Correction factor for low-loss 180 degrees reflecting linear chirp arrays in SAW devices

Narrow electrodes on YZ-LiNbOO3 as an alternative to etched grooves for dispersive delay lines

Narrow, open-circuited aluminum electrodes can provide controllable, weak reflectivity necessary for many applications such as surface acoustic wave (SAW) tags and dispersive delay lines (DDLs). We show, using finiteand boundary element method (FEM-BEM) based simulations and experiments, that a reflectivity of 0.3% per wavelength can be achieved easily and controlled by varying the electrode width.

Correction factor for strongly reflecting U-path RACs

An equation from the literature describing multiple reflections in a U-path surface-acoustic-wave (SAW) reflective array compressor (RAC) is simplified for RACs with a large time-bandwidth product, yielding a very convenient expression consisting of the relation for weakly reflecting RACs plus phase and amplitude correction factors. The quantitative effect of multiple reflections is immediately apparent, so that the designer has a better understanding of how various parameters affect the final performance. A down-chirp, which is more common in practical devices, is described. Empirical extensions to higher-order and variable weighing are deduced and verified numerically, while the possibility of variable chirp is discussed.

The power reflected in a SAW RAC

Considerations relating to the design of surface-acoustic-wave (SAW) reflective array pulse compressors (RACS), including the effect of array width on power reflected, the transmitted beam profile and the effect of randomized arrays, are discussed. Only a first-order analysis is used. Potential misunderstandings of these issues that could arise from the existing literature are clarified.

Phase correction of SAW ILRACs and RACs using Langmuir-Blodgett films

A novel method of adjusting surface-acoustic-wave (SAW) velocity in reflective array pulse compressors (RACs), including in-line devices (ILRACs) and hence correcting fabrication errors, is described. The velocity change is effected by depositing Langmuir-Blodgett films (LBFs) on the surface of the device. An accurate, stepped thickness profile can be created, enabling position-dependent velocity errors to be corrected. Experimental results for the velocity perturbation per LBF layer are first given together with data on temperature, humidity and age dependence. This is followed by the theory required to calculate the necessary thickness profile, including retrofitting to existing devices and allowing for the limitation to positive integer numbers of layers. Finally, experimental results are presented. In one device, simulated compressed pulse sidelobe levels are reduced by 19 dB.