First heart sound detection for phonocardiogram segmentation

Novel phonocardiography system for heartbeat detection from various locations

The paper presents evaluation of the proposed phonocardiography (PCG) measurement system designed primarily for heartbeat detection to estimate heart rate (HR). Typically, HR estimation is performed using electrocardiography (ECG) or pulse wave as one of the fundamental diagnostic methodologies for assessing cardiac function. The system includes novel both sensory part and data processing procedure, which is based on signal preprocessing using Wavelet Transform (WT) and Shannon energy computation and heart sounds classification using K-means. Due to the lack of standardization in the placement of PCG sensors, the study focuses on evaluating the signal quality obtained from 7 different sensor locations on the subject's chest and investigates which locations are most suitable for recording heart sounds. The suitability of sensor localization was examined in 27 subjects by detecting the first two heart sounds (S1, S2). The HR detection sensitivity related to reference ECG from all sensor positions reached values over 88.9 and 77.4% in detection of S1 and S2, respectively. The placement in the middle of sternum showed the higher signal quality with median of the proper S1 and S2 detection sensitivity of 98.5 and 97.5%, respectively.

Hybrid Convolutional Networks for End-to-End Event Detection in Concurrent PPG and PCG Signals Affected by Motion Artifacts

The accurate detection of physiologically-related events in photopletismographic (PPG) and phocardiographic (PCG) signals, recorded by wearable sensors, is mandatory to perform the estimation of relevant cardiovascular parameters like the heart rate and the blood pressure. However, the measurement performed in uncontrolled conditions without clinical supervision leaves the detection quality particularly susceptible to noise and motion artifacts. The performed work proposed a new fully-automatic computational framework, based on convolutional networks, to identify and localize fiducial points in time as the foot, maximum slope and peak in PPG signal and the S1 sound in the PCG signal, both acquired by a custom chest sensor, described recently in the literature by our group. The novelty entailing a custom neural architecture to process sequentially the PPG and PCG signals. Tests were performed analysing four different acquisition conditions (rest, cycling, rest recovery and walking). Cross-validation results for the three PPG fiducial points showed identification accuracy greater than 93 % and localization error (RMSE) less than 10 ms. As expected, cycling and walking conditions provided worse results than rest and recovery, however reaching an accuracy greater than 90 % and a localization error lower than 15 ms. Likewise, the identification and localization error for S1 sound were greater than 90 % and lower than 25 ms. Overall, this study showcased the ability of the proposed technique to detect events with high accuracy not only for steady acquisitions but also during subject movements. We also showed that the proposed network outperformed traditional Shannon-energy-envelope method in the detection of S1 sound. Therefore, we argue that coupling chest sensors and deep learning processing techniques may disclose wearable devices to unobtrusively acquire health information, being less affected by noise and motion artifacts.

A novel multi-branch architecture for state of the art robust detection of pathological phonocardiograms

Heart auscultation is an inexpensive and fundamental technique to effectively diagnose cardiovascular disease. However, due to relatively high human error rates even when auscultation is performed by an experienced physician, and due to the not universal availability of qualified personnel, e.g. in developing countries, many efforts are made worldwide to propose computational tools for detecting abnormalities in heart sounds. The large heterogeneity of achievable data quality and devices, the variety of possible heart pathologies, and a generally poor signal-to-noise ratio make this problem very challenging. We present an accurate classification strategy for diagnosing heart sounds based on (1) automatic heart phase segmentation, (2) state-of-the art filters drawn from the field of speech synthesis (mel-frequency cepstral representation) and (3) an ad hoc multi-branch, multi-instance artificial neural network based on convolutional layers and fully connected neuronal ensembles which separately learns from each heart phase hence implicitly leveraging their different physiological significance. We demonstrate that it is possible to train our architecture to reach very high performances, e.g. an area under the curve of 0.87 or a sensitivity of 0.97. Our machine-learning-based tool could be employed for heartsound classification, especially as a screening tool in a variety of situations including telemedicine applications. This article is part of the theme issue 'Advanced computation in cardiovascular physiology: new challenges and opportunities'.

Estimation of heart rate from tracheal sounds recorded for the sleep apnea syndrome diagnosis

Obstructive sleep apnea is a common sleep disorder with a high prevalence and often accompanied by significant snoring activity. To diagnose this condition, polysomnography is the standard method, where a neck microphone could be added to record tracheal sounds. These can then be used to study the characteristics of breathing, snoring or apnea. In addition cardiac sounds, also present in the acquired data, could be exploited to extract heart rate. The paper presents new algorithms for estimating heart rate from tracheal sounds, especially in very loud snoring environment. The advantage is that it is possible to reduce the number of diagnostic devices, especially for compact home applications. Three algorithms are proposed, based on optimal filtering and cross-correlation. They are tested firstly on one patient presenting significant pathology of apnea syndrome, with a recording of 509 min. Secondly, an extension to a database of 16 patients is proposed (16 hours of recording). When compared to a reference ECG signal, the final results obtained from tracheal sounds reach an accuracy of 81% to 98% and an RMS error from 1.3 to 4.2 bpm, according to the level of snoring and to the considered algorithm.

A hybrid method for fundamental heart sound segmentation using group-sparsity denoising and variational mode decomposition

Segmentation of fundamental heart sounds-S1 and S2 is important for automated monitoring of cardiac activity including diagnosis of the heart diseases. This pa-per proposes a novel hybrid method for S1 and S2 heart sound segmentation using group sparsity denoising and variation mode decomposition (VMD) technique. In the proposed method, the measured phonocardiogram (PCG) signals are denoised using group sparsity algorithm by exploiting the group sparse (GS) property of PCG signals. The denoised GS-PCG signals are then decomposed into subsequent modes with specific spectral characteristics using VMD algorithm. The appropriate mode for further processing is selected based on mode central frequencies and mode energy. It is then followed by the extraction of Hilbert envelope (HEnv) and a thresholding on the selected mode to segment S1 and S2 heart sounds. The performance advantage of the proposed method is verified using PCG signals from benchmark databases namely eGeneralMedical, Littmann, Washington, and Michigan. The proposed hybrid algorithm has achieved a sensitivity of 100%, positive predictivity of 98%, accuracy of 98% and detection error rate of 1.5%. The promising results obtained suggest that proposed approach can be considered for automated heart sound segmentation.

A Novel Method for Measuring the Timing of Heart Sound Components through Digital Phonocardiography

The auscultation of heart sounds has been for decades a fundamental diagnostic tool in clinical practice. Higher effectiveness can be achieved by recording the corresponding biomedical signal, namely the phonocardiographic signal, and processing it by means of traditional signal processing techniques. An unavoidable processing step is the heart sound segmentation, which is still a challenging task from a technical viewpoint—a limitation of state-of-the-art approaches is the unavailability of trustworthy techniques for the detection of heart sound components. The aim of this work is to design a reliable algorithm for the identification and the classification of heart sounds’ main components. The proposed methodology was tested on a sample population of 24 healthy subjects over 10-min-long simultaneous electrocardiographic and phonocardiographic recordings and it was found capable of correctly detecting and classifying an average of 99.2% of the heart sounds along with their components. Moreover, the delay of each component with respect to the corresponding R-wave peak and the delay among the components of the same heart sound were computed: the resulting experimental values are coherent with what is expected from the literature and what was obtained by other studies.

Prenatal identification of CHD murmur using four segment phonocardiographic signal analysis

Congenital heart defects (CHD) are one of the utmost birth defects present in the neonatal after birth and a big challenge for the researchers to identify the structural abnormality during the antepartum period. An algorithm is presented here to identify the presence of CHD through foetal phonocardiographic (fPCG) signals. The recorded fPCG is decomposed using Daubechies4 wavelet with sub-level threshold to remove the noise in the signal. The Shannon energy is used to identify the different peaks of signals and then S1 and S2 according to the intervals between adjacent peaks. The signal is segmented into four important parts: S1, S1S2, S2 and S2S1. The FFT is used to identify the frequency component present in four segments which in turn indicates the presence of pathological murmur that may turn into CHD. The algorithm is tested on 25 samples with accuracy rate 88% in identifying the presence of a murmur.

Automated Identification of Innocent Still's Murmur in Children

OBJECTIVE

Still's murmur is the most common innocent heart murmur in children. It is also the most commonly misdiagnosed murmur, resulting in a high number of unnecessary referrals to pediatric cardiologist. The purpose of this study was to develop a computer algorithm for automated identification of Still's murmur that may help reduce unnecessary referrals.

METHODS

We first developed an accurate segmentation algorithm to locate the first and the second heart sounds. Once these sounds were identified, we extracted signal features specific to Still's murmur. Subsequently, machine learning-based classifiers, artificial neural network and support vector machine, were used to identify Still's murmur.

RESULTS

We evaluated our classifiers using the jackknife method using 87 Still's murmurs and 170 non-Still's murmurs. Our algorithm identified Still's murmur accurately with 84-93% sensitivity and 91-99% specificity.

CONCLUSION

We have achieved accurate automated identification of Still's murmur while minimizing false positives. The performance of our algorithm is comparable to the rate of murmur identification by auscultation by pediatric cardiologists.

SIGNIFICANCE

To our knowledge, our solution is the first murmur classifier that focuses singularly on Still's murmur. Following further refinement and testing, the presented algorithm could reduce the number of children with Still's murmur referred unnecessarily to pediatric cardiologists.

Algorithm for heart rate extraction in a novel wearable acoustic sensor

Phonocardiography is a widely used method of listening to the heart sounds and indicating the presence of cardiac abnormalities. Each heart cycle consists of two major sounds – S1 and S2 – that can be used to determine the heart rate. The conventional method of acoustic signal acquisition involves placing the sound sensor at the chest where this sound is most audible. Presented is a novel algorithm for the detection of S1 and S2 heart sounds and the use of them to extract the heart rate from signals acquired by a small sensor placed at the neck. This algorithm achieves an accuracy of 90.73 and 90.69%, with respect to heart rate value provided by two commercial devices, evaluated on more than 38 h of data acquired from ten different subjects during sleep in a pilot clinical study. This is the largest dataset for acoustic heart sound classification and heart rate extraction in the literature to date. The algorithm in this study used signals from a sensor designed to monitor breathing. This shows that the same sensor and signal can be used to monitor both breathing and heart rate, making it highly useful for long-term wearable vital signs monitoring.

Research and application of heart sound alignment and descriptor

The research and application of heart sound (HS) analysis for cardiovascular disease (CVD) diagnosis has attracted more attention recently. Unlike other relevant HS analysis research, such as HS detection/component segmentation, HS feature extraction/classification etc., the proposed research treats HS as a whole and focuses mainly on comparing the similarity of acoustical characteristics reflecting pathological condition between two HSs, one of which is HS under test and another is the HS with known CVD. The concrete procedure refers to alignment of the HS into sequence and evaluating the similarity index through complexity and similarity analysis. In accordance with specific characteristics of HS, several relevant technologies such as musical instrument digital interface (MIDI), binary coding, N-gram, Lempel-Ziv (L-Z) complexity as well as super-symmetric comparison distance (SCD) similarity metric etc. are researched to be adapted and cascaded to realize the aforementioned target successfully. The contribution lies in that the aligning schemes including binary and N-gram are thoroughly investigated and then testing results witnessing the superiority of using N-gram in proposed approach are presented. The success of such a novel approach would not only assign a the new life to the traditional auscultation CVD diagnosis, but also simplify CVD diagnosis greatly leading to extensive application of such an efficient non-invasive physical diagnostic method in e-home healthcare.

Noise and disturbance reduction for heart sounds in cycle-frequency domain based on nonlinear time scaling

Through an investigation of various clinical cases, heart sounds are found to be quasi-cyclostationary. Nonlinear time scaling from cycle-to-cycle is proposed to enhance cyclic stationarity, where nonlinear time scaling is approximated by a piecewise linear function. The techniques of cyclostationary signal processing are employed in this paper to reduce noise and disturbance in the cycle-frequency domain. Heart sounds can be theoretically recovered in the presence of additive, zero mean noise, and disturbance (perhaps non-Gaussian, nonstationary, or colored). The experimental tests in various conditions confirm the theoretical results.