integrated approaches to reveal important insights otherwise difficult to obtain regarding folding-unfolding, conformational changes, movement of flexible regions, and the formation of complexes.This chapter, in addition to a concise overview on the methodology, intends to systematically enumerate the main steps involved in sample preparation and data collection, processing and analysis including useful practical notes to identify and overcome common bottlenecks. This way, a less experienced user can use the content of the chapter as a starting point to properly design and perform a successful SAXS experiment.

Hydration in Deep Eutectic Solvents Induces Non-monotonic Changes in the Conformation and Stability of Proteins

The preservation of labile biomolecules presents a major challenge in chemistry, and deep eutectic solvents (DESs) have emerged as suitable environments for this purpose. However, how the hydration of DESs impacts the behavior of proteins is often neglected. Here, we demonstrate that the amino acid environment and secondary structure of two proteins (bovine serum albumin and lysozyme) and an antibody (immunoglobulin G) in 1:2 choline chloride:glycerol and 1:2 choline chloride:urea follow a re-entrant behavior with solvent hydration. A dome-shaped transition is observed with a folded or partially folded structure at very low (<10 wt % H₂O) and high (>40 wt % H₂O) DES hydration, while protein unfolding increases between those regimes. Hydration also affects protein conformation and stability, as demonstrated for bovine serum albumin in hydrated 1:2 choline chloride:glycerol. In the neat DES, bovine serum albumin remains partially folded and unexpectedly undergoes unfolding and oligomerization at low water content. At intermediate hydration, the protein begins to refold and gradually retrieves the native monomer-dimer equilibrium. However, ca. 36 wt % H₂O is required to recover the native folding fully. The half-denaturation temperature of the protein increases with decreasing hydration, but even the dilute DESs significantly enhance the thermal stability of bovine serum albumin. Also, protein unfolding can be reversed by rehydrating the sample to the high hydration regime, also recovering protein function. This correlation provides a new perspective to understanding protein behavior in hydrated DESs, where quantifying the DES hydration becomes imperative to identifying the folding and stability of proteins.

Inline small-angle X-ray scattering-coupled chromatography under extreme hydrostatic pressure

As continuing discoveries highlight the surprising abundance and resilience of deep ocean and subsurface microbial life, the effects of extreme hydrostatic pressure on biological structure and function have attracted renewed interest. Biological small-angle X-ray scattering (BioSAXS) is a widely used method of obtaining structural information from biomolecules in solution under a wide range of solution conditions. Due to its ability to reduce radiation damage, remove aggregates, and separate monodisperse components from complex mixtures, size-exclusion chromatography-coupled SAXS (SEC-SAXS) is now the dominant form of BioSAXS at many synchrotron beamlines. While BioSAXS can currently be performed with some difficulty under pressure with non-flowing samples, it has not been clear how, or even if, continuously flowing SEC-SAXS, with its fragile media-packed columns, might work in an extreme high-pressure environment. Here we show, for the first time, that reproducible chromatographic separations coupled directly to high-pressure BioSAXS can be achieved at pressures up to at least 100 MPa and that pressure-induced changes in folding and oligomeric state and other properties can be observed. The apparatus described here functions at a range of temperatures (0°C-50°C), expanding opportunities for understanding biomolecular rules of life in deep ocean and subsurface environments.

Recent advances in structural characterization of biomacromolecules in foods via small-angle X-ray scattering

Small-angle X-ray scattering (SAXS) is a method for examining the solution structure, oligomeric state, conformational changes, and flexibility of biomacromolecules at a scale ranging from a few Angstroms to hundreds of nanometers. Wide time scales ranging from real time (milliseconds) to minutes can be also covered by SAXS. With many advantages, SAXS has been extensively used, it is widely used in the structural characterization of biomacromolecules in food science and technology. However, the application of SAXS in charactering the structure of food biomacromolecules has not been reviewed so far. In the current review, the principle, theoretical calculations and modeling programs are summarized, technical advances in the experimental setups and corresponding applications of in situ capabilities: combination of chromatography, time-resolved, temperature, pressure, flow-through are elaborated. Recent applications of SAXS for monitoring structural properties of biomacromolecules in food including protein, carbohydrate and lipid are also highlighted, and limitations and prospects for developing SAXS based on facility upgraded and artificial intelligence to study the structural properties of biomacromolecules are finally discussed. Future research should focus on extending machine time, simplifying SAXS data treatment, optimizing modeling methods in order to achieve an integrated structural biology based on SAXS as a practical tool for investigating the structure-function relationship of biomacromolecules in food industry.

A comparative study of unpasteurized and pasteurized frozen whole hen eggs using size-exclusion chromatography and small-angle X-ray scattering

Hen eggs are rich in proteins and are an important source of protein for humans. Pasteurized frozen whole hen eggs are widely used in cooking and confectionery and can be stored for long periods. However, processed eggs differ from raw eggs in properties such as viscosity, foaming ability, and thermal aggregation. To develop pasteurized frozen whole egg products with properties similar to those of unpasteurized whole eggs, it is necessary to establish a method that can differentiate between the two egg types with respect to the structures of their proteins. In this study, size-exclusion chromatography (SEC) and SEC coupled with small-angle X-ray scattering (SEC-SAXS) were successfully used to differentiate between the proteins in unpasteurized and pasteurized frozen whole eggs. We found that proteins in the plasma fraction of egg yolk, especially apovitellenins I and II, formed large aggregates in the pasteurized eggs, indicating that their structures are sensitive to temperature changes during pasteurization, freezing, and thawing. The results suggest that SEC and SEC-SAXS can be used to differentiate between unpasteurized and pasteurized frozen whole eggs. Additionally, they may be useful in determining molecular sizes and shapes of multiple components in various complex biological systems such as whole eggs.

Global fitting of multiple data frames from SEC–SAXS to investigate the structure of next-generation nanodiscs

The combination of online size-exclusion chromatography and small-angle X-ray scattering (SEC–SAXS) is rapidly becoming a key technique for structural investigations of elaborate biophysical samples in solution. Here, a novel model-refinement strategy centred around the technique is outlined and its utility is demonstrated by analysing data series from several SEC–SAXS experiments on phospholipid bilayer nanodiscs. Using this method, a single model was globally refined against many frames from the same data series, thereby capturing the frame-to-frame tendencies of the irradiated sample. These are compared with models refined in the traditional manner, in which refinement is based on the average profile of a set of consecutive frames from the same data series without an in-depth comparison of individual frames. This is considered to be an attractive model-refinement scheme as it considerably lowers the total number of parameters refined from the data series, produces tendencies that are automatically consistent between frames, and utilizes a considerably larger portion of the recorded data than is often performed in such experiments. Additionally, a method is outlined for correcting a measured UV absorption signal by accounting for potential peak broadening by the experimental setup.

Recent advances in small-angle scattering and its expanding impact in structural biology

Applications of small-angle scattering (SAS) in structural biology have benefited from continuing developments in instrumentation, tools for data analysis, modeling capabilities, standards for data and model presentation, and data archiving. The interplay of these capabilities has enabled SAS to contribute to advances in structural biology as the field pushes the boundaries in studies of biomolecular complexes and assemblies as large as whole cells, membrane proteins in lipid environments, and dynamic systems on time scales ranging from femtoseconds to hours. This review covers some of the important advances in biomolecular SAS capabilities for structural biology focused on over the last 5 years and presents highlights of recent applications that demonstrate how the technique is exploring new territories.

Small-angle X-ray scattering for the proteomics community: current overview and future potential

Introduction: Proteins are biological nanoparticles. For structural proteomics and hybrid structural biology, complementary methods are required that allow both high throughput and accurate automated data analysis. Small-angle X-ray scattering (SAXS) is a method for observing the size and shape of particles, such as proteins and complexes, in solution. SAXS data can be used to model both the structure, oligomeric state, conformational changes, and flexibility of biomolecular samples.Areas covered: The key principles of SAXS, its sample requirements, and its current and future applications for structural proteomics are briefly reviewed. Recent technical developments in SAXS experiments are discussed, and future potential of the method in structural proteomics is evaluated.Expert opinion: SAXS is a method suitable for several aspects of integrative structural proteomics, with current technical developments allowing for higher throughput and time-resolved studies, as well as the analysis of complex samples, such as membrane proteins. Increasing automation and streamlined data analysis are expected to equip SAXS for structure-based screening workflows. Originally, structural genomics had a heavy focus on folded, crystallizable proteins and complexes - SAXS is a method allowing an expansion of this focus to flexible and disordered systems.

ATSAS 3.0: expanded functionality and new tools for small-angle scattering data analysis

The ATSAS software suite encompasses a number of programs for the processing, visualization, analysis and modelling of small-angle scattering data, with a focus on the data measured from biological macromolecules. Here, new developments in the ATSAS 3.0 package are described. They include IMSIM, for simulating isotropic 2D scattering patterns; IMOP, to perform operations on 2D images and masks; DATRESAMPLE, a method for variance estimation of structural invariants through parametric resampling; DATFT, which computes the pair distance distribution function by a direct Fourier transform of the scattering data; PDDFFIT, to compute the scattering data from a pair distance distribution function, allowing comparison with the experimental data; a new module in DATMW for Bayesian consensus-based concentration-independent molecular weight estimation; DATMIF, an ab initio shape analysis method that optimizes the search model directly against the scattering data; DAMEMB, an application to set up the initial search volume for multiphase modelling of membrane proteins; ELLLIP, to perform quasi-atomistic modelling of liposomes with elliptical shapes; NMATOR, which models conformational changes in nucleic acid structures through normal mode analysis in torsion angle space; DAMMIX, which reconstructs the shape of an unknown intermediate in an evolving system; and LIPMIX and BILMIX, for modelling multilamellar and asymmetric lipid vesicles, respectively. In addition, technical updates were deployed to facilitate maintainability of the package, which include porting the PRIMUS graphical interface to Qt5, updating SASpy - a PyMOL plugin to run a subset of ATSAS tools - to be both Python 2 and 3 compatible, and adding utilities to facilitate mmCIF compatibility in future ATSAS releases. All these features are implemented in ATSAS 3.0, freely available for academic users at https://www.embl-hamburg.de/biosaxs/software.html.

A high-flux automated laboratory small-angle X-ray scattering instrument optimized for solution scattering

A commercially available small-angle X-ray scattering (SAXS) NanoSTAR instrument (Bruker AXS) with a liquid-metal-jet source (Excillum) has been optimized for solution scattering and installed at iNANO at Aarhus University. The instrument (named HyperSAXS) employs long high-quality parabolic Montel multilayer optics (Incoatec) and a novel compact scatterless pinhole slit with Ge edges, which was designed and built at Aarhus University. The combination of the powerful source and optimized geometry gives an integrated X-ray intensity close to 109 photons s−1 for a standard range of scattering vector moduli q = 0.0098–0.425 Å−1, where q = (4πsinθ)/λ and λ is the Ga Kα wavelength of 1.34 Å. The high intensity of the instrument makes it possible to measure dilute samples of, for example, protein or surfactant with concentrations of 1 mg ml−1 in a few minutes. A flow-through cell, built at Aarhus University, in combination with an automated sample handler has been installed on the instrument. The sample handler is based on the commercial Gilson GX-271 injection system (Biolab), which also allows samples to be stored under thermostatted conditions. The sample handler inserts and removes samples, and also cleans and dries the sample cell between measurements. The minimum volume of the flow-through capillary is about 20 µl. The high intensity additionally allows time-resolved measurements to be performed with a temporal resolution of seconds. For this purpose a stopped-flow apparatus, (SFM-3000, Bio-Logic) was connected to the flow-through cell by high-performance liquid chromatography tubing. This configuration was chosen as it allows vacuum around the sample cell and thus maintains a low background. The instrument can readily be converted into a low-q setup with a q range of 0.0049–0.34 Å−1 and an X-ray intensity of about 5 × 107 photons s−1.

Adding Size Exclusion Chromatography (SEC) and Light Scattering (LS) Devices to Obtain High-Quality Small Angle X-Ray Scattering (SAXS) Data

We describe the updated size-exclusion chromatography small angle X-ray scattering (SEC-SAXS) set-up used at the P12 bioSAXS beam line of the European Molecular Biology Laboratory (EMBL) at the PETRAIII synchrotron, DESY Hamburg (Germany). The addition of size exclusion chromatography (SEC) directly on-line to the SAXS capillary has become a well-established approach to reduce the effects of the sample heterogeneity on the SAXS measurements. The additional use of multi-angle laser light scattering (MALLS), UV absorption spectroscopy, refractive index (RI), and quasi-elastic light scattering (QELS) in parallel to the SAXS measurements enables independent molecular weight validation and hydrodynamic radius estimates. This allows one to address sample monodispersity as well as conformational heterogeneity. The benefits of the current SEC-SAXS set-up are demonstrated on a set of selected standard proteins. The processed SEC-SAXS data and models are provided in the Small Angle Scattering Biological Data Bank (SASBDB) and are labeled as “bench-marked” datasets that include the unsubtracted data frames spanning the respective SEC elution profiles and corresponding MALLS-UV-RI-QELS data. These entries provide method developers with datasets suitable for testing purposes, in addition to an educational resource for SAS data analysis and modeling.

Assessment of structure factors for analysis of small-angle scattering data from desired or undesired aggregates

Aggregation processes are central features of many systems ranging from colloids and polymers to inorganic nanoparticles and biological systems. Some aggregated structures are controlled and desirable, e.g. in the design of size-controlled clustered nanoparticles or some protein-based drugs. In other cases, the aggregates are undesirable, e.g. protein aggregation involved in neurodegenerative diseases or in vitro studies of single protein structures. In either case, experimental and analytical tools are needed to cast light on the aggregation processes. Aggregation processes can be studied with small-angle scattering, but analytical descriptions of the aggregates are needed for detailed structural analysis. This paper presents a list of useful small-angle scattering structure factors, including a novel structure factor for a spherical cluster with local correlations between the constituent particles. Several of the structure factors were renormalized to get correct limit values in both the high-q and low-q limit, where q is the modulus of the scattering vector. The structure factors were critically evaluated against simulated data. Structure factors describing fractal aggregates provided approximate descriptions of the simulated data for all tested structures, from linear to globular aggregates. The addition of a correlation hole for the constituent particles in the fractal structure factors significantly improved the fits in all cases. Linear aggregates were best described by a linear structure factor and globular aggregates by the newly derived spherical cluster structure factor. As a central point, it is shown that the structure factors could be used to take aggregation contributions into account for samples of monomeric protein containing a minor fraction of aggregated protein. After applying structure factors in the analysis, the correct structure and oligomeric state of the protein were determined. Thus, by careful use of the presented structure factors, important structural information can be retrieved from small-angle scattering data, both when aggregates are desired and when they are undesired.

Structural Modeling Using Solution Small-Angle X-ray Scattering (SAXS)

Small-angle X-ray scattering (SAXS) offers a way to examine the overall shape and oligomerization state of biological macromolecules under quasi native conditions in solution. In the past decades, SAXS has become a standard tool for structure biologists due to the availability of high brilliance X-ray sources and the development of data analysis/interpretation methods. Sample handling robots and software pipelines have significantly reduced the time necessary to conduct SAXS experiments. Presently, most synchrotrons feature beamlines dedicated to biological SAXS, and the SAXS-derived models are deposited into dedicated and accessible databases. The size of macromolecules that may be analyzed ranges from small peptides or snippets of nucleic acids to gigadalton large complexes or even entire viruses. Compared to other structural methods, sample preparation is straightforward, and the risk of inducing preparation artefacts is minimal. Very importantly, SAXS is a method of choice to study flexible systems like unfolded or disordered proteins, providing the structural ensembles compatible with the data. Although it may be utilized stand-alone, SAXS profits a lot from available experimental or predicted high-resolution data and information from complementary biophysical methods. Here, we show the basic principles of SAXS and review latest developments in the fields of hybrid modeling and flexible systems.

Structural Analyses of Intrinsically Disordered Proteins by Small-Angle X-Ray Scattering

Small-angle X-ray scattering (SAXS) is a low-resolution method for the structural characterization of biological macromolecules in solution. Information about the overall structural features provided by SAXS is highly complementary to X-ray crystallography, nuclear magnetic resonance (NMR) spectroscopy, and cryo-electron microscopy, which are high-resolution methods. SAXS not only provides the shape, oligomeric state, and quaternary structure of folded proteins and protein complexes but also allows for quantitative analysis of flexible biomolecules. In this chapter, the most relevant SAXS procedures for structural characterization of flexible macromolecules, including intrinsically disordered proteins (IDPs), are presented. The sample requirements for SAXS experiments on protein solutions and the sequence of steps in data collection and processing are described. The use of the advanced data analysis tools to quantitatively characterize flexible proteins is presented in detail. Typical experimental issues and potential problems encountered during SAXS data measurements and analyses are discussed.

Newly developed Laboratory-based Size exclusion chromatography Small-angle x-ray scattering System (La-SSS)

To understand a biological system, it is important to observe structures of biomolecules in the solution where the system is functionalized. Small-Angle X-ray Scattering coupled with Size Exclusion Chromatography (SEC-SAXS) is one of techniques to selectively observe the target molecules in the multi-component system. However, this technique is believed to be available only with a synchrotron-based SAXS instrument due to requirement of high beam intensity and, therefore, the limitation of the beam time was obstacle to satisfy demands from many bio-researchers. We newly developed Laboratory-based Size exclusion chromatography SAXS System (La-SSS) by utilizing a latest laboratory-based SAXS instrument and finely optimization of the balance between flow rate, cell volume, irradiation time and so on. La-SSS succeeded not only decoupling of target protein(s) from non-specific aggregates but also measurement of each concerned component in a multi-component system. In addition, an option: "stopping mode", which is designed for improving statistics of SAXS profile, realized a high S/N data acquisition for the most interesting protein in a multi-component system. Furthermore, by utilizing a column having small bed volume, the small-scale SEC-SAXS study makes available. Through optimization of instrumental parameters and environments, La-SSS is highly applicable for experimental requirements from various biological samples. It is strongly expected that a La-SSS concept must be a normal option for laboratory-based SAXS in the near future.