Dual-Energy X-Ray Absorptiometry for Measurement of Phalangeal Bone Mineral Density on a Slot-Scanning Digital Radiography System

Exploring the Impact of Noise and Image Quality on Deep Learning Performance in DXA Images

BACKGROUND AND OBJECTIVE

Segmentation of the femur in Dual-Energy X-ray (DXA) images poses challenges due to reduced contrast, noise, bone shape variations, and inconsistent X-ray beam penetration. In this study, we investigate the relationship between noise and certain deep learning (DL) techniques for semantic segmentation of the femur to enhance segmentation and bone mineral density (BMD) accuracy by incorporating noise reduction methods into DL models.

METHODS

Convolutional neural network (CNN)-based models were employed to segment femurs in DXA images and evaluate the effects of noise reduction filters on segmentation accuracy and their effect on BMD calculation. Various noise reduction techniques were integrated into DL-based models to enhance image quality before training. We assessed the performance of the fully convolutional neural network (FCNN) in comparison to noise reduction algorithms and manual segmentation methods.

RESULTS

Our study demonstrated that the FCNN outperformed noise reduction algorithms in enhancing segmentation accuracy and enabling precise calculation of BMD. The FCNN-based segmentation approach achieved a segmentation accuracy of 98.84% and a correlation coefficient of 0.9928 for BMD measurements, indicating its effectiveness in the clinical diagnosis of osteoporosis.

CONCLUSIONS

In conclusion, integrating noise reduction techniques into DL-based models significantly improves femur segmentation accuracy in DXA images. The FCNN model, in particular, shows promising results in enhancing BMD calculation and clinical diagnosis of osteoporosis. These findings highlight the potential of DL techniques in addressing segmentation challenges and improving diagnostic accuracy in medical imaging.

Meta-Learning Analysis of Ultrasonic Guided Waves for Coated Cortical Bone Characterization

Due to its sensitivity to geometrical and mechanical properties of waveguides, ultrasonic guided waves (UGWs) propagating in cortical bones play an important role in the early diagnosis of osteoporosis. However, as impacts of overlaid soft tissues are complex, it remains challenging to retrieve bone properties accurately. Meta-learning, i.e., learning to learn, is capable of extracting transferable features from a few data and, thus, suitable to capture potential characteristics, leading to accurate bone assessment. In this study, we investigate the feasibility to apply the multichannel identification neural network (MCINN) to estimate the thickness and bulk velocities of coated cortical bone. It minimizes the effects of soft tissue by extracting specific features of UGW, which shares the same cortical properties, while the overlaid soft tissue varies. Distinguished from most reported methods, this work moves from the hand-design inversion scheme to data-driven assessment by automatically mapping features of UGW to the space of bone properties. The MCINN was trained and validated using simulated datasets produced by the finite-difference time-domain (FDTD) method and then applied to experimental data obtained from cortical bovine bone plates overlaid with soft tissue mimics. A good match was found between experimental trajectories and theoretical dispersion curves. The results demonstrated that the proposed method was feasible to assess the thickness of coated cortical bone plates.

Bone Mineral Density Screening System Using CMOS-Sensor X-ray Detector

This research concerns a design and construction of a bone mineral density (BMD) and bone mineral content (BMC) measurement system based on dual energy X-ray absorptiometry (DEXA). An indirect X-ray detector is designed by optical coupling CMOS sensor with image on the intensifying screen. A dedicated microcontroller X-ray apparatus is used as an X-ray source to capture two energy level X-ray of middle phalanges bone of middle finger. The captured image is processed based on modified Beer-Lambert law to compute bone mineral density. Bone mineral content is also computed by determining the area of the phalanges bone using active contour. The designed bone mineral density (BMD) and bone mineral content (BMC) measurement system is low-cost and hence can be distributed at district hospital for screening purposes of Osteoporosis of the elderly. Compared with BMD measured from commercial model, BMD measurement of our system acquires linear relation with R2 equals 0.969. The mean square error between the normalized BMD value and that of the commercial model is 0.0000981.

Computer-aided osteoporosis detection from DXA imaging

BACKGROUND AND OBJECTIVE

Osteoporosis is a skeletal disease caused by a high rate of bone tissue loss, and it is a major cause of bone fracture. In contemporary society, osteoporosis is more common than cancer and stroke and results in a higher rate of morbidity and mortality in the human population. Osteoporosis can conclusively be diagnosed with dual energy X-ray absorptiometry (DXA). In this study, we propose a computer-aided osteoporosis detection (CAOD) technique that automatically measures bone mineral density (BMD) and generates an osteoporosis report from a DXA scan.

METHODS

The CAOD model denoise and segments DXA images using a non-local mean filter, Machine learning pixel label random forest respectively, and locates regions of interest with higher accuracy. Pixel label random forest classifies a pixel either bone or soft tissue; then contours are extracted from binary image to locate regions of interest and calculate BMD from bone and soft tissues pixels. Mean standard deviation and correlation coefficients statistical analysis were used to evaluate the consistency and accuracy of BMD measurements.

RESULTS

During a consistency test of BMD measurements using three consecutive scans from Computerized Imaging Reference Systems' Bona Fide Phantom (CIRS-BFP) for the spine, the CAOD model showed an averaged standard deviation of 0.0029 while the standard deviation from manual measurements on the same data set by three different individuals was recorded as 0.1199. During another correlation study of BMD measurements evaluating real human scan images by the CAOD model versus manual measurement, the model scored a correlation coefficient of R² = 0.9901 while the CIRS-BFP study scored a correlation coefficient of R² = 0.9709.

CONCLUSIONS

The CAOD model increases the preciseness and accuracy of BMD measurements. This CAOD method will help clinicians, untrained DXA operators, and researchers (medical scientists, doctors, and bone researchers) use the DXA system with reliable accuracy and overcome workload challenges. It will also improve osteoporosis diagnosis from DXA systems and increase system performance and value.

Denoising images of dual energy X-ray absorptiometry using non-local means filters

BACKGROUND

In general, the image quality of high and low energy images of dual energy X-ray absorptiometry (DXA) suffers from noise due to the use of a small amount of X-rays. Denoising of DXA images could be a key process to improve a bone mineral density map, which is derived from a pair of high and low energy images. This could further improve the accuracy of diagnosis of bone fractures and osteoporosis.

OBJECTIVE

This study aims to develop and test a new technology to improve the quality, remove the noise, and preserve the edges and fine details of real DXA images.

METHODS

In this study, a denoising technique for high and low energy DXA images using a non-local mean filter (NLM) was presented. The source and detector noises of a DXA system were modeled for both high and low DXA images. Then, the optimized parameters of the NLM filter were derived utilizing the experimental data from CIRS-BFP phantoms. After that, the optimized NLM was tested and verified using the DXA images of the phantoms and real human spine and femur.

RESULTS

Quantitative evaluation of the results showed average 24.22% and 34.43% improvement of the signal-to-noise ratio for real high and low spine images, respectively, while the improvements were about 15.26% and 13.55% for the high and low images of the femur. The qualitative visual observations of both phantom and real structures also showed significantly improved quality and reduced noise while preserving the edges in both high and low energy images. Our results demonstrate that the proposed NLM outperforms the conventional method using an anisotropic diffusion filter (ADF) and median techniques for all phantom and real human DXA images.

CONCLUSIONS

Our work suggests that denoising via NLM could be a key preprocessing method for clinical DXA imaging.

Femur segmentation in DXA imaging using a machine learning decision tree

BACKGROUND

Accurate measurement of bone mineral density (BMD) in dual-energy X-ray absorptiometry (DXA) is essential for proper diagnosis of osteoporosis. Calculation of BMD requires precise bone segmentation and subtraction of soft tissue absorption. Femur segmentation remains a challenge as many existing methods fail to correctly distinguish femur from soft tissue. Reasons for this failure include low contrast and noise in DXA images, bone shape variability, and inconsistent X-ray beam penetration and attenuation, which cause shadowing effects and person-to-person variation.

OBJECTIVE

To present a new method namely, a Pixel Label Decision Tree (PLDT), and test whether it can achieve higher accurate performance in femur segmentation in DXA imaging.

METHODS

PLDT involves mainly feature extraction and selection. Unlike photographic images, X-ray images include features on the surface and inside an object. In order to reveal hidden patterns in DXA images, PLDT generates seven new feature maps from existing high energy (HE) and low energy (LE) X-ray features and determines the best feature set for the model. The performance of PLDT in femur segmentation is compared with that of three widely used medical image segmentation algorithms, the Global Threshold (GT), Region Growing Threshold (RGT), and artificial neural networks (ANN).

RESULTS

PLDT achieved a higher accuracy of femur segmentation in DXA imaging (91.4%) than either GT (68.4%), RGT (76%) or ANN (84.4%).

CONCLUSIONS

The study demonstrated that PLDT outperformed other conventional segmentation techniques in segmenting DXA images. Improved segmentation should help accurate computation of BMD which later improves clinical diagnosis of osteoporosis.

Non-local means filter denoising for DEXA images

Dual high and low energy images of Dual Energy X-ray Absorptiometry (DEXA) suffer from noises due to the use of weak amount of X-rays. Denoising these DEXA images could be a key process to enhance and improve a Bone Mineral Density (BMD) map which is derived from a pair of high and low energy images. This could further improve the accuracy of diagnosis of bone fractures, osteoporosis, and etc. In this paper, we present a denoising technique for dual high and low energy images of DEXA via non-local means filter (NLMF). The noise of dual DEXA images is modeled based on both source and detector noises of a DEXA system. Then, the parameters of the proposed NLMF are optimized for denoising utilizing the experimental data from uniform phantoms. The optimized NLMF is tested and verified with the DEXA images of the uniform phantoms and real human spine. The quantitative evaluation shows the improvement of Signal-to-Noise Ratio (SNR) for the high and low phantom images on the order of 30.36% and 27.02% and for the high and low real spine images on the order of 22.28% and 33.43%, respectively. Our work suggests that denoising via NLMF could be a key preprocessing process for clinical DEXA imaging.