Robust and Accurate Capture of Human Joint Pose Using an Inertial Sensor

A Novel IMU-Based System for Work-Related Musculoskeletal Disorders Risk Assessment

This study introduces a novel wearable Inertial Measurement Unit (IMU)-based system for an objective and comprehensive assessment of Work-Related Musculoskeletal Disorders (WMSDs), thus enhancing workplace safety. The system integrates wearable technology with a user-friendly interface, providing magnetometer-free orientation estimation, joint angle measurements, and WMSDs risk evaluation. Tested in a cable manufacturing facility, the system was evaluated with ten female employees. The evaluation involved work cycle identification, inter-subject comparisons, and benchmarking against standard WMSD risk assessments like RULA, REBA, Strain Index, and Rodgers Muscle Fatigue Analysis. The evaluation demonstrated uniform joint patterns across participants (ICC=0.72±0.23) and revealed a higher occurrence of postures warranting further investigation, which is not easily detected by traditional methods such as RULA. The experimental results showed that the proposed system's risk assessments closely aligned with the established methods and enabled detailed and targeted risk assessments, pinpointing specific bodily areas for immediate ergonomic interventions. This approach not only enhances the detection of ergonomic risks but also supports the development of personalized intervention strategies, addressing common workplace issues such as tendinitis, low back pain, and carpal tunnel syndrome. The outcomes highlight the system's sensitivity and specificity in identifying ergonomic hazards. Future efforts should focus on broader validation and exploring the relative influence of various WMSDs risk factors to refine risk assessment and intervention strategies for improved applicability in occupational health.

Wearable Sensor Systems for Fall Risk Assessment: A Review

Fall risk assessment and fall detection are crucial for the prevention of adverse and long-term health outcomes. Wearable sensor systems have been used to assess fall risk and detect falls while providing additional meaningful information regarding gait characteristics. Commonly used wearable systems for this purpose are inertial measurement units (IMUs), which acquire data from accelerometers and gyroscopes. IMUs can be placed at various locations on the body to acquire motion data that can be further analyzed and interpreted. Insole-based devices are wearable systems that were also developed for fall risk assessment and fall detection. Insole-based systems are placed beneath the sole of the foot and typically obtain plantar pressure distribution data. Fall-related parameters have been investigated using inertial sensor-based and insole-based devices include, but are not limited to, center of pressure trajectory, postural stability, plantar pressure distribution and gait characteristics such as cadence, step length, single/double support ratio and stance/swing phase duration. The acquired data from inertial and insole-based systems can undergo various analysis techniques to provide meaningful information regarding an individual's fall risk or fall status. By assessing the merits and limitations of existing systems, future wearable sensors can be improved to allow for more accurate and convenient fall risk assessment. This article reviews inertial sensor-based and insole-based wearable devices that were developed for applications related to falls. This review identifies key points including spatiotemporal parameters, biomechanical gait parameters, physical activities and data analysis methods pertaining to recently developed systems, current challenges, and future perspectives.

Motion Tracking Algorithms Based on Wearable Inertial Sensor: A Focus on Shoulder

Shoulder Range of Motion (ROM) has been studied with several devices and methods in recent years. Accurate tracking and assessment of shoulder movements could help us to understand the pathogenetic mechanism of specific conditions in quantifying the improvements after rehabilitation. The assessment methods can be classified as subjective and objective. However, self-reported methods are not accurate, and they do not allow the collection of specific information. Therefore, developing measurement devices that provide quantitative and objective data on shoulder function and range of motion is important. A comprehensive search of PubMed and IEEE Xplore was conducted. The sensor fusion algorithm used to analyze shoulder kinematics was described in all studies involving wearable inertial sensors. Eleven articles were included. The Quality Assessment of Diagnostic Accuracy Studies-2 was used to assess the risk of bias (QUADAS-2). The finding showed that the Kalman filter and its variants UKF and EKF are used in the majority of studies. Alternatives based on complementary filters and gradient descent algorithms have been reported as being more computationally efficient. Many approaches and algorithms have been developed to solve this problem. It is useful to fuse data from different sensors to obtain a more accurate estimation of the 3D position and 3D orientation of a body segment. The sensor fusion technique makes this integration reliable. This systematic review aims to redact an overview of the literature on the sensor fusion algorithms used for shoulder motion tracking.

A Sensor Fusion Based Nonholonomic Wheeled Mobile Robot for Tracking Control

In this paper, a detail design procedure of the real-time trajectory tracking for the nonholonomic wheeled mobile robot (NWMR) is proposed. A 9-axis micro electro-mechanical systems (MEMS) inertial measurement unit (IMU) sensor is used to measure the posture of the NWMR, the position information of NWMR and the hand-held device are acquired by global positioning system (GPS) and then transmit via radio frequency (RF) module. In addition, in order to avoid the gimbal lock produced by the posture computation from Euler angles, the quaternion is utilized to compute the posture of the NWMR. Furthermore, the Kalman filter is used to filter out the readout noise of the GPS and calculate the position of NWMR and then track the object. The simulation results show the posture error between the NWMR and the hand-held device can converge to zero after 3.928 seconds for the dynamic tracking. Lastly, the experimental results show the validation and feasibility of the proposed results.

Wearable systems for shoulder kinematics assessment: a systematic review

BACKGROUND

Wearable sensors are acquiring more and more influence in diagnostic and rehabilitation field to assess motor abilities of people with neurological or musculoskeletal impairments. The aim of this systematic literature review is to analyze the wearable systems for monitoring shoulder kinematics and their applicability in clinical settings and rehabilitation.

METHODS

A comprehensive search of PubMed, Medline, Google Scholar and IEEE Xplore was performed and results were included up to July 2019. All studies concerning wearable sensors to assess shoulder kinematics were retrieved.

RESULTS

Seventy-three studies were included because they have fulfilled the inclusion criteria. The results showed that magneto and/or inertial sensors are the most used. Wearable sensors measuring upper limb and/or shoulder kinematics have been proposed to be applied in patients with different pathological conditions such as stroke, multiple sclerosis, osteoarthritis, rotator cuff tear. Sensors placement and method of attachment were broadly heterogeneous among the examined studies.

CONCLUSIONS

Wearable systems are a promising solution to provide quantitative and meaningful clinical information about progress in a rehabilitation pathway and to extrapolate meaningful parameters in the diagnosis of shoulder pathologies. There is a strong need for development of this novel technologies which undeniably serves in shoulder evaluation and therapy.

Monitoring Methods of Human Body Joints: State-of-the-Art and Research Challenges

The world's population is aging: the expansion of the older adult population with multiple physical and health issues is now a huge socio-economic concern worldwide. Among these issues, the loss of mobility among older adults due to musculoskeletal disorders is especially serious as it has severe social, mental and physical consequences. Human body joint monitoring and early diagnosis of these disorders will be a strong and effective solution to this problem. A smart joint monitoring system can identify and record important musculoskeletal-related parameters. Such devices can be utilized for continuous monitoring of joint movements during the normal daily activities of older adults and the healing process of joints (hips, knees or ankles) during the post-surgery period. A viable monitoring system can be developed by combining miniaturized, durable, low-cost and compact sensors with the advanced communication technologies and data processing techniques. In this study, we have presented and compared different joint monitoring methods and sensing technologies recently reported. A discussion on sensors' data processing, interpretation, and analysis techniques is also presented. Finally, current research focus, as well as future prospects and development challenges in joint monitoring systems are discussed.

Magnetometer-Based Drift Correction During Rest inIMU Arm Motion Tracking

Real-time motion capture of the human arm in the home environment has many usecases, such as video game and therapy applications. The required tracking can be based onoff-the-shelf Inertial Measurement Units (IMUs) with integrated three-axis accelerometers, gyroscopes,and magnetometers. However, this usually requires a homogeneous magnetic field to correctfor orientation drift, which is often not available inside buildings. In this paper, RPMC (RestPose Magnetometer-based drift Correction), a novel method that is robust to long term drift inenvironments with inhomogeneous magnetic fields, is presented. The sensor orientation is estimatedby integrating the angular velocity measured by the gyroscope and correcting drift around the pitchand roll axes with the acceleration information. This commonly leads to short term drift aroundthe gravitational axis. Here, during the calibration phase, the local magnetic field direction for eachsensor, and its orientation relative to the inertial frame, are recorded in a rest pose. It is assumed thatarm movements in free space are exhausting and require regular rest. A set of rules is used to detectwhen the user has returned to the rest pose, to then correct for the drift that has occurred with themagnetometer. Optical validations demonstrated accurate (root mean square error RMS = 6.1), lowlatency (61 ms) tracking of the user's wrist orientation, in real time, for a full hour of arm movements.The reduction in error relative to three alternative methods implemented for comparison was between82.5% and 90.7% for the same movement and environment. Therefore, the proposed arm trackingmethod allows for the correction of orientation drift in an inhomogeneous magnetic field by exploitingthe user's need for frequent rest.