A Noninvasive Miniaturized Transcutaneous Oxygen Monitor

Recent Technologies for Transcutaneous Oxygen and Carbon Dioxide Monitoring

The measurement of partial pressures of oxygen (O2) and carbon dioxide (CO2) is fundamental for evaluating a patient's conditions in clinical practice. There are many ways to retrieve O2/CO2 partial pressures and concentrations. Arterial blood gas (ABG) analysis is the gold standard technique for such a purpose, but it is invasive, intermittent, and potentially painful. Among all the alternative methods for gas monitoring, non-invasive transcutaneous O2 and CO2 monitoring has been emerging since the 1970s, being able to overcome the main drawbacks of ABG analysis. Clark and Severinghaus electrodes enabled the breakthrough for transcutaneous O2 and CO2 monitoring, respectively, and in the last twenty years, many innovations have been introduced as alternatives to overcome their limitations. This review reports the most recent solutions for transcutaneous O2 and CO2 monitoring, with a particular consideration for wearable measurement systems. Luminescence-based electronic paramagnetic resonance and photoacoustic sensors are investigated. Optical sensors appear to be the most promising, giving fast and accurate measurements without the need for frequent calibrations and being suitable for integration into wearable measurement systems.

A Transcutaneous Carbon Dioxide Monitor Based on Time-Domain Dual Lifetime Referencing

The partial pressure of arterial carbon dioxide plays a critical role in assessing the acid-base and respiratory status of the human body. Typically, this measurement is invasive and can only be taken momentarily when an arterial blood sample is drawn. Transcutaneous monitoring is a noninvasive surrogate method that provides a continuous measure of arterial carbon dioxide. Unfortunately, current technology is limited to bedside instruments mainly used in intensive care units. We developed a first-of-its-kind miniaturized transcutaneous carbon dioxide monitor that utilizes a luminescence sensing film and a time-domain dual lifetime referencing method. Gas cell experiments confirmed the monitor's ability to accurately identify changes in the partial pressure of carbon dioxide within the clinically significant range. Compared to the luminescence intensity-based technique, the time-domain dual lifetime referencing method is less prone to measurement errors caused by changes in excitation strength, reducing the maximum error from  ∼ 40% to  ∼ 3% and resulting in more reliable readings. Additionally, we analyzed the sensing film by investigating its behavior under various confounding factors and its susceptibility to measurement drift. Finally, a human subject test demonstrated the effectiveness of the applied method in detecting even slight changes in transcutaneous carbon dioxide, as small as  ∼ 0.7%, during hyperventilation. The prototype, which consumes 30.1 mW of power, is a wearable wristband with compact dimensions of 37 mm× 32 mm.

Optimizing Transcutaneous Oxygen Measurement Sites on Humans

This study utilizes an optical method of transcutaneous oxygen sensing that has the potential to revolutionize at-home care. This technique is based on quenching the luminescence of a platinum porphyrin film. Since oxygen quenches luminescence, its lifetime is further measured to assess the partial pressure of transcutaneous oxygen diffusing through the skin. Unlike conventional transcutaneous oxygen monitors that use electrochemical sensors, the luminescence-based sensor allows the use of dry electrodes that do not require heating and reduce the risk of accidental skin irritations or burns. These properties not only improve patient safety but also allow the creation of miniature wearable transcutaneous oxygen sensors for continuous and accurate remote respiratory monitoring. To this end, it is critical to assess the efficiency of the wearable sensor by determining the optimal location for its placement on the body. Depending on the location on the body, physiological factors such as blood flow rate and skin thickness affect dermal perfusion of transcutaneous oxygen. In this work, four healthy volunteers participated in subject testing. We assessed each participant at the following locations: thumb, top of the wrist, forearm, thigh, and shin. All locations consistently reported accurate and reliable data. Among them, the thumb demonstrated shorter settling times and the most uniform luminescence lifetime values.

Incoherent Optical Fluctuation Flowmetry: A New Method for the Assessment of Foot Perfusion in Patients with Diabetes-Related Lower-Extremity Complications

(1) Background: To date, there are no studies evaluating the ability of the incoherent optical fluctuation flowmetry (IOFF) method to assess foot tissue perfusion. The aim of this study was to evaluate the correlation between perfusion values measured by IOFF and TcPO2 in patients with diabetes-related lower-extremity complications. (2) Methods: This was an observational, cross-sectional, two-center study. Diabetic patients with peripheral artery disease and/or diabetic foot ulcers were studied (n = 27, examinations were carried out on 54 legs). Perfusion in the foot tissues was assessed using TcPO2 (reference standard for this study) and the IOFF method. (3) Results: High correlation coefficients of all perfusion parameters measured by IOFF with TcPO2 (Rs 0.7 to 0.76) were shown. The study demonstrated that the IOFF method allows, with a sensitivity of 85.7% and a specificity of 90.0%, the identification of patients with a critical decrease in TcPO2 < 20 mmHg. (4) Conclusions: The high correlation of IOFF parameters with TcPO2 and the moderately high sensitivity and specificity in detecting patients with severe ischemia of foot tissues shows the promise of the method for assessing a tissue perfusion in patients with diabetes-related lower-extremity complications.

Quantitative Luminescence Photography of a Swellable Hydrogel Dressing with a Traffic-Light Response to Oxygen

Sensor-integrated wound dressings are emerging tools applicable to a wide variety of medical applications from emergency triage to at-home monitoring. Uncomfortable, unnecessary wound dressing changes may be avoided by providing quantitative insight into tissue characteristics related to wound healing such as tissue oxygenation, pH, and exudate/transudate volume. Here, a simple cost-effective methodology for quantifying oxygen and pH in a swellable hydrogel dressing using a single photograph is presented. The red and green luminescence of a novel dendritic polyamine Pt-porphyrin and fluorescein conjugate quantitatively responds to oxygen and pH, respectively, and enables robust sensing. The porphyrin conjugate, when combined with a four-arm star polyethylene glycol (PEG) amine polymer, rapidly crosslinks at room temperature with an N-hydroxysuccinimide (NHS)-PEG crosslinker to form a color-changing hydrogel dressing with tunable swelling capabilities applicable to a variety of wound environments. An inexpensive digital single-lens reflex (DSLR) camera modified with bandpass filters captures the hydrogel luminescence using simple macroscopic photography, and conversion to HSB colorspace allows for intensity-independent image analysis of the hydrogels' dual modality response. The hydrogel formulation exhibits a robust and validated visible red-orange-green "traffic light" spectrum in response to oxygen changes, regardless of swelling state, pH, or autofluorescence from skin, thereby enabling the clinician friendly naked-eye feedback.

A 1.8 V Low-Power Low-Noise High Tunable Gain TIA for CMOS Integrated Optoelectronic Biomedical Applications

This paper reports on a novel solution for a transimpedance amplifier (TIA) specifically designed as an analog conditioning circuit for low-voltage, low-power, wearable, portable and implantable optoelectronic integrated sensor systems in biomedical applications. The growing use of sensors in all fields of industry, biomedicine, agriculture, environment analysis, workplace security and safety, needs the development of small sensors with a reduced number of electronic components to be easily integrated in the standard CMOS technology. Especially in biomedicine applications, reduced size sensor systems with small power consumption are of paramount importance to make them non-invasive, comfortable tools for patients to be continuously monitored even with personalized therapeutics and/or that can find autonomous level of life using prosthetics. The proposed new TIA architecture has been designed at transistor level in TSMC 0.18 μm standard CMOS technology with the aim to operate with nanoampere input pulsed currents that can be generated, for example, by Si photodiodes in optical sensor systems. The designed solution operates at 1.8 V single supply voltage with a maximum power consumption of about 36.1 μW and provides a high variable gain up to about 124 dBΩ (with fine- and coarse-tuning capabilities) showing wide bandwidth up to about 1.15 MHz and low-noise characteristics with a minimum noise floor level down to about 0.39 pA/Hz. The overall circuit is described in detail, and its main characteristics and performances have been analyzed by performing accurate post-layout simulations.