1
|
Trujillo-Romero CJ, Dionisio Merida J, Ramírez-Guzmán TJ, Martínez-Valdez R, Leija-Salas L, Vera-Hernández A, Rico-Martínez G, Flores-Cuautle JJA, Gutiérrez-Martínez J, Sacristán-Rock E. Thermal Evaluation of Multi-Antenna Systems Proposed to Treat Bone Tumors: Finite Element Analysis. SENSORS (BASEL, SWITZERLAND) 2022; 22:7604. [PMID: 36236709 PMCID: PMC9571680 DOI: 10.3390/s22197604] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/06/2022] [Revised: 09/28/2022] [Accepted: 10/05/2022] [Indexed: 06/16/2023]
Abstract
Microwave ablation is commonly used in soft tissue tumors, but its application in bone tumors has been barely analyzed. Antennas to treat bone tissue (~3 cm2), has been lately designed. Bone tumors at pathological stage T1 can reach 8 cm wide. An antenna cannot cover it; therefore, our goal is to evaluate the thermal performance of multi-antenna arrays. Linear, triangular, and square configurations of double slot (DS) and monopole (MTM) antennas were evaluated. A parametric study (finite element method), with variations in distance between antennas (ad) and bone thickness (bt) was implemented. Array feasibility was evaluated by SWR, ablated tissue volume, etc. The linear configuration with DS and MTM antennas showed SWR ≤ 1.6 for ad = 1 mm−15 mm and bt = 20 mm−40 mm, and ad = 10 mm−15 mm and bt = 25 mm−40 mm, respectively; the triangular showed SWR ≤ 1.5 for ad = 5 mm−15 mm and bt = 20 mm−40 mm and ad = 10 mm−15 mm and bt = 25 mm−40 mm. The square configuration (DS) generated SWR ≤ 1.5 for ad = 5 mm−20 mm and bt = 20 mm−40 mm, and the MTM, SWR ≤ 1.5 with ad = 10 mm and bt = 25 mm−40 mm. Ablated tissue was 4.65 cm3−10.46 cm3 after 5 min. According to treatment time and array configuration, maximum temperature and ablated tissue is modified. Bone tumors >3 cm3 can be treated by these antenna-arrays.
Collapse
Affiliation(s)
- Citlalli Jessica Trujillo-Romero
- Division of Medical Engineering Research, National Institute of Rehabilitation-LGII, Calz. México Xochimilco No. 289, Arenal de Guadalupe, Mexico City 14389, Mexico
| | - Juan Dionisio Merida
- Department of Electrical Engineering, Universidad Autonoma Metropolitana, UAM-Iztapalapa, Av. Ferrocarril San Rafael Atlixco, 186, Leyes de Reforma, Mexico City 09310, Mexico
| | - Texar Javier Ramírez-Guzmán
- Electrical Engineering Department, Bioelectronics Section, CINVESTAV-IPN, Instituto Politécnico Nacional 2508, San Pedro Zacatenco, Mexico City 07360, Mexico
| | - Raquel Martínez-Valdez
- Biomedical Engineering Program, Universidad Politécnica de Chiapas, Suchiapa 29150, Mexico
| | - Lorenzo Leija-Salas
- Electrical Engineering Department, Bioelectronics Section, CINVESTAV-IPN, Instituto Politécnico Nacional 2508, San Pedro Zacatenco, Mexico City 07360, Mexico
| | - Arturo Vera-Hernández
- Electrical Engineering Department, Bioelectronics Section, CINVESTAV-IPN, Instituto Politécnico Nacional 2508, San Pedro Zacatenco, Mexico City 07360, Mexico
| | - Genaro Rico-Martínez
- Bone Tumors Service, National Institute of Rehabilitation-LGII, Calz. México Xochimilco No. 289, Arenal de Guaudalupe, Mexico City 14389, Mexico
| | - José Jesús Agustín Flores-Cuautle
- CONACYT-National Technological Institute of Mexico/I.T. Orizaba, Posgraduate Studies and Research Division, Oriente 9, No. 852, Orizaba 94320, Mexico
| | - Josefina Gutiérrez-Martínez
- Division of Medical Engineering Research, National Institute of Rehabilitation-LGII, Calz. México Xochimilco No. 289, Arenal de Guadalupe, Mexico City 14389, Mexico
| | - Emilio Sacristán-Rock
- National Center for Research in Instrumentation and Medical Imaging, UAM-Iztapalapa, Av. Ferrocarril San Rafael Atlixco, 186, Leyes de Reforma, Mexico City 09310, Mexico
| |
Collapse
|
2
|
PINHEIRO CLEBERDASILVA. INFLUENCE OF THERMAL-ELECTRICAL PARAMETER COMBINATIONS ON THERMAL LESIONS OF RADIOFREQUENCY TUMOR ABLATION. J BIOL SYST 2017. [DOI: 10.1142/s0218339017500164] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
Abstract
Several studies have been conducted on the applicability of hyperthermia radiofrequency in the treatment of liver tumors. Many theoretical studies have reported the relevance of various physical parameters in terms of their efficacy in combating tumors and have analyzed the impact of these physical parameters on the temperature profile in the diseased tissue. Parameters such as thermal and electrical conductivities have been investigated during simulations of thermal ablation. Such parameters play an important role in the process of heat transfer in tissues. The purpose of this study is to predict the lesion volume, considering the inclusion of temperature dependence of thermal-electrical properties. This paper introduces a three-dimensional computational model that includes different comparative combinations of tissue thermal-electrical parameters as a mapping of temperature (such as thermal and electrical conductivities and specific heat). The finite-element method is employed for simulating hepatic radiofrequency ablation through the numerical solutions of the bioheat, Laplace, and Navier–Stokes equations. The results suggest that different combinations of tissue temperature-dependent parameters can significantly affect the computed lesion volume and that the temperature dependence of electrical conductivity has a major impact on the computed lesion volume and temperature distribution.
Collapse
Affiliation(s)
- CLEBER DA SILVA PINHEIRO
- Institute of Physics—University of Brasília (UnB), Campus Universitário Darcy Ribeiro, Asa Norte, CEP 70919-970, Brasília/Distrito Federal-DF, Brazil
- Department of Biological Sciences, University Center of Brasilia (UniCEUB), Asa Norte, SEPN 707/907-University Center, CEP 70790-075, Brasília/Distrito Federal-DF, Brazil
| |
Collapse
|
3
|
Phasukkit P, Sanpanich A, Tungjitkusolmun S, Hamamoto K. Effect of phase difference in multi-antenna microwave thermal ablation for breast cancer treatment. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2015; 2013:3718-21. [PMID: 24110538 DOI: 10.1109/embc.2013.6610351] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Abstract
It was realized that cancer in breast is one of the most health hazards threatening women around the world for many years. Thermal ablation by using microwave energy is another alternative surgical maneuver due to its minimally invasive therapeutic technique. In this research, we investigate an effect of phase difference between three adjacent opened-slot coaxial probes in a multiple antenna alignment of microwave thermal ablation system for breast cancer treatment. FEM by using COMSOL is an implementation tools to simulate for 0, 45, 90, 135 and 180 degree of phase difference. 3D Simulation results show that temperature distribution pattern, destructive volume and SAR in breast tissue are affected from those phase-shift utilization in multi-antenna system significantly.
Collapse
|
4
|
Karampatzakis A, Kühn S, Tsanidis G, Neufeld E, Samaras T, Kuster N. Heating characteristics of antenna arrays used in microwave ablation: A theoretical parametric study. Comput Biol Med 2013; 43:1321-7. [DOI: 10.1016/j.compbiomed.2013.07.013] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/22/2013] [Revised: 06/18/2013] [Accepted: 07/13/2013] [Indexed: 12/22/2022]
|
5
|
Prakash P, Salgaonkar VA, Clif Burdette E, Diederich CJ. Multiple applicator hepatic ablation with interstitial ultrasound devices: theoretical and experimental investigation. Med Phys 2013; 39:7338-49. [PMID: 23231283 DOI: 10.1118/1.4765459] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022] Open
Abstract
PURPOSE To evaluate multiple applicator implant configurations of interstitial ultrasound devices for large volume ablation of liver tumors. METHODS A 3D bioacoustic-thermal model using the finite element method was implemented to assess multiple applicator implant configurations for thermal ablation with interstitial ultrasound energy. Interstitial applicators consist of linear arrays of up to four 10 mm-long tubular ultrasound transducers, each under separate and dynamic power control, enclosed within a water-cooled delivery catheter (2.4 mm OD). The authors considered parallel implants with two and three applicators (clustered configuration), spaced 2-3 cm apart, to simulate open surgical placement. In addition, the authors considered two applicator implants with applicators converging and diverging at angles of ∼20°, 30°, and 45° to simulate percutaneous placement. Heating experiments (10-15 min) were performed and compared against simulations employing the same experimental parameters. To estimate the performance of parallel, multiple applicator configurations in an in vivo setting, simulations were performed taking into account a range of blood perfusion levels (0, 5, 12, and 15 kg m(-3) s(-1)) that may occur in tumors of varying vascularity. The impact of tailoring the power supplied to individual transducer elements along the length of applicators is explored for applicators inserted in non-parallel (converging and diverging) configurations. Thermal dose (t(43) > 240 min) and temperature thresholds (T > 52 °C) were used to define the ablation zones, with dynamic changes to tissue acoustic and thermal properties incorporated within the model. RESULTS Experiments in ex vivo bovine liver yielded ablation zones ranging between 4.0-5.6 cm × 3.2-4.9 cm, in cross section. Ablation zone dimensions predicted by simulations with similar parameters to the experiments were in close agreement (within 5 mm). Simulations of in vivo heating showed that 15 min heating and interapplicator spacing less than 3 cm are required to obtain contiguous, complete ablation zones. The ability to create complete ablation zone profiles for nonparallel implants was illustrated by tailoring applied power levels along the length of applicators. CONCLUSIONS Parallel implants consisting of three interstitial ultrasound applicators in a triangular configuration yield complete ablation zones measuring up to 6.2 cm × 5.7 cm after 15 min heating. At larger interapplicator spacing, the level of blood perfusion in the tumor may yield indentations along the periphery of the ablation zone. Tailoring applied power along the length of the applicator can accommodate for nonparallel implants, without compromising safety.
Collapse
Affiliation(s)
- Punit Prakash
- Department of Radiation Oncology, University of California, San Francisco, CA, USA.
| | | | | | | |
Collapse
|
6
|
Dodde RE, Gee JS, Geiger JD, Shih AJ. Monopolar electrosurgical thermal management for minimizing tissue damage. IEEE Trans Biomed Eng 2011; 59:167-73. [PMID: 21947515 DOI: 10.1109/tbme.2011.2168956] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
In this study, a novel thermal management system (TMS) is developed for the minimization of thermal spread created by a monopolar electrosurgical device, the most commonly used surgical instrument. The phenomenon of resistive heating of tissue is modeled using the finite-element method (FEM) to analyze the electrical potential and temperature distributions in biological tissue subjected to heat generation during monopolar electrosurgery. Ex vivo experiments are used to validate the FEM by comparing the model predicted and experimentally measured temperatures. The predicted FEM maximum temperature 1.0 m adjacent to the electrode is within 1% of the experimentally measured maximum temperature using a standard monopolar pencil electrode. A TMS consisting of adjacent cooling channels produces coagulation volumes 80% that of standard monopolar procedures while maintaining comparable temperatures in the targeted tissue below the electrode. In vivo temperatures using a device incorporating a TMS at distances of 2 and 3 m adjacent to the electrode edge are maintained below temperatures known to damage tissue.
Collapse
Affiliation(s)
- Robert E Dodde
- Department of Biomedical Engineering, TheUniversity of Michigan, Ann Arbor, MI 48109, USA.
| | | | | | | |
Collapse
|
7
|
Ji Z, Brace CL. Expanded modeling of temperature-dependent dielectric properties for microwave thermal ablation. Phys Med Biol 2011; 56:5249-64. [PMID: 21791728 DOI: 10.1088/0031-9155/56/16/011] [Citation(s) in RCA: 85] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
Abstract
Microwaves are a promising source for thermal tumor ablation due to their ability to rapidly heat dispersive biological tissues, often to temperatures in excess of 100 °C. At these high temperatures, tissue dielectric properties change rapidly and, thus, so do the characteristics of energy delivery. Precise knowledge of how tissue dielectric properties change during microwave heating promises to facilitate more accurate simulation of device performance and helps optimize device geometry and energy delivery parameters. In this study, we measured the dielectric properties of liver tissue during high-temperature microwave heating. The resulting data were compiled into either a sigmoidal function of temperature or an integration of the time-temperature curve for both relative permittivity and effective conductivity. Coupled electromagnetic-thermal simulations of heating produced by a single monopole antenna using the new models were then compared to simulations with existing linear and static models, and experimental temperatures in liver tissue. The new sigmoidal temperature-dependent model more accurately predicted experimental temperatures when compared to temperature-time integrated or existing models. The mean percent differences between simulated and experimental temperatures over all times were 4.2% for sigmoidal, 10.1% for temperature-time integration, 27.0% for linear and 32.8% for static models at the antenna input power of 50 W. Correcting for tissue contraction improved agreement for powers up to 75 W. The sigmoidal model also predicted substantial changes in heating pattern due to dehydration. We can conclude from these studies that a sigmoidal model of tissue dielectric properties improves prediction of experimental results. More work is needed to refine and generalize this model.
Collapse
Affiliation(s)
- Zhen Ji
- Department of Radiology, University of Wisconsin-Madison, Madison, WI, USA
| | | |
Collapse
|
8
|
Ryan TP, Turner PF, Hamilton B. Interstitial microwave transition from hyperthermia to ablation: historical perspectives and current trends in thermal therapy. Int J Hyperthermia 2010; 26:415-33. [PMID: 20597625 DOI: 10.3109/02656731003639356] [Citation(s) in RCA: 50] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/16/2023] Open
Abstract
This work reviews the transition from hyperthermia to ablation for cancer treatment with interstitial microwave (MW) antennas. Early work utilising MW energy for thermal treatment of cancer tissue began in the late 1970s using single antennas applied interstitially or the use of multiple interstitial antennas driven with the same phase and equal power at 915 or 2450 MHz. The original antenna designs utilised monopole or dipole configurations. Early work in thermal therapy in the hyperthermia field eventually led to utilisation of these antennas and methods for MW ablation of tumours. Efforts to boost the radiated MW power levels while decreasing antenna shaft temperatures led to incorporation of internally cooled antennas for ablation. To address larger tumours, MW treatment utilised arrays that were simultaneously activated by either non-synchronous or synchronous phase operation, benefiting both hyperthermia and ablation strategies. Numerical modelling was used to provide treatment planning guidance for hyperthermia treatments and is expected to provide a similar benefit for ablation therapy. Although this is primarily a review paper, some new data are included. These new data show that three antennas with 2.5 cm spacing at 45 W/channel and 10 min resulted in a volume of 89.8 cm(3) when operated synchronously, but only 53.4 cm(3) non-synchronously. Efficiency was 1.1 (synchronous) versus 0.7 (non-synchronous). MW systems, treatment planning, and image guidance continue to evolve to provide better tools and options for clinicians and patients in order to provide better approach and targeting optimisation with the goal of improved treatment for the patient.
Collapse
|