LSPR-based cholesterol biosensor using a tapered optical fiber structure

Fiber ring laser biosensor based on no-core fibers for label-free DNA biomolecule measurements

An erbium-doped fiber ring laser based on a single-mode fiber-no-core fiber-single-mode fiber (SMF-NCF-SMF) structure was constructed and experimentally demonstrated for label-free DNA hybridization measurement. The SMF-NCF-SMF structure acts as a sensing element and a filter to select the laser wavelength. The proposed fiber ring laser sensor exhibits a high optical signal-to-noise ratio (SNR, >50 dB) and narrow full width at half maximum (FWHM, <0.05 nm). Its refractive index sensitivity is 116.8 nm per RIU in the range of 1.3406-1.3705, and its detection limit is 1.79 × 10-4 RIU. By continuously monitoring the laser wavelength, we successfully achieved label-free measurement of complementary DNA (cDNA) at concentrations as low as 1 μM. Subsequently, the specificity of the sensor was detected by non-complementary DNA (N-cDNA). Experimental results show that the fiber ring laser biosensor has the advantages of simple operation, label-free measurement, and high specificity. Furthermore, it shows a broad application prospect in several fields, especially in key areas such as medical diagnosis and cancer screening.

Highly sensitive CD40L protein discrimination via label-free fiber sensing technologies

The recombinant Cluster of Differentiation 40 Ligand (CD40L) can be expressed in various cells and is closely related to various types of cancer. This association underscores the critical need for expedited and precise measurement of CD40L levels in clinical fluid specimens. A novel optical fiber biosensor has been devised, employing single-mode fibers that are sandwiched around a coreless fiber, with the diameter refined by etching with hydrogen fluoride. This innovative configuration allows for light transmission through the evanescent field, thereby enhancing the sensor's sensitivity to changes in the surrounding refractive index. Employing chemical binding techniques, CD40 was securely immobilized onto the fiber's surface, facilitating the detection of CD40L. The sensor exhibited a sensitivity of 1.126 nm (μg mL-1)-1 and a detection limit of 0.68 nM. Furthermore, the sensor's specificity for CD40L was validated using authentic clinical serum samples spiked with artificial analytes. In addition, the specificity of CD40L of the proposed sensor was proved using natural clinical serum samples with added artificial analyte, assisted by the ELISA method, and the results ideally conformed with the detection of standard samples. With the aid of the ELISA method, the outcomes were found to be in excellent agreement with those from standard sample detection. Consequently, the findings indicate that this sensor provides a specific, label-free, and highly sensitive method for CD40L detection, showcasing its significant potential for applications in molecular biology research.

Renewable regeneration optic fiber glucose sensor based on succinylaminobenzenoboronic acid modified excessively tilted fiber grating

BACKGROUND

Optical fiber sensors have been used to detect glucose owing to advantages such as low cost, small size, and ease of operation etc. phenylboronic acid is one of the commonly used receptors for glucose detection, however phenylboronic acid based regenerative optical fiber sensors are commonly cumulative regeneration, renewable regeneration sensor has been missing from the literature.

RESULTS

In this work, instead of using phenylboronic acid, we synthesized succinylaminobenzenoboronic acid molecule (BPOA) by introducing a short chain containing carboxyl group at the other end of phenylboronic acid then covalently bonded BPOA on the surface of excessively tilted fiber grating (Ex-TFG). This provides a very stable platform for renewable regeneration and the regenerative buffer was also optimized. The proposed renewable regeneration method exhibited higher linearity and sensitivity (R2 = 0.9992, 8 pm/mM) in relative to the conventional cumulative regeneration method (R2 = 0.9718, 4.9 pm/mM). The binding affinity between BPOA and glucose was found to be almost constant over 140 bind/release cycles with a variation of less than 0.3 % relative standard deviation.

SIGNIFICANCE

The regenerative and label-free sensing capacity of the proposed device provides a theoretical foundation for label-free saccharide detection and the development of wearable glucose monitoring devices based on fiber optic sensors.

Portable optical fiber biosensors integrated with smartphone: technologies, applications, and challenges [Invited]

The increasing demand for individualized health monitoring and diagnostics has prompted considerable research into the integration of portable optical fiber biosensors integrated with smartphones. By capitalizing on the benefits offered by optical fibers, these biosensors enable qualitative and quantitative biosensing across a wide range of applications. The integration of these sensors with smartphones, which possess advanced computational power and versatile sensing capabilities, addresses the increasing need for portable and rapid sensing solutions. This extensive evaluation thoroughly examines the domain of optical fiber biosensors in conjunction with smartphones, including hardware complexities, sensing approaches, and integration methods. Additionally, it explores a wide range of applications, including physiological and chemical biosensing. Furthermore, the review provides an analysis of the challenges that have been identified in this rapidly evolving area of research and concludes with relevant suggestions for the progression of the field.

Cascaded plastic optical fiber based SPR sensor for simultaneous measurement of refractive index and temperature

A cascaded side-polish plastic optical fiber (POF) and FONTEX optical fiber based surface plasmon resonance (SPR) sensor is proposed for simultaneous measurement of refractive index (RI) and temperature. The side-polish POF and FONTEX optical fiber are connected by using the UV glue in a Teflon plastic tube. The SPR phenomenon can be excited at both of the side-polish region and the FONTEX fiber cladding. The polydimethylsiloxane (PDMS) is coated on the side-polish POF to get a temperature sensing channel. Due to the low RI sensitivity of the FONTEX optical fiber, the cascaded fiber sensor can obtain a broader RI measurement range with a low crosstalk. An RI sensitivity of 700 nm/RIU in the RI measurement range of 1.335-1.39 and a temperature sensitivity of -1.02 nm/°C measured in deionized water with a range of 20-60 °C are obtained. In addition, the cascaded POF based SPR sensor has potential application prospects in the field of biochemical sensing.

A review on hybridization of plasmonic and photonic crystal biosensors for effective cancer cell diagnosis

Cancer causes one in six deaths worldwide, and 1.6 million cancer patients face annual out-of-pocket medical expenditures. In response to these, portable, label-free, highly sensitive, specific, and responsive optical biosensors are under development. Therefore, in this review, the recent advances, advantages, performance analysis, and current challenges associated with the fabrication of plasmonic biosensors, photonic crystals, and the hybridization of both for cancer diagnosis are assessed. The primary focus is on the development of biosensors that combine different shapes, sizes, and optical properties of metallic and dielectric nanoparticles with various coupling techniques. The latter part discusses the challenges and prospects of developing effective biosensors for early cancer diagnosis using dielectric and metallic nanoparticles. These data will help the audience advance research and development of next-generation plasmonic biosensors for effective cancer diagnosis.

Nickel Oxy-Hydroxy/Multi-Wall Carbon Nanotubes Film Coupled with a 3D-Printed Device as a Nonenzymatic Glucose Sensor

A rapid and simple method for the amperometric determination of glucose using a nanocomposite film of nickel oxyhydroxide and multi-walled carbon nanotube (MWCNTs) was evaluated. The NiHCF)/MWCNT electrode film was fabricated using the liquid-liquid interface method, and it was used as a precursor for the electrochemical synthesis of nickel oxy-hydroxy (Ni(OH)₂/NiOOH/MWCNT). The interaction between nickel oxy-hydroxy and the MWCNTs provided a film that is stable over the electrode surface, with high surface area and excellent conductivity. The nanocomposite presented an excellent electrocatalytic activity for the oxidation of glucose in an alkaline medium. The sensitivity of the sensor was found to be 0.0561 μA μmol L^-1, and a linear range from 0.1 to 150 μmol L^-1 was obtained, with a good limit of detection (0.030 μmol L^-1). The electrode exhibits a fast response (150 injections h^-1) and a sensitive catalytic performance, which may be due to the high conductivity of MWCNT and the increased active surface area of the electrode. Additionally, a minimal difference in the slopes for ascending (0.0561 µA µmol L^-1) and descending (0.0531 µA µmol L^-1) was observed. Moreover, the sensor was applied to the detection of glucose in artificial plasma blood samples, achieving values of 89 to 98% of recovery.

Microfluidic Biosensor Based on Molybdenum Disulfide (MoS2) Modified Thin-Core Microfiber for Immune Detection of Toxoplasma gondii

Toxoplasma gondii (T. gondii) is a zoonotic parasite that is widely distributed and seriously endangers public health and human health. Therefore, accurate and effective detection of T. gondii is crucial. This study proposes a microfluidic biosensor using a thin-core microfiber (TCMF) coated with molybdenum disulfide (MoS₂) for immune detection of T. gondii. The single-mode fiber was fused with the thin-core fiber, and the TCMF was obtained by arc discharging and flame heating. In order to avoid interference and protect the sensing structure, the TCMF was encapsulated in the microfluidic chip. MoS₂ and T. gondii antigen were modified on the surface of TCMF for the immune detection of T. gondii. Experimental results showed that the detection range of the proposed biosensor for T. gondii monoclonal antibody solutions was 1 pg/mL to 10 ng/mL with sensitivity of 3.358 nm/log(mg/mL); the detection of limit was calculated to be 87 fg/mL through the Langmuir model; the dissociation constant and the affinity constant were calculated to be about 5.79 × 10^-13 M and 1.727 × 10¹⁴ M^-1, respectively. The specificity and clinical characteristics of the biosensor was explored. The rabies virus, pseudorabies virus, and T. gondii serum were used to confirm the excellent specificity and clinical characteristics of the biosensor, indicating that the proposed biosensor has great application potential in the biomedical field.

Label-free and selective cholesterol detection based on multilayer functional structure coated fiber fabry-perot interferometer probe

A reflective fiber-optic Fabry-Perot cavity probe sensor is proposed to selectively measure cholesterol concentration by insert single mode fiber into ceramic tube and immobilize epoxy resin (ER)/graphene oxide (GO)/beta-cyclodextrin (β-CD) multi-layer film onto end face of ceramic tube. EDC/NHS activated GO is selected to form chemical binding with β-CD, and β-CD is the sensitive materials to bind with cholesterol molecules. With multi-layer film assisted, the sensitivity of sensor to cholesterol concentration can reach 3.92 nm/mM and the limit of detection reaches 3.48 μ M. In addition, 4 mM hemoglobin, glucose and ascorbic acid are doped into a set cholesterol sample and verified the highly selectivity of sensing cholesterol. Furthermore, the reproducibility was proved by measure the spectrum of four sensors with same fabrication process, and the reusability was also proved by repeated measurements. Overall, the sensor features with high mechanical strength, ease of fabrication, real-time monitoring, low cost and ease for measurement that given by probe structure. Therefore, the sensor provides a remarkable analytical platform for biosensing applications.

Recent Advancements of LSPR Fiber-Optic Biosensing: Combination Methods, Structure, and Prospects

Fiber-optic biosensors based on localized surface plasmon resonance (LSPR) have the advantages of great biocompatibility, label-free, strong stability, and real-time monitoring of various analytes. LSPR fiber-optic biosensors have attracted extensive research attention in the fields of environmental science, clinical medicine, disease diagnosis, and food safety. The latest development of LSPR fiber-optic biosensors in recent years has focused on the detection of clinical disease markers and the detection of various toxic substances in the environment and the progress of new sensitization mechanisms in LSPR fiber-optic sensors. Therefore, this paper reviews the LSPR fiber-optic sensors from the aspects of working principle, structure, and application fields in biosensors. According to the structure, the sensor can be divided into three categories: traditional ordinary optical fiber, special shape optical fiber, and specialty optical fiber. The advantages and disadvantages of existing and future LSPR fiber-optic biosensors are discussed in detail. Additionally, the prospect of future development of fiber-optic biosensors based on LSPR is addressed.

Copper-Guanosine Nanorods (Cu-Guo NRs) as a Laccase Mimicking Nanozyme for Colorimetric Detection of Rutin

Inspired by laccase activity, herein, Cu-guanosine nanorods (Cu-Guo NRs) have been synthesized for the first time through a simple procedure. The activity of the Cu-Guo NR as the laccase mimicking nanozyme has been examined in the colorimetric sensing of rutin (Rtn) by a novel and simple spectrophotometric method. The distinct changes in the absorbance signal intensity of Rtn and a distinguished red shift under the optimum condition based on pH and ionic strength values confirmed the formation of the oxidized form of Rtn (o-quinone) via laccase-like nanozyme activity of Cu-Guo NRs. A vivid and concentration-dependent color variation from green to dark yellow led to the visual detection of Rtn in a broad concentration range from 770 nM to 54.46 µM with a limit of detection (LOD) of 114 nM. The proposed methodology was successfully applied for the fast tracing of Rtn in the presence of certain common interfering species and various complex samples such as propolis dry extract, human biofluids, and dietary supplement tablets, with satisfactory precision. The sensitivity and selectivity of the developed sensor, which are bonuses in addition to rapid, on-site, cost-effective, and naked-eye determination of Rtn, hold great promise to provide technical support for routine analysis in the real world.

Microfluidic Electrochemical Glucose Biosensor with In Situ Enzyme Immobilization

The development and characterization of a microfluidic electrochemical glucose biosensor are presented herein. The transducer part is based on thin-film metal electrodes on a glass substrate. The biological recognition element of the biosensor is the pyrroloquinoline quinone-glucose dehydrogenase (PQQ-GdhB) enzyme, selectively in situ immobilized via microcontact printing of a mixed self-assembling monolayer (SAM) on a gold working electrode, while the microfluidic part of the device comprises microchannel and microfluidic connections formed in a polydimethylsiloxane (PDMS) elastomer. The electrode properties throughout all steps of biosensor construction and the biosensor response to glucose concentration and analyte flow rate were characterized by cyclic voltammetry and chronoamperometry. A measurement range of up to 10 mM in glucose concentration with a linear range up to 200 μM was determined. A detection limit of 30 µM in glucose concentration was obtained. Respective biosensor sensitivities of 0.79 nA/µM/mm² and 0.61 nA/µM/mm² were estimated with and without a flow at 20 µL/min. The developed approach of in situ enzyme immobilization can find a wide number of applications in the development of microfluidic biosensors, offering a path towards continuous and time-independent detection.

Recent Progress in Plasmonic based Electrochemiluminescence Biosensors: A Review

Electrochemiluminescence (ECL) analysis has become a powerful tool in recent biomarker detection and clinic diagnosis due to its high sensitivity and broad linear range. To improve the analytical performance of ECL biosensors, various advanced nanomaterials have been introduced to regulate the ECL signal such as graphene, gold nanomaterials, and quantum dots. Among these nanomaterials, some plasmonic nanostructures play important roles in the fabrication of ECL biosensors. The plasmon effect for the ECL signal includes ECL quenching by resonant energy transfer, ECL enhancement by surface plasmon resonance enhancement, and a change in the polarized angle of ECL emission. The influence can be regulated by the distance between ECL emitters and plasmonic materials, and the characteristics of polarization angle-dependent surface plasmon coupling. This paper outlines the recent advances of plasmonic based ECL biosensors involving various plasmonic materials including noble metals and semiconductor nanomaterials. The detection targets in these biosensors range from small molecules, proteins, nucleic acids, and cells thanks to the plasmonic effect. In addition to ECL biosensors, ECL microscopy analysis with plasmonic materials is also highlighted because of the enhanced ECL image quality by the plasmonic effect. Finally, the future opportunities and challenges are discussed if more plasmonic effects are introduced into the ECL realm.

Applications of Optical Fiber in Label-Free Biosensors and Bioimaging: A Review

Biosensing and bioimaging are essential in understanding biological and pathological processes in a living system, for example, in detecting and understanding certain diseases. Optical fiber has made remarkable contributions to the biosensing and bioimaging areas due to its unique advantages of compact size, immunity to electromagnetic interference, biocompatibility, fast response, etc. This review paper will present an overview of seven common types of optical fiber biosensors and optical fiber-based ultrasound detection in photoacoustic imaging (PAI) and the applications of these technologies in biosensing and bioimaging areas. Of course, there are many types of optical fiber biosensors. Still, this paper will review the most common ones: optical fiber grating, surface plasmon resonance, Sagnac interferometer, Mach-Zehnder interferometer, Michelson interferometer, Fabry-Perot Interferometer, lossy mode resonance, and surface-enhanced Raman scattering. Furthermore, different optical fiber techniques for detecting ultrasound in PAI are summarized. Finally, the main challenges and future development direction are briefly discussed.

A review of Optical Point-of-Care devices to Estimate the Technology Transfer of These Cutting-Edge Technologies

Despite the remarkable development related to Point-of-Care devices based on optical technology, their difficulties when used outside of research laboratories are notable. In this sense, it would be interesting to ask ourselves what the degree of transferability of the research work to the market is, for example, by analysing the relation between the scientific work developed and the registered one, through patent. In this work, we provide an overview of the state-of-the-art in the sector of optical Point-of-Care devices, not only in the research area but also regarding their transfer to market. To this end, we explored a methodology for searching articles and patents to obtain an indicator that relates to both. This figure of merit to estimate this transfer is based on classifying the relevant research articles in the area and the patents that have been generated from these ones. To delimit the scope of this study, we researched the results of a large enough number of publications in the period from 2015 to 2020, by using keywords "biosensor", "optic", and "device" to obtain the most representative articles from Web of Science and Scopus. Then, we classified them according to a particular classification of the optical PoC devices. Once we had this sampling frame, we defined a patent search strategy to cross-link the article with a registered patent (by surfing Google Patents) and classified them accordingly to the categories described. Finally, we proposed a relative figure called Index of Technology Transference (IoTT), which estimates to what extent our findings in science materialized in published articles are protected by patent.

Functionalized silver nanoparticles for SERS amplification with enhanced reproducibility and for ultrasensitive optical fiber sensing in environmental and biochemical assays

Plasmonic sensors have broad application potential in many fields and are promising to replace most bulky sensors in the future. There are various method-based chemical reduction processes for silver nanoparticle production with flexible structural shapes due to their simplicity and rapidity in nanoparticle fabrication. In this study, self-assembled silver nanoparticles (Ag NPs) with a plasmon peak at 424 nm were successfully coated onto -NH2-functionalized glass and optical fiber sensors. These coatings were rapidly produced via two denaturation reactions in plasma oxygen, respectively, and an APTES ((3-aminopropyl)triethoxysilane) solution was shown to have high strength and uniformity. With the use of Ag NPs for surface-enhanced Raman scattering (SERS), excellent results and good stability with the detection limit up to 10-10 M for rhodamine B and 10-8 M for methylene blue, and a signal degradation of only ∼20% after storing for 30 days were achieved. In addition, the optical fiber sensor with Ag NP coatings exhibited a higher sensitivity value of 250 times than without coatings to the glycerol solution. Therefore, significant enhancement of these ultrasensitive sensors demonstrates promising alternatives to cumbersome tests of dye chemicals and biomolecules without any complicated process.

Advances in Novel Nanomaterial-Based Optical Fiber Biosensors-A Review

This article presents a concise summary of current advancements in novel nanomaterial-based optical fiber biosensors. The beneficial optical and biological properties of nanomaterials, such as nanoparticle size-dependent signal amplification, plasmon resonance, and charge-transfer capabilities, are widely used in biosensing applications. Due to the biocompatibility and bioreceptor combination, the nanomaterials enhance the sensitivity, limit of detection, specificity, and response time of sensing probes, as well as the signal-to-noise ratio of fiber optic biosensing platforms. This has established a practical method for improving the performance of fiber optic biosensors. With the aforementioned outstanding nanomaterial properties, the development of fiber optic biosensors has been efficiently promoted. This paper reviews the application of numerous novel nanomaterials in the field of optical fiber biosensing and provides a brief explanation of the fiber sensing mechanism.

Cost-Effective Fiber Optic Solutions for Biosensing

In the last years, optical fiber sensors have proven to be a reliable and versatile biosensing tool. Optical fiber biosensors (OFBs) are analytical devices that use optical fibers as transducers, with the advantages of being easily coated and biofunctionalized, allowing the monitorization of all functionalization and detection in real-time, as well as being small in size and geometrically flexible, thus allowing device miniaturization and portability for point-of-care (POC) testing. Knowing the potential of such biosensing tools, this paper reviews the reported OFBs which are, at the moment, the most cost-effective. Different fiber configurations are highlighted, namely, end-face reflected, unclad, D- and U-shaped, tips, ball resonators, tapered, light-diffusing, and specialty fibers. Packaging techniques to enhance OFBs' application in the medical field, namely for implementing in subcutaneous, percutaneous, and endoscopic operations as well as in wearable structures, are presented and discussed. Interrogation approaches of OFBs using smartphones' hardware are a great way to obtain cost-effective sensing approaches. In this review paper, different architectures of such interrogation methods and their respective applications are presented. Finally, the application of OFBs in monitoring three crucial fields of human life and wellbeing are reported: detection of cancer biomarkers, detection of cardiovascular biomarkers, and environmental monitoring.

Mesoporous NiCo2S4nanoflakes as an efficient and durable electrocatalyst for non-enzymatic detection of cholesterol

The detection of cholesterol is very crucial in clinical diagnosis for rapid and accurate monitoring of multiple disease-biomarkers. There is a great need for construction of a highly reliable and stable electrocatalyst for the efficient detection of cholesterol. In this work, mesoporous NiCo₂S₄nanoflakes of enhanced electrochemical properties are prepared through a facile hydrothermal approach. The developed nanoflakes modified nickel foam electrode exhibits outstanding electrocatalytic properties for the detection of cholesterol with high selectivity. The electrode displays excellent sensitivity of 8623.6μA mM^-1cm^-2, in the wide linear range from 0.01 to 0.25 mM with a low detection limit of 0.01μM. In addition, NiCo₂S₄structure reveals good thermal stability and reproducibility over a period of 8 weeks. Moreover, the nanoflakes show good response for detection of cholesterol in real samples. Our results demonstrate the potential use of NiCo₂S₄as a catalyst for the development of cost-effective electrochemical sensors for medical and industrial applications.

Mach-Zehnder interferometer comb filter for multi-wavelength mode-locked generation from erbium-doped fiber laser

A picosecond pulse multi-wavelength erbium-doped fiber ring laser based on an optically switchable/tunable Mach-Zehnder interferometer (MZI) filter is proposed and experimentally demonstrated. The MZI configuration is constructed with two 3 dB couplers and two short pieces of endlessly single-mode photonic crystal fiber with different lengths in each arm. The combination of the MZI and a polarization controller (PC) acts as a selective comb filter and a mode-locking device. By adjusting the pump power or the first PC (PC1) state, the laser can emit up to 10 channels with a 20 nm tuning range (1530 to 1550 nm). Furthermore, by changing the PC1 condition, stable picosecond mode-locking generation with a repetition rate of 13.5 MHz is realized. To achieve wavelength spacing tunable multiple-channel laser emissions, the MZI is configured by incorporating a second PC (PC2) in one arm of the conventional MZI. Four channels of picosecond mode-locking pulses with a repetition rate of 11.6 MHz in the range of 1530-1550 nm are realized by carefully controlling the pump power and/or PC2 state. With the manipulation of intracavity birefringence through PCs with comb filtering via MZI, the proposed structure may be a potential tool in various photonics applications.

A plug-and-play optical fiber SPR sensor for simultaneous measurement of glucose and cholesterol concentrations

A plug-and-play surface plasmon resonance (SPR) dual-parameter optical fiber biosensor is reported, in which Au film was firstly coated on the fiber surface for exciting SPR and the end half of the Au film was modified with Au nanoparticles to generate double SPR resonance valleys. For simultaneous detecting of glucose and cholesterol concentrations, modified P-mercaptophenylboronic acid (PMBA) and β-cyclodextrin (β-CD) were subsequently coated on the surface of sensor probe. Due to the cis-diol structure of glucose, it can interact with PMBA, leading to a red shift of one SPR resonant valley, whose maximum wavelength shift is 11.228 nm in the range of 0-1.7 mM glucose concentration. On the same time, the cholesterol molecules can realize the host-guest combination with β-CD, leading to a red shift of another SPR resonant valley, and the maximum wavelength shift is 18.893 nm in the cholesterol concentration range of 0-300 nM. The detection limits of the sensor to glucose and cholesterol are 0.00078 mM and 0.012 nM, respectively. The enhances the practical value of the dual-parameter sensor. Both theory and experiment results verify the feasibility of the "plug-and-play" sensor to measure the dual biomass of glucose and cholesterol with ultra-low detection limit and good selectivity. The proposed method provides a huge research value for the optical fiber sensor in multi-parameter measurement.

Optical Biomedical Diagnostics Using Lab-on-Fiber Technology: A Review

Point-of-care and in-vivo bio-diagnostic tools are the current need for the present critical scenarios in the healthcare industry. The past few decades have seen a surge in research activities related to solving the challenges associated with precise on-site bio-sensing. Cutting-edge fiber optic technology enables the interaction of light with functionalized fiber surfaces at remote locations to develop a novel, miniaturized and cost-effective lab on fiber technology for bio-sensing applications. The recent remarkable developments in the field of nanotechnology provide innumerable functionalization methodologies to develop selective bio-recognition elements for label free biosensors. These exceptional methods may be easily integrated with fiber surfaces to provide highly selective light-matter interaction depending on various transduction mechanisms. In the present review, an overview of optical fiber-based biosensors has been provided with focus on physical principles used, along with the functionalization protocols for the detection of various biological analytes to diagnose the disease. The design and performance of these biosensors in terms of operating range, selectivity, response time and limit of detection have been discussed. In the concluding remarks, the challenges associated with these biosensors and the improvement required to develop handheld devices to enable direct target detection have been highlighted.

SERS Platform Based on Hollow-Core Microstructured Optical Fiber: Technology of UV-Mediated Gold Nanoparticle Growth

Surface-enhanced Raman spectroscopy (SERS) is a powerful technique for biosensing. However, SERS analysis has several concerns: the signal is limited by a number of molecules and the area of the plasmonic substrate in the laser hotspot, and quantitative analysis in a low-volume droplet is confusing due to the change of concentration during quick drying. The usage of hollow-core microstructured optical fibers (HC-MOFs) is thought to be an effective way to improve SERS sensitivity and limit of detection through the effective irradiation of a small sample volume filling the fiber capillaries. In this paper, we used layer-by-layer assembly as a simple method for the functionalization of fiber capillaries by gold nanoparticles (seeds) with a mean diameter of 8 nm followed by UV-induced chloroauric acid reduction. We also demonstrated a simple and quick technique used for the analysis of the SERS platform formation at every stage through the detection of spectral shifts in the optical transmission of HC-MOFs. The enhancement of the Raman signal of a model analyte Rhodamine 6G was obtained using such type of SERS platform. Thus, a combination of nanostructured gold coating as a SERS-active surface and a hollow-core fiber as a microfluidic channel and a waveguide is perspective for point-of-care medical diagnosis based on liquid biopsy and exhaled air analysis.

Vernier effect assisted sucrose sensor based on a cascaded Sagnac interferometer with no-core fiber

We propose a sucrose concentration sensor by utilizing a fiber Sagnac interferometer with no-core fiber (SI-NCF) based on the Vernier effect. The Vernier effect is realized by introducing a single Sagnac interferometer (SI) with a similar free spectral range of SI-NCF. When the NCF is exposed to the external sucrose solution, the cladding state of NCF is changed, which induces the wavelength shift of the SI-NCF. The measured sucrose concentration sensitivity of a single SI-NCF is 2.97 nm/M, and the sensitivity can be improved to -13.84 nm/M with the assistance of the Vernier effect, which is 4.66 times of the single SI-NCF. The sensor has the advantages of high sensitivity, easy-fabrication and cost-effectiveness which can be applied in the field of the food industry, chemistry and agriculture.

Epsilon negative-based, broadband single-polarization single-mode hollow core anti-resonant photonic crystal fiber

A broadband single-polarization single-mode (SPSM) hollow core anti-resonant photonic crystal fiber (HC-ARPCF) is proposed and analyzed by the finite element method in this paper. The HC-ARPCF design consisted of outer semicircular cladding tubes and inner circular cladding tubes. The SPSM behavior is achieved through controlling the effective material absorption loss (EML) by loading epsilon negative (ENG) material in the selected semicircular cladding tubes. Optimization of the configuration parameters is conducted to yield a large loss difference (LD) between one of the two orthogonally polarized fundamental modes and all the other unwanted modes. Therefore, only one desired mode will exist after a proper propagation distance, i.e., SPSM guidance. Specially, the optimal design provides a 288 nm (from 1408 nm to 1676 nm and from 1680 nm to 1700 nm) bandwidth in terms of 40 dB/m minimum LD (MLD) and 168 nm (from 1452 nm to 1620 nm) bandwidth in terms of 100 dB/m MLD. Furthermore, this fiber also exhibits a large effective mode area and near-zero dispersion properties over the entire operation bandwidth. The proposed HC-ARPCF may find its applications in polarization maintaining and high-power laser systems.

Temperature-independent ultra-sensitive refractive index sensor based on hollow-core silica tubes and tapers

We demonstrate a simple and ultra-sensitive refractive index (RI) sensor using a hollow-core silica tube (HCST) sandwiched between an up-taper and a down-taper in single mode fibers (SMF). According to our theoretical analysis, the interference spectrum comes from a combination of a three-beam multi-mode interference and anti-resonance effects. RI sensing will affect the mode interference. By demodulating the fringe contrast of the interference spectra, an ultrahigh sensitivity of -120.18 dB/RIU is achieved, implying a RI resolution of ∼ 8×10^-6 in the RI range from 1.35 to 1.43. What's more, the sensor has great temperature insensitivity of -0.0085 dB/°C, indicating an extremely low cross sensitivity of 7×10^-5 RIU/°C, which further benefits its practical application. The proposed configuration does not require special fiber or fabrication technique. In addition, the sensor's other merits such as simple and compact structure and ease offabrication offer the potential in biochemical sensing applications.

Trends in the Implementation of Advanced Plasmonic Materials in Optical Fiber Sensors (2010–2020)

In recent years, the interaction between light and metallic films have been proven to be a highly powerful tool for optical sensing applications. We have witnessed the development of highly sensitive commercial devices based on Surface Plasmon Resonances. There has been continuous effort to integrate this plasmonic sensing technology using micro and nanofabrication techniques with the optical fiber sensor world, trying to get better, smaller and cost-effective high performance sensing solutions. In this work, we present a review of the latest and more relevant scientific contributions to the optical fiber sensors field using plasmonic materials over the last decade. The combination of optical fiber technology with metallic micro and nanostructures that allow plasmonic interactions have opened a complete new and promising field of study. We review the main advances in the integration of such metallic micro/nanostructures onto the optical fibers, discuss the most promising fabrication techniques and show the new trends in physical, chemical and biological sensing applications.

Preparation and Application of Metal Nanoparticals Elaborated Fiber Sensors

In recent years, surface plasmon resonance devices (SPR, or named plamonics) have attracted much more attention because of their great prospects in breaking through the optical diffraction limit and developing new photons and sensing devices. At the same time, the combination of SPR and optical fiber promotes the development of the compact micro-probes with high-performance and the integration of fiber and planar waveguide. Different from the long-range SPR of planar metal nano-films, the local-SPR (LSPR) effect can be excited by incident light on the surface of nano-scaled metal particles, resulting in local enhanced light field, i.e., optical hot spot. Metal nano-particles-modified optical fiber LSPR sensor has high sensitivity and compact structure, which can realize the real-time monitoring of physical parameters, environmental parameters (temperature, humidity), and biochemical molecules (pH value, gas-liquid concentration, protein molecules, viruses). In this paper, both fabrication and application of the metal nano-particles modified optical fiber LSPR sensor probe are reviewed, and its future development is predicted.