A Practical Approach for Evaluation of Socket Pistoning for Lower Limb Amputees

3D Motion Analysis for the Assessment of Dynamic Coupling in Transtibial Prosthetics: A Proof of Concept

Assessment of coupling between transtibial sockets and users is historically based on clinicians' observations and experience, but can be inaccurate and unreliable. Therefore, we present a proof of concept, for five out of six possible degrees of freedom coupling metric system for a socket, using motion analysis calibrated on a 3D printed limb substitute. The method is compatible with any socket suspension method and does not require prior modifications to the socket. Calibration trials were used to locate the axis of rotation of the knee joint referenced against a marker cluster on the thigh; this allowed for the identification of the limb during test trials despite the entire residuum being obscured from view by the socket. The error in the technique was found to be within 0.7 mm in displacement and 0.7 degrees in rotation, based on the control data. Dynamic testing showed the Inter Quartile Range (IQR) of inter time step variance was <0.5 mm/deg for all metrics. The method can form a basis for objective socket evaluation, improve clinical practice and the quality of life for amputees.

Using mechanical testing to assess the effect of lower-limb prosthetic socket texturing on longitudinal suspension

To function effectively, a lower limb prosthetic socket must remain securely coupled to the residual limb during walking, running and other activities of daily living; this coupling is referred to as suspension. When this coupling is insufficient longitudinal pistoning of the socket relative to the residual limb occurs. Increasing friction of the socket/liner interface may improve socket suspension and textured sockets may be fabricated relatively easily with 3D printing. The aim of this study was to investigate longitudinal displacement of sockets with different types of textures under two suspension conditions: passive suction and active vacuum. In order to do this, we developed a mock residual limb and mechanical testing protocol. Prosthetic sockets, 14 textured sockets and an Original Squirt-Shape (OSS) Socket, were fabricated from polypropylene copolymer using the Squirt-Shape^™ 3D Printer and compared to a smooth socket thermoformed from polypropylene copolymer. Sockets were mounted onto a dual durometer mock residual limb and subjected to four levels of distraction forces (100 N, 250 N, 500 N and 650 N) using a hydraulic material testing system. There was a statistically significant three-way interaction between suspension, force level and texture (p < 0.0005). Longitudinal displacements between textured and reference sockets, for all force levels and both suspension conditions, were significantly different (p < 0.0005). Using these newly developed mechanical testing protocols, it was demonstrated that texturing of polypropylene copolymer sockets fabricated using Squirt-Shape significantly decreased longitudinal displacements compared to a smooth socket. However, none of the novel textured sockets significantly reduced longitudinal displacement compared to the OSS socket under passive suction suspension.

A Sensor Array for the Measurement of Relative Motion in Lower Limb Prosthetic Sockets

The relative motion between residual limb and prosthetic socket could be a relevant factor in quantifying socket fit. The measurement of these movements, particularly in dynamic gait situations, poses a challenging task. This paper presents the realization of a measurement concept based on multiple optical 2D-motion sensors. The performance of the system was evaluated on a test rig considering accuracy and precision as well as accomplished measurement frequency and reliability of the system. Additionally, results of a pilot study measuring the relative motion between residual limb and prosthetic socket at seven specific locations of one individual with transtibial amputation during straight level walking are presented. The sensor functionality of the array was confirmed and the test rig experiments were comparable to the previously tested functional model ( e r r rel = 0.52 ± 1.87 %). With a sampling frequency of 1.3 kHz to be distributed among the number of sensor units, the developed system is suitable for investigating the relative movement between residual limb and prosthetic socket in dynamic gait situations. Results of the pilot study show the majority of relative motion occurring during the second half of the gait cycle. The measured relative motions show the residual limb sinking deeper into the socket, extending in the Sagittal plane and rotating internally in the Transverse plane during stance phase. Data captured during swing phase indicate a lower limb extension in the Sagittal plane as well as an external rotation in the Transverse plane.