An RF device for effective thermal treatment of atherosclerosis

A New Conformal Penetrating Heating Strategy for Atherosclerotic Plaque

(1) Background: A combination of radiofrequency (RF) volumetric heating and convection cooling has been proposed to realize plaque ablation while protecting the endothelial layer. However, the depth of the plaque and the thickness of the endothelial layer vary in different atherosclerotic lesions. Current techniques cannot be used to achieve penetrating heating for atherosclerosis with two targets (the specified protection depth and the ablation depth). (2) Methods: A tissue-mimicking phantom heating experiment simulating atherosclerotic plaque ablation was conducted to investigate the effects of the control parameters, the target temperature (T_target), the cooling water temperature (T_f), and the cooling water velocity (V_f). To further quantitatively analyze and evaluate the ablation depth and the protection depth of the control parameters, a three-dimensional model was established. In addition, a conformal penetrating heating strategy was proposed based on the numerical results. (3) Results: It was found that T_target and T_f were factors that regulated the ablation results, and the temperatures of the plaques varied linearly with T_target or T_f. The simulation results showed that the ablation depth increased with the T_target while the protection depth decreased correspondently. This relationship reversed with the T_f. When the two parameters T_target and T_fwere controlled together, the ablation depth was 0.47 mm-1.43 mm and the protection depth was 0 mm-0.26 mm within 2 min of heating. (4) Conclusions: With the proposed control algorithm, the requirements of both the ablation depth and the endothelium protection depth can be met for most plaques through the simultaneous control of T_target and T_f.

A new radiofrequency balloon angioplasty device for atherosclerosis treatment

Background

Restenosis remains a challenge in the treatment of atherosclerosis due to damage to the endothelial layer and induced proliferation of smooth muscle cells. A novel radiofrequency (RF) heating strategy was proposed to selectively ablate atherosclerosis plaque and to thermally inhibit the proliferation of smooth muscle cells while keeping the endothelial cells intact.

Methods

To realize the proposed strategy, a new radiofrequency balloon catheter, consisting of three ports, a three-channel tube, a balloon and an electrode patch, was designed. To evaluate the feasibility of this new design, a phantom experiment with thermocouples measuring temperatures with different voltages applied to the electrodes was conducted. A numerical model was established to obtain the 3D temperature distribution. The heating ability was also evaluated in ex vivo diseased artery samples.

Results

The experimental results showed that the highest temperature could be achieved in a distance from the surface of the balloon as designed. The temperature differences between the highest temperature at 0.78 mm and those of the surface reached 9.87 °C, 12.55 °C and 16.00 °C under applied 15 V, 17.5 V and 20 V heating, respectively. In the circumferential direction, the heating region (above 50 °C) spread from the middle of the two electrodes. The numerical results showed that the cooling effect counteracted the electrical energy deposition in the region close to the electrodes. The thermal lesion could be directed to cover the diseased media away from the catheter surface. The ex vivo heating experiment also confirmed the selective heating ability of the device. The temperature at the targeted site quickly reached the set value. The temperature of the external surface was higher than the inner wall surface temperature of the diseased artery lumen.

Conclusion

Both the experimental and numerical results demonstrated the feasibility of the newly designed RF balloon catheter. The proposed RF microelectrodes heating together with the cooling water convection can realize the desired heating in the deeper site of the blood vessel wall while sparing the thin layer of the endothelium.