1
|
Cheng S, Laubscher CA, Gregg RD. Automatic Stub Avoidance for a Powered Prosthetic Leg Over Stairs and Obstacles. IEEE Trans Biomed Eng 2024; 71:1499-1510. [PMID: 38060364 PMCID: PMC11035099 DOI: 10.1109/tbme.2023.3340628] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/23/2024]
Abstract
Passive prosthetic legs require undesirable compensations from amputee users to avoid stubbing obstacles and stairsteps. Powered prostheses can reduce those compensations by restoring normative joint biomechanics, but the absence of user proprioception and volitional control combined with the absence of environmental awareness by the prosthesis increases the risk of collisions. This article presents a novel stub avoidance controller that automatically adjusts prosthetic knee/ankle kinematics based on suprasensory measurements of environmental distance from a small, lightweight, low-power, low-cost ultrasonic sensor mounted above the prosthetic ankle. In a case study with two transfemoral amputee participants, this control method reduced the stub rate during stair ascent by 89.95% and demonstrated an 87.50% avoidance rate for crossing different obstacles on level ground. No thigh kinematic compensation was required to achieve these results. These findings demonstrate a practical perception solution for powered prostheses to avoid collisions with stairs and obstacles while restoring normative biomechanics during daily activities.
Collapse
|
2
|
Cortino RJ, Best TK, Gregg RD. Data-Driven Phase-Based Control of a Powered Knee-Ankle Prosthesis for Variable-Incline Stair Ascent and Descent. IEEE TRANSACTIONS ON MEDICAL ROBOTICS AND BIONICS 2024; 6:175-188. [PMID: 38304755 PMCID: PMC10829527 DOI: 10.1109/tmrb.2023.3328656] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/03/2024]
Abstract
Powered knee-ankle prostheses can offer benefits over conventional passive devices during stair locomotion by providing biomimetic net-positive work and active control of joint angles. However, many modern control approaches for stair ascent and descent are often limited by time-consuming hand-tuning of user/task-specific parameters, predefined trajectories that remove user volition, or heuristic approaches that cannot be applied to both stair ascent and descent. This work presents a phase-based hybrid kinematic and impedance controller (HKIC) that allows for semi-volitional, biomimetic stair ascent and descent at a variety of step heights. We define a unified phase variable for both stair ascent and descent that utilizes lower-limb geometry to adjust to different users and step heights. We extend our prior data-driven impedance model for variable-incline walking, modifying the cost function and constraints to create a continuously-varying impedance parameter model for stair ascent and descent over a continuum of step heights. Experiments with above-knee amputee participants (N=2) validate that our HKIC controller produces biomimetic ascent and descent joint kinematics, kinetics, and work across four step height configurations. We also show improved kinematic performance with our HKIC controller in comparison to a passive microprocessor-controlled device during stair locomotion.
Collapse
Affiliation(s)
- Ross J Cortino
- Department of Robotics, University of Michigan, Ann Arbor, MI 48109
| | - T Kevin Best
- Department of Robotics, University of Michigan, Ann Arbor, MI 48109
| | - Robert D Gregg
- Department of Robotics, University of Michigan, Ann Arbor, MI 48109
| |
Collapse
|
3
|
Cheng S, Laubscher CA, Gregg RD. Controlling Powered Prosthesis Kinematics over Continuous Transitions Between Walk and Stair Ascent. PROCEEDINGS OF THE ... IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS. IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS 2023; 2023:2108-2115. [PMID: 38130335 PMCID: PMC10732262 DOI: 10.1109/iros55552.2023.10341457] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/23/2023]
Abstract
One of the primary benefits of emerging powered prosthetic legs is their ability to facilitate step-over-step stair ascent by providing positive mechanical work. Existing control methods typically have distinct steady-state activity modes for walking and stair ascent, where activity transitions involve discretely switching between controllers and often must be initiated with a particular leg. However, these discrete transitions do not necessarily replicate able-bodied joint biomechanics, which have been shown to continuously adjust over a transition stride. This paper presents a phase-based kinematic controller for a powered knee-ankle prosthesis that enables continuous, biomimetic transitions between walking and stair ascent. The controller tracks joint angles from a data-driven kinematic model that continuously interpolates between the steady-state kinematic models, and it allows both the prosthetic and intact leg to lead the transitions. Results from experiments with two transfemoral amputee participants indicate that knee and ankle kinematics smoothly transition between walking and stair ascent, with comparable or lower root mean square errors compared to variations from able-bodied data.
Collapse
Affiliation(s)
- Shihao Cheng
- Department of Robotics, University of Michigan, Ann Arbor, MI, 48109 USA
| | - Curt A Laubscher
- Department of Robotics, University of Michigan, Ann Arbor, MI, 48109 USA
| | - Robert D Gregg
- Department of Robotics, University of Michigan, Ann Arbor, MI, 48109 USA
| |
Collapse
|
4
|
Eken H, Pergolini A, Mazzarini A, Livolsi C, Fagioli I, Penna MF, Gruppioni E, Trigili E, Crea S, Vitiello N. Continuous Phase Estimation in a Variety of Locomotion Modes Using Adaptive Dynamic Movement Primitives. IEEE Int Conf Rehabil Robot 2023; 2023:1-6. [PMID: 37941254 DOI: 10.1109/icorr58425.2023.10304682] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2023]
Abstract
Accurate gait phase estimation algorithms can be used to synchronize the action of wearable robots to the volitional user movements in real time. Current-day gait phase estimation methods are designed mostly for rhythmic tasks and evaluated in highly controlled walking environments (namely, steady-state walking). Here, we implemented adaptive Dynamic Movement Primitives (aDMP) for continuous real-time phase estimation in the most common locomotion activities of daily living, which are level-ground walking, stair negotiation, and ramp negotiation. The proposed method uses the thigh roll angle and foot-contact information and was tested in real time with five subjects. The estimated phase resulted in an average root-mean-square error of 3.98% ± 1.33% and a final estimation error of 0.60% ± 0.55% with respect to the linear phase. The results of this study constitute a viable groundwork for future phase-based control strategies for lower-limb wearable robots, such as robotic prostheses or exoskeletons.
Collapse
|
5
|
Rasheed F, Martin S, Tse KM. Design, Kinematics and Gait Analysis, of Prosthetic Knee Joints: A Systematic Review. Bioengineering (Basel) 2023; 10:773. [PMID: 37508800 PMCID: PMC10376202 DOI: 10.3390/bioengineering10070773] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/25/2023] [Revised: 06/19/2023] [Accepted: 06/23/2023] [Indexed: 07/30/2023] Open
Abstract
The aim of this review article is to appraise the design and functionality of above-knee prosthetic legs. So far, various transfemoral prosthetic legs are found to offer a stable gait to amputees but are limited to laboratories. The commercially available prosthetic legs are not reliable and comfortable enough to satisfy amputees. There is a dire need for creating a powered prosthetic knee joint that could address amputees' requirements. To pinpoint the gap in transfemoral prosthetic legs, prosthetic knee unit model designs, control frameworks, kinematics, and gait evaluations are concentrated. Ambulation exercises, ground-level walking, running, and slope walking are considered to help identify research gaps and areas where existing prostheses can be ameliorated. The results show that above-knee amputees can more effectively manage their issues with the aid of an active prosthesis, capable of reliable gait. To accomplish the necessary control, closed loop controllers and volitional control are integral parts. Future studies should consider designing a transfemoral electromechanical prosthesis based on electromyographic (EMG) signals to better predict the amputee's intent and control in accordance with that intent.
Collapse
Affiliation(s)
- Faiza Rasheed
- Department of Mechanical Engineering and Product Design Engineering, Swinburne University of Technology, 3122 Victoria, Australia
| | - Suzanne Martin
- Institute for Health and Sport, Victoria University, 3011 Victoria, Australia
| | - Kwong Ming Tse
- Department of Mechanical Engineering and Product Design Engineering, Swinburne University of Technology, 3122 Victoria, Australia
| |
Collapse
|
6
|
Best TK, Welker CG, Rouse EJ, Gregg RD. Data-Driven Variable Impedance Control of a Powered Knee-Ankle Prosthesis for Adaptive Speed and Incline Walking. IEEE T ROBOT 2023; 39:2151-2169. [PMID: 37304232 PMCID: PMC10249435 DOI: 10.1109/tro.2022.3226887] [Citation(s) in RCA: 11] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/30/2023]
Abstract
Most impedance-based walking controllers for powered knee-ankle prostheses use a finite state machine with dozens of user-specific parameters that require manual tuning by technical experts. These parameters are only appropriate near the task (e.g., walking speed and incline) at which they were tuned, necessitating many different parameter sets for variable-task walking. In contrast, this paper presents a data-driven, phase-based controller for variable-task walking that uses continuously-variable impedance control during stance and kinematic control during swing to enable biomimetic locomotion. After generating a data-driven model of variable joint impedance with convex optimization, we implement a novel task-invariant phase variable and real-time estimates of speed and incline to enable autonomous task adaptation. Experiments with above-knee amputee participants (N=2) show that our data-driven controller 1) features highly-linear phase estimates and accurate task estimates, 2) produces biomimetic kinematic and kinetic trends as task varies, leading to low errors relative to able-bodied references, and 3) produces biomimetic joint work and cadence trends as task varies. We show that the presented controller meets and often exceeds the performance of a benchmark finite state machine controller for our two participants, without requiring manual impedance tuning.
Collapse
Affiliation(s)
- T Kevin Best
- Department of Electrical Engineering and Computer Science and the Robotics Institute, University of Michigan, Ann Arbor, MI 48109
| | - Cara Gonzalez Welker
- Department of Electrical Engineering and Computer Science and the Robotics Institute, University of Michigan, Ann Arbor, MI 48109
| | - Elliott J Rouse
- Department of Mechanical Engineering and the Robotics Institute, University of Michigan, Ann Arbor, MI 48109
| | - Robert D Gregg
- Department of Electrical Engineering and Computer Science and the Robotics Institute, University of Michigan, Ann Arbor, MI 48109
| |
Collapse
|
7
|
Keller EG, Laubscher CA, Gregg RD. Gait Event Detection with Proprioceptive Force Sensing in a Powered Knee-Ankle Prosthesis: Validation over Walking Speeds and Slopes. IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION : ICRA : [PROCEEDINGS]. IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION 2023; 2023:10464-10470. [PMID: 37576784 PMCID: PMC10414786 DOI: 10.1109/icra48891.2023.10161102] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/15/2023]
Abstract
Many powered prosthetic devices use load cells to detect ground interaction forces and gait events. These sensors introduce additional weight and cost in the device. Recent proprioceptive actuators enable an algebraic relationship between actuator torques and ground contact forces. This paper presents a proprioceptive force sensing paradigm which estimates ground reaction forces as a solution to detect gait events without a load cell. A floating body dynamic model is obtained with constraints at the center of pressure representing foot-ground interaction. Constraint forces are derived to estimate ground reaction forces and subsequently timing of gait events. A treadmill experiment is conducted with a powered knee-ankle prosthesis used by an able-bodied subject walking at various speeds and slopes. Results show accurate gait event timing, with pooled data showing heel strike detection lagging by only 6.7 ± 7.2 ms and toe off detection leading by 30.4 ± 11.0 ms compared to values obtained from the load cell. These results establish proof of concept for predicting gait events without a load cell in powered prostheses with proprioceptive actuators.
Collapse
Affiliation(s)
- Emily G Keller
- Department of Robotics, University of Michigan, Ann Arbor, MI 48109
| | - Curt A Laubscher
- Department of Robotics, University of Michigan, Ann Arbor, MI 48109
| | - Robert D Gregg
- Department of Robotics, University of Michigan, Ann Arbor, MI 48109
| |
Collapse
|
8
|
Cheng S, Bolívar-Nieto E, Welker CG, Gregg RD. Modeling the Transitional Kinematics Between Variable-Incline Walking and Stair Climbing. IEEE TRANSACTIONS ON MEDICAL ROBOTICS AND BIONICS 2022; 4:840-851. [PMID: 35991942 PMCID: PMC9386740 DOI: 10.1109/tmrb.2022.3185405] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/09/2023]
Abstract
Although emerging powered prostheses can enable people with lower-limb amputation to walk and climb stairs over different task conditions (e.g., speeds and inclines), the control architecture typically uses a finite-state machine to switch between activity-specific controllers. Because these controllers focus on steady-state locomotion, powered prostheses abruptly switch between controllers during gait transitions rather than continuously adjusting leg biomechanics in synchrony with the users. This paper introduces a new framework for powered prosthesis control by modeling the lower-limb joint kinematics over a continuum of variable-incline walking and stair climbing, including steady-state and transitional gaits. Steady-state models for walking and stair climbing represent joint kinematics as continuous functions of gait phase, forward speed, and incline. Transition models interpolate kinematics as convex combinations of the two steady-state models, with an additional term to account for kinematics that fall outside their convex hull. The coefficients of this convex combination denote the similarity of the transitional kinematics to each steady-state mode, providing insight into how able-bodied individuals continuously transition between ambulation modes. Cross-validation demonstrates that the model predictions of untrained kinematics have errors within the range of physiological variability for all joints. Simulation results demonstrate the model's robustness to incline estimation and mode classification errors.
Collapse
Affiliation(s)
- Shihao Cheng
- Department of Mechanical Engineering and the Robotics Institute, University of Michigan, Ann Arbor, MI, 48109 USA
| | - Edgar Bolívar-Nieto
- Department of Electrical and Computer Engineering and the Robotics Institute, University of Michigan, Ann Arbor, MI, 48109 USA
| | - Cara Gonzalez Welker
- Department of Electrical and Computer Engineering and the Robotics Institute, University of Michigan, Ann Arbor, MI, 48109 USA
| | - Robert D Gregg
- Department of Electrical and Computer Engineering and the Robotics Institute, University of Michigan, Ann Arbor, MI, 48109 USA
| |
Collapse
|