CMOS Ultralow Power Brain Signal Acquisition Front-Ends: Design and Human Testing

Simulation-Informed Power Budget Estimate of a Fully-Implantable Brain-Computer Interface

This study aims to estimate the maximum power consumption that guarantees a thermally safe operation for a titanium-enclosed chest wall unit (CWU) subcutaneously implanted in the pre-pectoral area. This unit is a central piece of an envisioned fully-implantable bi-directional brain-computer interface (BD-BCI). To this end, we created a thermal simulation model using the finite element method implemented in COMSOL. We also performed a sensitivity analysis to ensure that our predictions were robust against the natural variation of physiological and environmental parameters. Based on this analysis, we predict that the CWU can consume between 378 and 538 mW of power without raising the surrounding tissue's temperature above the thermal safety threshold of 2 ∘ C. This power budget should be sufficient to power all of the CWU's basic functionalities, which include training the decoder, online decoding, wireless data transmission, and cortical stimulation. This power budget assessment provides an important specification for the design of a CWU-an integral part of a fully-implantable BD-BCI system.

Amplifiers in Biomedical Engineering: A Review from Application Perspectives

Continuous monitoring and treatment of various diseases with biomedical technologies and wearable electronics has become significantly important. The healthcare area is an important, evolving field that, among other things, requires electronic and micro-electromechanical technologies. Designed circuits and smart devices can lead to reduced hospitalization time and hospitals equipped with high-quality equipment. Some of these devices can also be implanted inside the body. Recently, various implanted electronic devices for monitoring and diagnosing diseases have been presented. These instruments require communication links through wireless technologies. In the transmitters of these devices, power amplifiers are the most important components and their performance plays important roles. This paper is devoted to collecting and providing a comprehensive review on the various designed implanted amplifiers for advanced biomedical applications. The reported amplifiers vary with respect to the class/type of amplifier, implemented CMOS technology, frequency band, output power, and the overall efficiency of the designs. The purpose of the authors is to provide a general view of the available solutions, and any researcher can obtain suitable circuit designs that can be selected for their problem by reading this survey.

Power Budget of a Skull Unit in a Fully-Implantable Brain-Computer Interface: Bio-Heat Model

The aim of this study is to estimate the maximum power consumption that guarantees the thermal safety of a skull unit (SU). The SU is part of a fully-implantable bi-directional brain computer-interface (BD-BCI) system that aims to restore walking and leg sensation to those with spinal cord injury (SCI). To estimate the SU power budget, we created a bio-heat model using the finite element method (FEM) implemented in COMSOL. To ensure that our predictions were robust against the natural variation of the model's parameters, we also performed a sensitivity analysis. Based on our simulations, we estimated that the SU can nominally consume up to 70 mW of power without raising the surrounding tissues' temperature above the thermal safety threshold of 1°C. When considering the natural variation of the model's parameters, we estimated that the power budget could range between 47 and 81 mW. This power budget should be sufficient to power the basic operations of the SU, including amplification, serialization and A/D conversion of the neural signals, as well as control of cortical stimulation. Determining the power budget is an important specification for the design of the SU and, in turn, the design of a fully-implantable BD-BCI system.

Thermal Analysis of a Skull Implant in Brain-Computer Interfaces

The goal of this study is to estimate the thermal impact of a titanium skull unit (SU) implanted on the exterior aspect of the human skull. We envision this unit to house the front-end of a fully implantable electrocorticogram (ECoG)-based bi-directional (BD) brain-computer interface (BCI). Starting from the bio-heat transfer equation with physiologically and anatomically constrained tissue parameters, we used the finite element method (FEM) implemented in COMSOL to build a computational model of the SU's thermal impact. Based on our simulations, we predicted that the SU could consume up to 75 mW of power without raising the temperature of surrounding tissues above the safe limits (increase in temperature of 1°C). This power budget by far exceeds the power consumption of our front-end prototypes, suggesting that this design can sustain the SU's ability to record ECoG signals and deliver cortical stimulation. These predictions will be used to further refine the existing SU design and inform the design of future SU prototypes.

An Energy-Efficient CMOS Dual-Mode Array Architecture for High-Density ECoG-Based Brain-Machine Interfaces

This article presents an energy-efficient electrocorticography (ECoG) array architecture for fully-implantable brain machine interface systems. A novel dual-mode analog signal processing method is introduced that extracts neural features from high- γ band (80-160 Hz) at the early stages of signal acquisition. Initially, brain activity across the full-spectrum is momentarily observed to compute the feature weights in the digital back-end during full-band mode operation. Subsequently, these weights are fed back to the front-end and the system reverts to base-band mode to perform feature extraction. This approach utilizes a distinct optimized signal pathway based on power envelope extraction, resulting in 1.72× power reduction in the analog blocks and up to 50× potential power savings for digitization and processing (implemented off-chip in this article). A prototype incorporating a 32-channel ultra-low power signal acquisition front-end is fabricated in 180 nm CMOS process with 0.8 V supply. This chip consumes 1.05  μW (0.205  μW for feature extraction only) power and occupies 0.245 [Formula: see text] die area per channel. The chip measurement shows better than 76.5-dB common-mode rejection ratio (CMRR), 4.09 noise efficiency factor (NEF), and 10.04 power efficiency factor (PEF). In-vivo human tests have been carried out with electroencephalography and ECoG signals to validate the performance and dual-mode operation in comparison to commercial acquisition systems.

Low-Power High-Input-Impedance EEG Signal Acquisition SoC With Fully Integrated IA and Signal-Specific ADC for Wearable Applications

This paper presents a low-power high-input-impedance analog-front-end (AFE) design including an instrumentational-amplifier (IA) and a neural-signal-specific ADC (NSS-ADC) for continuous acquisition of electroencephalography (EEG) signals. In the proposed AFE, low-voltage low-power design techniques are used to reduce the power consumption of the whole system. Furthermore, by utilizing the proposed NSS-ADC, high-amplitude EEG spikes, which convey more important information, are converted with higher resolutions, while the background-noise (B-Noise) of the EEG signal is converted with the lowest resolution. Hence, when the NSS-ADC enters the inactive region, the resolution- and DAC- controlling-units (RCU and DCU) set the analog and digital components of the NSS-ADC into off mode, which leads to power reduction. Based on measurement results, the AFE consumes a power of 3.7 μW under the sampling rate of 20 KS/s. In the proposed AFE, to avoid signal attenuation, active-electrodes (AEs) are utilized to enhance the input impedance of the AFE up to 102 GΩ and 5.2 GΩ at 1 Hz and 20 Hz, respectively. In addition, by using circuit-design techniques the input-referred-noise is reduced as low as 1.5 μV_rms over 0.5-1.2 kHz. Finally, by using a transconductance-driven-right-leg (TDRL) and a common-mode-feedback (CMFB) blocks, a common-mode-rejection-ratio (CMRR) of 108 dB is achieved.

A benchtop system to assess the feasibility of a fully independent and implantable brain-machine interface

OBJECTIVE

State-of-the-art invasive brain-machine interfaces (BMIs) have shown significant promise, but rely on external electronics and wired connections between the brain and these external components. This configuration presents health risks and limits practical use. These limitations can be addressed by designing a fully implantable BMI similar to existing FDA-approved implantable devices. Here, a prototype BMI system whose size and power consumption are comparable to those of fully implantable medical devices was designed and implemented, and its performance was tested at the benchtop and bedside.

APPROACH

A prototype of a fully implantable BMI system was designed and implemented as a miniaturized embedded system. This benchtop analogue was tested in its ability to acquire signals, train a decoder, perform online decoding, wirelessly control external devices, and operate independently on battery. Furthermore, performance metrics such as power consumption were benchmarked.

MAIN RESULTS

An analogue of a fully implantable BMI was fabricated with a miniaturized form factor. A patient undergoing epilepsy surgery evaluation with an electrocorticogram (ECoG) grid implanted over the primary motor cortex was recruited to operate the system. Seven online runs were performed with an average binary state decoding accuracy of 87.0% (lag optimized, or 85.0% at fixed latency). The system was powered by a wirelessly rechargeable battery, consumed  ∼150 mW, and operated for  >60 h on a single battery cycle.

SIGNIFICANCE

The BMI analogue achieved immediate and accurate decoding of ECoG signals underlying hand movements. A wirelessly rechargeable battery and other supporting functions allowed the system to function independently. In addition to the small footprint and acceptable power and heat dissipation, these results suggest that fully implantable BMI systems are feasible.