Topology and random-walk network representation of cardiac dynamics for localization of myocardial infarction

Automated detection of myocardial infarction using binary Harry Hawks feature selection and ensemble KNN classifier

Myocardial infarction (MI), referred to as a heart attack, is a life-threatening condition that happens due to blood clots, typically, blood flow to a portion of the heart muscle is blocked. The cardiac muscle may become permanently damaged if there is insufficient oxygen and blood flow to the affected area. It's crucial to treat MI as soon as possible because even a small delay might have serious effects. The primary diagnostic tool to track and identify the signs of MI is the electrocardiogram (ECG). The complexity of MI signals combined with noise makes it difficult for clinicians to make a precise and prompt diagnosis. It might be laborious and time-consuming to manually analyse an enormous quantity of ECG data. Therefore, techniques for autonomously diagnosing from the ECG data are required. There have been numerous research on the topic of MI espial, but the majority of the algorithms are cognitively intensive when working with empirical data. The current study suggests a unique method for the efficient and reliable identification of MI. We employed circulant singular spectrum analysis (CSSA) for baseline wander removal, a 4-stage Savitzky-Golay (SG) filter to expunge powerline interference from the ECG signal and segmented in the preprocessing stage. Thus segmented ECG has been decomposed using CSSA, entropy based features are extracted. The best features are selected by using binary Harris hawk optimization (BHHO) and to machine learning (ML) classifiers like Naive Bayes, Decision tree, K-nearest neighbor (KNN), Support vector machine (SVM), and Ensemble subspace KNN. Our suggested method has been examined from both class as well as subject oriented perspectives. While the subject-oriented technique uses data from one patient for testing while using data from the other subjects for training, the class-wise strategy divides data as test data as well as training data regardless of subjects. We succeeded in achieving accuracy (A c % ) of 99.8, sensitivity (S e % ) of 99, and 100 specificity (Sp%) under the class-oriented approach. Similarly, for the subject wise strategy we achieved a mean A c % , Se%, and Sp% of 85.2, 83.1, and 84.5, respectively.

Representative QRS loop of the VCG record evaluation

Introduction: This study proposes an algorithm for preprocessing VCG records to obtain a representative QRS loop. Methods: The proposed algorithm uses the following methods: Digital filtering to remove noise from the signal, wavelet-based detection of ECG fiducial points and isoelectric PQ intervals, spatial alignment of QRS loops, QRS time synchronization using root mean square error minimization and ectopic QRS elimination. The representative QRS loop is calculated as the average of all QRS loops in the VCG record. The algorithm is evaluated on 161 VCG records from a database of 58 healthy control subjects, 69 patients with myocardial infarction, and 34 patients with bundle branch block. The morphologic intra-individual beat-to-beat variability rate is calculated for each VCG record. Results and Discussion: The maximum relative deviation is 12.2% for healthy control subjects, 19.3% for patients with myocardial infarction, and 17.2% for patients with bundle branch block. The performance of the algorithm is assessed by measuring the morphologic variability before and after QRS time synchronization and ectopic QRS elimination. The variability is reduced by a factor of 0.36 for healthy control subjects, 0.38 for patients with myocardial infarction, and 0.41 for patients with bundle branch block. The proposed algorithm can be used to generate a representative QRS loop for each VCG record. This representative QRS loop can be used to visualize, compare, and further process VCG records for automatic VCG record classification.

Enhanced SpO2 estimation using explainable machine learning and neck photoplethysmography

Reflectance-based photoplethysmogram (PPG) sensors provide flexible options of measuring sites for blood oxygen saturation (SpO2) measurement. But they are mostly limited by accuracy, especially when applied to different subjects, due to the diverse human characteristics (skin colors, hair density, etc.) and usage conditions of different sensor settings. This study addresses the estimation of SpO2 at non-standard measuring sites employing reflectance-based sensors. It proposes an automated construction of subject inclusion-exclusion criteria for SpO2 measuring devices, using a combination of unsupervised clustering, supervised regression, and model explanations. This is perhaps among the first adaptation of SHAP to explain the clusters gleaned from unsupervised learning methods. As a wellness application case study, we developed a pillow-based wearable device to collect reflectance PPGs from both the brachiocephalic and carotid arteries around the neck. The experiment was conducted on 33 subjects, each under totally 80 different sensor settings. The proposed approach addressed the variations of humans and devices, as well as the heterogeneous mapping between signals and SpO2 values. It identified effective device settings and characteristics of their applicable subject groups (i.e., subject inclusion-exclusion criteria). Overall, it reduced the root mean squared error (RMSE) by 16%, compared to an empirical formula and a plain SpO2 estimation model.

A dynamic learning-based ECG feature extraction method for myocardial infarction detection

Objective.Myocardial infarction (MI) is one of the leading causes of human mortality in all cardiovascular diseases globally. Currently, the 12-lead electrocardiogram (ECG) is widely used as a first-line diagnostic tool for MI. However, visual inspection of pathological ECG variations induced by MI remains a great challenge for cardiologists, since pathological changes are usually complex and slight.Approach.To have an accuracy of the MI detection, the prominent features extracted from in-depth mining of ECG signals need to be explored. In this study, a dynamic learning algorithm is applied to discover prominent features for identifying MI patients via mining the hidden inherent dynamics in ECG signals. Firstly, the distinctive dynamic features extracted from the multi-scale decomposition of dynamic modeling of the ECG signals effectively and comprehensibly represent the pathological ECG changes. Secondly, a few most important dynamic features are filtered through a hybrid feature selection algorithm based on filter and wrapper to form a representative reduced feature set. Finally, different classifiers based on the reduced feature set are trained and tested on the public PTB dataset and an independent clinical data set.Main results.Our proposed method achieves a significant improvement in detecting MI patients under the inter-patient paradigm, with an accuracy of 94.75%, sensitivity of 94.18%, and specificity of 96.33% on the PTB dataset. Furthermore, classifiers trained on PTB are verified on the test data set collected from 200 patients, yielding a maximum accuracy of 84.96%, sensitivity of 85.04%, and specificity of 84.80%.Significance.The experimental results demonstrate that our method performs distinctive dynamic feature extraction and may be used as an effective auxiliary tool to diagnose MI patients.

Detection and Localization of Myocardial Infarction Based on Multi-Scale ResNet and Attention Mechanism

PURPOSE

Myocardial infarction (MI) is one of the most common cardiovascular diseases, frequently resulting in death. Early and accurate diagnosis is therefore important, and the electrocardiogram (ECG) is a simple and effective method for achieving this. However, it requires assessment by a specialist; so many recent works have focused on the automatic assessment of ECG signals.

METHODS

For the detection and localization of MI, deep learning models have been proposed, but the diagnostic accuracy of this approaches still need to be improved. Moreover, with deep learning methods the way in which a given result was achieved lacks interpretability. In this study, ECG data was obtained from the PhysioBank open access database, and was analyzed as follows. Firstly, the 12-lead ECG signal was preprocessed to identify each beat and obtain each heart interval. Secondly, a multi-scale deep learning model combined with a residual network and attention mechanism was proposed, where the input was the 12-lead ECG recording. Through the SENet model and the Grad-CAM algorithm, the weighting of each lead was calculated and visualized. Using existing knowledge of the way in which different types of MI gave characteristic patterns in specific ECG leads, the model was used to provisionally diagnose the type of MI according to the characteristics of each of the 12 ECG leads.

RESULTS

Ten types of MI anterior, anterior lateral, anterior septal, inferior, inferior lateral, inferior posterior, inferior posterior lateral, lateral, posterior, and posterior lateral were diagnosed. The average accuracy, sensitivity, and specificity for MI detection of all lesion types was 99.98, 99.94, and 99.98%, respectively; and the average accuracy, sensitivity, and specificity for MI localization was 99.79, 99.88, and 99.98%, respectively.

CONCLUSION

When compared to existing models based on traditional machine learning methods, convolutional neural networks and recurrent neural networks, the results showed that the proposed model had better diagnostic performance, being superior in accuracy, sensitivity, and specificity.

Short duration Vectorcardiogram based inferior myocardial infarction detection: class and subject-oriented approach

Myocardial infarction (MI) happens when blood stops circulating to an explicit segment of the heart causing harm to the heart muscles. Vectorcardiography (VCG) is a technique of recording direction and magnitude of the signals that are produced by the heart in a 3-lead representation. In this work, we present a technique for detection of MI in the inferior portion of heart using short duration VCG signals. The raw signal was pre-processed using the median and Savitzky-Golay (SG) filter. The Stationary Wavelet Transform (SWT) was used for time-invariant decomposition of the signal followed by feature extraction. The selected features using minimum-redundancy-maximum-relevance (mRMR) based feature selection method were applied to the supervised classification methods. The efficacy of the proposed method was assessed under both class-oriented and a more real-life subject-oriented approach. An accuracy of 99.14 and 89.37% were achieved respectively. Results of the proposed technique are better than existing state-of-art methods and used VCG segment is shorter. Thus, a shorter segment and a high accuracy can be helpful in the automation of timely and reliable detection of MI. The satisfactory performance achieved in the subject-oriented approach shows reliability and applicability of the proposed technique.

Localization of myocardial infarction with multi-lead ECG based on DenseNet

BACKGROUND AND OBJECTIVE

Myocardial infarction (MI) is a critical acute ischemic heart disease, which can be early diagnosed by electrocardiogram (ECG). However, the most research of MI localization pay more attention on the specific changes in every ECG lead independent. In our study, the research envisages the development of a novel multi-lead MI localization approach based on the densely connected convolutional network (DenseNet).

METHODS

Considering the correlation of the multi-lead ECG, the method using parallel 12-lead ECG, systematically exploited the correlation of the inter-lead signals. In addition, the dense connection of DenseNet enhanced the reuse of the feature information between the inter-lead and intra-lead signals. The proposed method automatically captured the effective pathological features, which improved the identification of MI.

RESULTS

The experimental results based on PTB diagnostic ECG database showed that the accuracy, sensitivity and specificity of the proposed method was 99.87%, 99.84% and 99.98% for 11 types of MI localization.

CONCLUSIONS

The proposed method has achieved superior results compared to other localization methods, which can be introduced into the clinical practice to assist the diagnosis of MI.

Cross-recurrence analysis for pattern matching of multidimensional physiological signals

Cross-recurrence quantification analysis (CRQA), based on the cross-recurrence plot (CRP), is an effective method to characterize and quantify the nonlinear interrelationships between a pair of nonlinear time series. It allows the flexibility of reconstructing signals in the phase space and to identify different types of patterns at arbitrary positions between trajectories. These advantages make CRQA attractive for time series data mining tasks, which have been of recent interest in the literature. However, little has been done to exploit CRQA for pattern matching of multidimensional, especially spatiotemporal, physiological signals. In this paper, we present a novel methodology in which CRQA statistics serve as measures of dissimilarity between pairs of signals and are subsequently used to uncover clusters within the data. This methodology is evaluated on a real dataset consisting of 3D spatiotemporal vectorcardiogram (VCG) signals from healthy and diseased patients. Experimental results show that L_max, the length of the longest diagonal line in the CRP, yields the best-performing clustering that almost exactly matches the ground truth diagnoses of patients. Results also show that our proposed measure, R_τ ^max, which characterizes the maximum similarity between signals over all pairwise time-delayed alignments, outperforms all other tested CRQA measures (in terms of matching the ground truth) when the VCG signals are rescaled to reduce the effects of signal amplitude.

A Dynamic Systems Approach for Detecting and Localizing of Infarct-Related Artery in Acute Myocardial Infarction Using Compressed Paper-Based Electrocardiogram (ECG)

Timely evaluation and reperfusion have improved the myocardial salvage and the subsequent recovery rate of the patients hospitalized with acute myocardial infarction (MI). Long waiting time and time-consuming procedures of in-hospital diagnostic testing severely affect the timeliness. We present a Poincare pattern ensemble-based method with the consideration of multi-correlated non-stationary stochastic system dynamics to localize the infarct-related artery (IRA) in acute MI by fully harnessing information from paper-based Electrocardiogram (ECG). The vectorcardiogram (VCG) diagnostic features extracted from only 2.5-s long paper ECG recordings were used to hierarchically localize the IRA-not mere localization of the infarcted cardiac tissues-in acute MI. Paper ECG records and angiograms of 106 acute MI patients collected at the Heart Artery and Vein Center at Fresno California and the 12-lead ECG signals from the Physionet PTB online database were employed to validate the proposed approach. We reported the overall accuracies of 97.41% for healthy control (HC) vs. MI, 89.41 ± 9.89 for left and right culprit arteries vs. others, 88.2 ± 11.6 for left main arteries vs. right-coronary-ascending (RCA) and 93.67 ± 4.89 for left-anterior-descending (LAD) vs. left-circumflex (LCX). The IRA localization from paper ECG can be used to timely triage the patients with acute coronary syndromes to the percutaneous coronary intervention facilities.

A Review of Automated Methods for Detection of Myocardial Ischemia and Infarction Using Electrocardiogram and Electronic Health Records

There is a growing body of research focusing on automatic detection of ischemia and myocardial infarction (MI) using computer algorithms. In clinical settings, ischemia and MI are diagnosed using electrocardiogram (ECG) recordings as well as medical context including patient symptoms, medical history, and risk factors-information that is often stored in the electronic health records. The ECG signal is inspected to identify changes in the morphology such as ST-segment deviation and T-wave changes. Some of the proposed methods compute similar features automatically while others use nonconventional features such as wavelet coefficients. This review provides an overview of the methods that have been proposed in this area, focusing on their historical evolution, the publicly available datasets that they have used to evaluate their performance, and the details of their algorithms for ECG and EHR analysis. The validation strategies that have been used to evaluate the performance of the proposed methods are also presented. Finally, the paper provides recommendations for future research to address the shortcomings of the currently existing methods and practical considerations to make the proposed technical solutions applicable in clinical practice.

Self-organizing visualization and pattern matching of vectorcardiographic QRS waveforms

QRS morphology is commonly used in the electrocardiographic diagnosis of ventricular depolarization such as left bundle branch block (LBBB) and ventricular septal infarction. We investigated whether pattern matching of QRS loops in the 3-dimensional vectorcardiogram (VCG) will improve the grouping of patients whose space-time electrical activity akin to each other, thereby assisting in clinical decision making. First, pattern dissimilarity of VCG QRS loops is qualitatively measured and characterized among patients, resulting in a 93×93 distance matrix of patient-to-patient dissimilarity. Each patient is then represented as a node in the network (or a star in the galaxy), but node locations are optimized to preserve the dissimilarity matrix. The optimization is achieved with a self-organizing algorithm that iteratively minimizes the network energy. Experimental results showed that patients' locations converge as the representation error reaches a stable phase. The convergence is independent of initial locations of network nodes. Most importantly, 93 patients are automatically organized into 3 clusters of healthy control, LBBB, and infarction. Spatial coordinates of nodes (or patients) are evidently novel predictors that can be used in the computer-assisted detection of cardiac disorders. Self-organizing pattern matching is shown to have strong potentials for large-scale unsupervised learning of patient groups.

Wireless Wearable Multisensory Suite and Real-Time Prediction of Obstructive Sleep Apnea Episodes

Obstructive sleep apnea (OSA) is a common sleep disorder found in 24% of adult men and 9% of adult women. Although continuous positive airway pressure (CPAP) has emerged as a standard therapy for OSA, a majority of patients are not tolerant to this treatment, largely because of the uncomfortable nasal air delivery during their sleep. Recent advances in wireless communication and advanced ("bigdata") preditive analytics technologies offer radically new point-of-care treatment approaches for OSA episodes with unprecedented comfort and afforadability. We introduce a Dirichlet process-based mixture Gaussian process (DPMG) model to predict the onset of sleep apnea episodes based on analyzing complex cardiorespiratory signals gathered from a custom-designed wireless wearable multisensory suite. Extensive testing with signals from the multisensory suite as well as PhysioNet's OSA database suggests that the accuracy of offline OSA classification is 88%, and accuracy for predicting an OSA episode 1-min ahead is 83% and 3-min ahead is 77%. Such accurate prediction of an impending OSA episode can be used to adaptively adjust CPAP airflow (toward improving the patient's adherence) or the torso posture (e.g., minor chin adjustments to maintain steady levels of the airflow).