General method to calculate the elastic deformation and X-ray diffraction properties of bent crystal wafers

Laboratory-based X-ray spectrometer for actinide science

X-ray absorption and emission spectroscopies nowadays are advanced characterization methods for fundamental and applied actinide research. One of the advantages of these methods is to reveal slight changes in the structural and electronic properties of radionuclides. The experiments are generally carried out at synchrotrons. However, considerable progress has been made to construct laboratory-based X-ray spectrometers for X-ray absorption and emission spectroscopies. Laboratory spectrometers are reliable, effective and accessible alternatives to synchrotrons, especially for actinide research, which allow dispensing with high costs of the radioactive sample transport and synchrotron time. Moreover, data from laboratory spectrometers, obtained within a reasonable time, are comparable with synchrotron results. Thereby, laboratory spectrometers can complement synchrotrons or can be used for preliminary experiments to find perspective samples for synchrotron experiments with better resolution. Here, the construction and implementation of an X-ray spectrometer (LomonosovXAS) in Johann-geometry at a radiochemistry laboratory is reported. Examples are given of the application of LomonosovXAS to actinide systems relevant to the chemistry of f-elements, the physical chemistry of nuclear power engineering and the long-term disposal of spent nuclear fuel.

A compact von Hámos spectrometer for parallel X-ray Raman scattering and X-ray emission spectroscopy at ID20 of the European Synchrotron Radiation Facility

A compact spectrometer for medium-resolution resonant and non-resonant X-ray emission spectroscopy in von Hámos geometry is described. The main motivation for the design and construction of the spectrometer is to allow for acquisition of non-resonant X-ray emission spectra while measuring non-resonant X-ray Raman scattering spectra at beamline ID20 of the European Synchrotron Radiation Facility. Technical details are provided and the performance and possible use of the spectrometer are demonstrated by presenting results of several X-ray spectroscopic methods on various compounds.

Crystal response measurement of the x-ray transmission crystals used by the Imaging Spectroscopy Snout at the National Ignition Facility

The Imaging Spectroscopy Snout (ISS) used at the National Ignition Facility is able to simultaneously collect neutron pinhole images, 1D spatially resolved x-ray spectra, and time resolved x-ray pinhole images. To measure the x-ray spectra, the ISS can be equipped with up to four different transmission crystals, each offering different energy ranges from ∼7.5 to ∼12 keV and different resolutions. Characterizing and calibrating such instruments is of paramount importance in order to extract meaningful results from experiments. More specifically, we characterized different ISS transmission-type alpha-Quartz crystals by measuring their responses as a function of photon energy, from which we inferred the angle-integrated reflectivity for each crystal's working reflections. These measurements were made at the Lawrence Livermore National Laboratory calibration station dedicated to the characterization of x-ray spectrometers. The sources used covered a wide x-ray range-from a few to 30 keV; the source diameter was ∼0.6 mm. The experimental results are discussed alongside theoretical calculations using the pyTTE model.

X-ray Raman Scattering: A Hard X-ray Probe of Complex Organic Systems

This paper provides a review of the characterization of organic systems via X-ray Raman scattering (XRS) and a step-by-step guidance for its application. We present the fundamentals of XRS required to use the technique and discuss the main parameters of the experimental set-ups to optimize spectral and spatial resolution while maximizing signal-to-background ratio. We review applications that target the analysis of mixtures of organic compounds, the identification of minor spectral features, and the spatial discrimination in heterogeneous systems. We discuss the recent development of the direct tomography technique, which utilizes the XRS process as a contrast mechanism for assessing the three-dimensional spatially resolved carbon chemistry of complex organic materials. We conclude by exposing the current limitations and provide an outlook on how to overcome some of the existing challenges and advance future developments and applications of this powerful technique for complex organic systems.

Evolution of laser-induced strain in a Ge crystal for the [111] and [100] directions probed by time-resolved X-ray diffraction

Ultra-short laser-pulse-induced strain propagation in a Ge crystal is studied in the [111] and [100] directions using time-resolved X-ray diffraction (TXRD). The strain propagation velocity is derived by analysis of the TXRD signal from the strained crystal planes. Numerical integration of the Takagi–Taupin equations is performed using open source code, which provides a very simple approach to estimate the strain propagation velocity. The present method will be particularly useful for relatively broad spectral bandwidths and weak X-ray sources, where temporal oscillations in the diffracted X-ray intensity at the relevant phonon frequencies would not be visible. The two Bragg reflections of the Ge sample, viz. 111 and 400, give information on the propagation of strain for two different depths, as the X-ray extinction depths are different for these two reflections. The strain induced by femtosecond laser excitation has a propagation velocity comparable to the longitudinal acoustic velocity. The strain propagation velocity increases with increasing laser excitation fluence. This fluence dependence of the strain propagation velocity can be attributed to crystal heating by ambipolar carrier diffusion. Ge is a promising candidate for silicon-based optoelectronics, and this study will enhance the understanding of heat transport by carrier diffusion in Ge induced by ultra-fast laser pulses, which will assist in the design of optoelectronic devices.

Understanding the elastic bending mechanism in a 9,10-anthraquinone crystal through thermal expansion study

Thermal expansion study has been used to understand the mechanism of elastic bending in 9,10-anthraquinone. Expansion along the bending axis due to bending is expected to resemble the thermal expansion along the same direction.