Classification of sleep stages in infants: a neuro fuzzy approach

Time-frequency analysis and fuzzy-based detection of heat-stressed sleep EEG spectra

Nowadays, sleep disorders are contemplated as the major issue in the human lives. The current work aims at extraction of time-frequency information from recorded dataset and provides an efficient sleep stage detection method. Recordings of brain signal namely electroencephalogram (EEG), electrooculogram (EOG), and electromyogram (EMG) were carried out under defined clinical condition for the classification of sleep EEG. Subsequent upon the extraction of various features from the raw EEG data, neuro-fuzzy system is trained to classify the sleep stages into three major classes namely awake, slow wave sleep (SWS), and rapid eye movement sleep (REM). This classification would enable medical professionals to diagnose sleep related disorders accurately. The results obtained clearly indicate that the mean performance for SWS stage is profound as compared to REM and awake stage. Specificity and sensitivity of the proposed method are obtained as 95.4% and 80%, respectively. The average accuracy of the system employing neuro-fuzzy approach is found to be 90.6% in which SWS stage was best detected among the other stages of sleep EEG.Graphical abstract.

COMBINATION OF HETEROGENEOUS EEG FEATURE EXTRACTION METHODS AND STACKED SEQUENTIAL LEARNING FOR SLEEP STAGE CLASSIFICATION

This work proposes a methodology for sleep stage classification based on two main approaches: the combination of features extracted from electroencephalogram (EEG) signal by different extraction methods, and the use of stacked sequential learning to incorporate predicted information from nearby sleep stages in the final classifier. The feature extraction methods used in this work include three representative ways of extracting information from EEG signals: Hjorth features, wavelet transformation and symbolic representation. Feature selection was then used to evaluate the relevance of individual features from this set of methods. Stacked sequential learning uses a second-layer classifier to improve the classification by using previous and posterior first-layer predicted stages as additional features providing information to the model. Results show that both approaches enhance the sleep stage classification accuracy rate, thus leading to a closer approximation to the experts' opinion.

Automatic detection of the wake and stage 1 sleep stages using the EEG sub-epoch approach

Studies by Rechtschaffen and Kales (R&K), rely on 30-sec epochs to score sleep stages. In this paper, we introduce a new approach based on three consecutive and non-consecutive 6-sec sub-epochs for the detection of the wake stage and stage 1 sleep. The Relative Spectral Energy Band (RSEB) is used as a feature extraction from the electroencephalographic (EEG) signal. Spectral estimation is performed using non-parametric and parametric methods. We then compared the performance of the conventional 30-sec epochs with the three consecutive and non-consecutive 6-sec epochs. The outcomes of this study showed that while the accuracy varies between subjects, the non-parametric method proved to be more effective with stage 1 sleep detection and the parametric method was more effective for wake stage detection. The non-consecutive sub-epoch method was more effective and consecutive method was least effective in non-parametric stage 1 detection. Alternatively, the 30-second epoch method was most effective for parametric wake stage detection.

Automated detection of apnea/hypopnea events in healthy children polysomnograms: preliminary results

A methodology to detect sleep apnea/hypopnea events in the respiratory signals of polysomnographic recordings is presented. It applies empirical mode decomposition (EMD), Hilbert-Huang transform (HHT), fuzzy logic and signal preprocessing techniques for feature extraction, expert criteria and context analysis. EMD, HHT and fuzzy logic are used for artifact detection and preliminary detection of respiration signal zones with significant variations in the amplitude of the signal; feature extraction, expert criteria and context analysis are used to characterize and validate the respiratory events. An annotated database of 30 all-night polysomnographic recordings, acquired from 30 healthy ten-year-old children, was divided in a training set of 15 recordings (485 sleep apnea/hypopnea events), a validation set of five recordings (109 sleep apnea/hypopnea events), and a testing set of ten recordings (281 sleep apnea/hypopnea events). The overall detection performance on the testing data set was 89.7% sensitivity and 16.3% false-positive rate. The next step is to include discrimination among apneas, hypopneas and respiratory pauses.

Application of recurrence quantification analysis to automatically estimate infant sleep states using a single channel of respiratory data

Previous work has identified that non-linear variables calculated from respiratory data vary between sleep states, and that variables derived from the non-linear analytical tool recurrence quantification analysis (RQA) are accurate infant sleep state discriminators. This study aims to apply these discriminators to automatically classify 30 s epochs of infant sleep as REM, non-REM and wake. Polysomnograms were obtained from 25 healthy infants at 2 weeks, 3, 6 and 12 months of age, and manually sleep staged as wake, REM and non-REM. Inter-breath interval data were extracted from the respiratory inductive plethysmograph, and RQA applied to calculate radius, determinism and laminarity. Time-series statistic and spectral analysis variables were also calculated. A nested cross-validation method was used to identify the optimal feature subset, and to train and evaluate a linear discriminant analysis-based classifier. The RQA features radius and laminarity and were reliably selected. Mean agreement was 79.7, 84.9, 84.0 and 79.2 % at 2 weeks, 3, 6 and 12 months, and the classifier performed better than a comparison classifier not including RQA variables. The performance of this sleep-staging tool compares favourably with inter-human agreement rates, and improves upon previous systems using only respiratory data. Applications include diagnostic screening and population-based sleep research.

Automated detection of rapid eye movements in children

We present an automated multiple-step tool to identify Rapid Eye Movements (REMs) in the polysomnogram, based on modeling expert criteria. It begins by identifying the polysomnogram segments compatible with REMs presence. On these segments, high-energy REMs are identified. Then, vicinity zones around those REMs are defined, and lesser-energy REMs are sought in these vicinities. This strategy has the advantage that it can detect lesser-energy REMs without increasing much the false positive detections. Signal processing, feature extraction, and fuzzy logic tools are used to achieve the goal. The tool was trained and validated on a database consisting of 20 all-night polysomnogram recordings (160 hr) of healthy ten-year-old children. Preliminary results on the validation set show 85.5% sensitivity and a false positive rate of 16.2%. Our tool works on complete polysomnogram recordings, without the need of preprocessing, prior knowledge of the hypnogram, or noise-free segments selection.

Multivariate analysis of full-term neonatal polysomnographic data

INTRODUCTION

Polysomnography (PSG) is one of the most important noninvasive methods for studying maturation of the child brain. Sleep in infants is significantly different from sleep in adults. This paper addresses the problem of computer analysis of neonatal polygraphic signals.

METHODS

We applied methods designed for differentiating three important neonatal behavioral states: quiet sleep, active sleep, and wakefulness. The proportion of these states is a significant indicator of the maturity of the newborn brain in clinical practice. In this study, we used data provided by the Institute for Care of Mother and Child, Prague (12 newborn infants of similar postconceptional age). The data were scored by an experienced physician to four states (wake, quiet sleep, active sleep, movement artifact). For accurate classification, it was necessary to determine the most informative features. We used a method based on power spectral density (PSD) applied to each EEG channel. We also used features derived from electrooculogram (EOG), electromyogram (EMG), ECG, and respiration [pneumogram (PNG)] signals. The most informative feature was the measure of regularity of respiration from the PNG signal. We designed an algorithm for interpreting these characteristics. This algorithm was based on Markov models.

RESULTS

The results of automatic detection of sleep states were compared to the "sleep profiles" determined visually. We evaluated both the success rate and the true positive rate of the classification, and statistically significant agreement of the two scorings was found. Two variants, for learning and for testing, were applied, namely learning from the data of all 12 newborns and tenfold cross-validation, and learning from the data of 11 newborns and testing on the data from the 12th newborn. We utilized information obtained from several biological signals (EEG, ECG, PNG, EMG, EOG) for our final classification. We reached the final success rate of 82.5%. The true positive rate was 81.8% and the false positive rate was 6.1%.

DISCUSSION

The most important step in the whole process is feature extraction and feature selection. In this process, we used visualization as an additional tool that helped us to decide which features to select. Proper selection of features may significantly influence the success rate of the classification. We made a visual comparison of the computed features with the manual scoring provided by the expert. A hidden Markov model was used for classification. The advantage of this model is that it determines the future behavior of the process by its present state. In this way, it preserves information about temporal development.

An open-source hardware and software system for acquisition and real-time processing of electrophysiology during high field MRI

Simultaneous recording of electrophysiology and functional magnetic resonance imaging (fMRI) is a technique of growing importance in neuroscience. Rapidly evolving clinical and scientific requirements have created a need for hardware and software that can be customized for specific applications. Hardware may require customization to enable a variety of recording types (e.g., electroencephalogram, local field potentials, or multi-unit activity) while meeting the stringent and costly requirements of MRI safety and compatibility. Real-time signal processing tools are an enabling technology for studies of learning, attention, sleep, epilepsy, neurofeedback, and neuropharmacology, yet real-time signal processing tools are difficult to develop. We describe an open-source system for simultaneous electrophysiology and fMRI featuring low-noise (<0.6microV p-p input noise), electromagnetic compatibility for MRI (tested up to 7T), and user-programmable real-time signal processing. The hardware distribution provides the complete specifications required to build an MRI-compatible electrophysiological data acquisition system, including circuit schematics, print circuit board (PCB) layouts, Gerber files for PCB fabrication and robotic assembly, a bill of materials with part numbers, data sheets, and vendor information, and test procedures. The software facilitates rapid implementation of real-time signal processing algorithms. This system has been used in human EEG/fMRI studies at 3 and 7T examining the auditory system, visual system, sleep physiology, and anesthesia, as well as in intracranial electrophysiological studies of the non-human primate visual system during 3T fMRI, and in human hyperbaric physiology studies at depths of up to 300 feet below sea level.

Sleep versus wake classification from heart rate variability using computational intelligence: consideration of rejection in classification models

Reliability of classification performance is important for many biomedical applications. A classification model which considers reliability in the development of the model such that unreliable segments are rejected would be useful, particularly, in large biomedical data sets. This approach is demonstrated in the development of a technique to reliably determine sleep and wake using only the electrocardiogram (ECG) of infants. Typically, sleep state scoring is a time consuming task in which sleep states are manually derived from many physiological signals. The method was tested with simultaneous 8-h ECG and polysomnogram (PSG) determined sleep scores from 190 infants enrolled in the collaborative home infant monitoring evaluation (CHIME) study. Learning vector quantization (LVQ) neural network, multilayer perceptron (MLP) neural network, and support vector machines (SVMs) are tested as the classifiers. After systematic rejection of difficult to classify segments, the models can achieve 85%-87% correct classification while rejecting only 30% of the data. This corresponds to a Kappa statistic of 0.65-0.68. With rejection, accuracy improves by about 8% over a model without rejection. Additionally, the impact of the PSG scored indeterminate state epochs is analyzed. The advantages of a reliable sleep/wake classifier based only on ECG include high accuracy, simplicity of use, and low intrusiveness. Reliability of the classification can be built directly in the model, such that unreliable segments are rejected.

Dual approach for automated sleep spindles detection within EEG background activity in infant polysomnograms

An automated system for sleep spindles detection within EEG background activity, combining two different approaches, is presented. The first approach applies detection criteria on the sigma-band filtered EEG signal, including fuzzy thresholds. The second approach mimics an expert's procedure. A sleep spindle detection is validated if both approaches agree. The method was applied on a testing set, consisting of continuous sleep recordings of two patients, totaling 1132 epochs (pages). A total of 803 sleep spindles events were marked by the experts. Results showed an 87.7% agreement between the detection system and the medical experts.

Extracting Fuzzy Rules From Polysomnographic Recordings for Infant Sleep Classification

A neuro-fuzzy classifier (NFC) of sleep-wake states and stages has been developed for healthy infants of ages 6 mo and onward. The NFC takes five input patterns previously identified on 20-s epochs from polysomnographic recordings and assigns them to one out of five possible classes: Wakefulness, REM-Sleep, Non-REM Sleep Stage 1, Stage 2, and Stage 3-4. The definite criterion for a sleep state or stage to be established is duration of at least 1 min. The data set consisted of a total of 14 continuous recordings of naturally occurring naps (average duration: 143 +/- 39 min), corresponding to a total of 6021 epochs. They were divided in a training, a validation and a test set with 7, 2, and 5 recordings, respectively. During supervised training, the system determined the fuzzy concepts associated to the inputs and the rules required for performing the classification, extracting knowledge from the training set, and pruning nonrelevant rules. Results on an independent test set achieved 83.9 +/- 0.4% of expert agreement. The fuzzy rules obtained from the training examples without a priori information showed a high level of coincidence with the crisp rules stated by the experts, which are based on internationally accepted criteria. These results show that the NFC can be a valuable tool for implementing an automated sleep-wake classification system.