An Ambulatory Gait Monitoring System with Activity Classification and Gait Parameter Calculation Based on a Single Foot Inertial Sensor

Foot orientation and trajectory variability in locomotion: Effects of real-world terrain

Capturing human locomotion in nearly any environment or context is becoming increasingly feasible with wearable sensors, giving access to commonly encountered walking conditions. While important in expanding our understanding of locomotor biomechanics, these more variable environments present challenges to identify changes in data due to person-level factors among the varying environment-level factors. Our study examined foot-specific biomechanics while walking on terrain commonly encountered with the goal of understanding the extent to which these variables change due to terrain. We recruited healthy adults to walk at self-selected speeds on stairs, flat ground, and both shallow and steep sloped terrain. A pair of inertial measurement units were embedded in both shoes to capture foot biomechanics while walking. Foot orientation was calculated using a strapdown procedure and foot trajectory was determined by double integrating the linear acceleration. Stance time, swing time, cadence, sagittal and frontal orientations, stride length and width were extracted as discrete variables. These data were compared within-participant and across terrain conditions. The physical constraints of the stairs resulted in shorter stride lengths, less time spent in swing, toe-first foot contact, and higher variability during stair ascent specifically (p<0.05). Stride lengths increased when ascending compared to descending slopes, and the sagittal foot angle at initial contact was greatest in the steep slope descent condition (p<0.05). No differences were found between conditions for horizontal foot angle in midstance (p≥0.067). Our results show that walking on slopes creates differential changes in foot biomechanics depending on whether one is descending or ascending, and stairs require different biomechanics and gait timing than slopes or flat ground. This may be an important factor to consider when making comparisons of real-world walking bouts, as greater proportions of one terrain feature in a data set could create bias in the outcomes. Classifying terrain in unsupervised walking datasets would be helpful to avoid comparing metrics from different walking terrain scenarios.

The Fundamentals and Applications of Wearable Sensor Devices in Sports Medicine: A Scoping Review

PURPOSE

To (1) characterize the various forms of wearable sensor devices (WSDs) and (2) review the peer-reviewed literature of applied wearable technology within sports medicine.

METHODS

A systematic search of PubMed and EMBASE databases, from inception through 2023, was conducted to identify eligible studies using WSDs within sports medicine. Data extraction was performed of study demographics and sensor specifications. Included studies were categorized by application: athletic training, rehabilitation, and research.

RESULTS

In total, 43 studies met criteria for inclusion in this review. Forms of WSDs include pedometers, accelerometers, encoders (consisting of magnetometers and gyroscopes), force sensors, global positioning system trackers, and inertial measurement units. Outcome metrics include step counts; gait, limb motion, and angular positioning; foot and skin pressure; change of direction and inclination, including analysis of both body parts and athletes on a field; displacement and velocity of body segments and joints; heart rate; plethysmography; sport-specific kinematics; range of motion, symmetry, and alignment; head impact; sleep; throwing biomechanics; and kinetic and spatiotemporal running metrics. WSDs are used in athletic training to assess sport-specific biomechanics and workload with a goal of injury prevention and training optimization, as well as for rehabilitation monitoring and research such as for risk predicting and aiding diagnosis.

CONCLUSIONS

WSDs enable real-time monitoring of human performance across a variety of implementations and settings, allowing collection of metrics otherwise not achievable. WSDs are powerful tools with multiple applications within athletic training, patient rehabilitation, and orthopaedic and sports medicine research.

CLINICAL RELEVANCE

Wearable technology may represent the missing link to quantitatively addressing return to play and previous performance. WSDs are commercially available and portable adjuncts that allow clinicians, trainers, and individual athletes to monitor biomechanical parameters, workload, and recovery status to better contextualize personalized training, injury risk, and rehabilitation.

Inertial measurement unit sensor-based gait analysis in adults and older adults: A cross-sectional study

BACKGROUND

Gait assessment has been used in a wide range of clinical applications, and gait velocity is also a leading predictor of disease and physical functional aspects in older adults.

RESEARCH QUESTION

The study aim to examine the changes in IMU-based gait parameters according to age in healthy adults aged 50 and older, to analyze differences between aging patients.

METHODS

A total of 296 healthy adults (65.32 ± 6.74 yrs; 83.10 % female) were recruited. Gait assessment was performed using an IMU sensor-based gait analysis system, and 3D motion information of hip and knee joints was obtained using magnetic sensors. The basic characteristics of the study sample were stratified by age category, and the baseline characteristics between the groups were compared using analysis of variance (ANOVA). Pearson's correlation analysis was used to analyze the relationship between age as the dependent variable and several measures of gait parameters and joint angles as independent variables.

RESULTS

The results of this study found that there were significant differences in gait velocity and both terminal double support in the three groups according to age, and statistically significant differences in the three groups in hip joint angle and knee joints angle. In addition, it was found that the gait velocity and knee/hip joint angle changed with age, and the gait velocity and knee/hip joint angle were also different in the elderly and adult groups.

CONCLUSIONS

We found changes in gait parameters and joint angles according to age in healthy adults and older adults and confirmed the difference in gait velocity and joint angles between adults and older adults.

Robust and adaptive terrain classification and gait event detection system

Real-time gait event detection (GED) system can be utilized for gait analysis and tracking fitness activities. GED for various types of terrains (e.g., stair-walk, uneven surfaces, etc.) is still an open research problem. This study presents an inertial sensor-based approach for real-time GED system that works for diverse terrains in an uncontrolled environment. The GED system classifies three types of terrains, i.e., flat-walk, stair-ascend and stair-descend, with an average classification accuracy of 99%. It also accurately detects various gait events, including, toe-strike, heel-rise, toe-off, and heel-strike. It is computationally efficient, implemented on a low-cost microcontroller, works in real-time and can be used in portable rehabilitation devices for use in dynamic environments.

Development and Testing of a Daily Activity Recognition System for Post-Stroke Rehabilitation

Those who survive the initial incidence of a stroke experience impacts on daily function. As a part of the rehabilitation process, it is essential for clinicians to monitor patients' health status and recovery progress accurately and consistently; however, little is known about how patients function in their own homes. Therefore, the goal of this study was to develop, train, and test an algorithm within an ambient, in-home depth sensor system that can classify and quantify home activities of individuals post-stroke. We developed the Daily Activity Recognition and Assessment System (DARAS). A daily action logger was implemented with a Foresite Healthcare depth sensor. Daily activity data were collected from seventeen post-stroke participants' homes over three months. Given the extensive amount of data, only a portion of the participants' data was used for this specific analysis. An ensemble network for activity recognition and temporal localization was developed to detect and segment the clinically relevant actions from the recorded data. The ensemble network, which learns rich spatial-temporal features from both depth and skeletal joint data, fuses the prediction outputs from a customized 3D convolutional-de-convolutional network, customized region convolutional 3D network, and a proposed region hierarchical co-occurrence network. The per-frame precision and per-action precision were 0.819 and 0.838, respectively, on the test set. The outcomes from the DARAS can help clinicians to provide more personalized rehabilitation plans that benefit patients.

Gait metrics analysis utilizing single-point inertial measurement units: a systematic review

BACKGROUND

Wearable sensors, particularly accelerometers alone or combined with gyroscopes and magnetometers in an inertial measurement unit (IMU), are a logical alternative for gait analysis. While issues with intrusive and complex sensor placement limit practicality of multi-point IMU systems, single-point IMUs could potentially maximize patient compliance and allow inconspicuous monitoring in daily-living. Therefore, this review aimed to examine the validity of single-point IMUs for gait metrics analysis and identify studies employing them for clinical applications.

METHODS

The Preferred Reporting Items for Systematic Reviews and Meta-Analyses Guidelines (PRISMA) were followed utilizing the following databases: PubMed; MEDLINE; EMBASE and Cochrane. Four databases were systematically searched to obtain relevant journal articles focusing on the measurement of gait metrics using single-point IMU sensors.

RESULTS

A total of 90 articles were selected for inclusion. Critical analysis of studies was conducted, and data collected included: sensor type(s); sensor placement; study aim(s); study conclusion(s); gait metrics and methods; and clinical application. Validation research primarily focuses on lower trunk sensors in healthy cohorts. Clinical applications focus on diagnosis and severity assessment, rehabilitation and intervention efficacy and delineating pathological subjects from healthy controls.

DISCUSSION

This review has demonstrated the validity of single-point IMUs for gait metrics analysis and their ability to assist in clinical scenarios. Further validation for continuous monitoring in daily living scenarios and performance in pathological cohorts is required before commercial and clinical uptake can be expected.

Gait-based Human Identification through Minimum Gait-phases and Sensors

The incredible pace at which the world's elderly population is growing will put severe burdens on current healthcare systems and resources. To alleviate this concern the health care systems must rely on the transformation of eldercare and old homes to use Ambient Assisted Living (AAL). Human identification is one of the most common and critical tasks for condition monitoring, human-machine interaction, and providing assistive services in such environments. Recently, human gait has gained new attention as a biometric for identification to achieve contactless identification from a distance robust to physical appearances. However, an important aspect of gait identification through wearables and image-based systems alike is accurate identification when limited information is available for example, when only a fraction of the whole gait cycle or only a part of the subject's body is visible. In this paper, we present a gait identification technique based on temporal and descriptive statistic parameters of different gait phases as the features and we investigate the performance of using only single gait phases for the identification task using a minimum number of sensors. Gait data were collected from 60 individuals through pelvis and foot sensors. Six different machine learning algorithms were used for identification. It was shown that it is possible to achieve high accuracy of over 95.5% by monitoring a single phase of the whole gait cycle through only a single sensor. It was also shown that the proposed methodology could be used to achieve 100% identification accuracy when the whole gait cycle was monitored through pelvis and foot sensors combined. The ANN was found to be more robust to less number of data features compared to SVM and was concluded as the best machine algorithm for the purpose.

An Inertial Sensor-Based Gait Analysis Pipeline for the Assessment of Real-World Stair Ambulation Parameters

Climbing stairs is a fundamental part of daily life, adding additional demands on the postural control system compared to level walking. Although real-world gait analysis studies likely contain stair ambulation sequences, algorithms dedicated to the analysis of such activities are still missing. Therefore, we propose a new gait analysis pipeline for foot-worn inertial sensors, which can segment, parametrize, and classify strides from continuous gait sequences that include level walking, stair ascending, and stair descending. For segmentation, an existing approach based on the hidden Markov model and a feature-based gait event detection were extended, reaching an average segmentation F1 score of 98.5% and gait event timing errors below ±10ms for all conditions. Stride types were classified with an accuracy of 98.2% using spatial features derived from a Kalman filter-based trajectory reconstruction. The evaluation was performed on a dataset of 20 healthy participants walking on three different staircases at different speeds. The entire pipeline was additionally validated end-to-end on an independent dataset of 13 Parkinson’s disease patients. The presented work aims to extend real-world gait analysis by including stair ambulation parameters in order to gain new insights into mobility impairments that can be linked to clinically relevant conditions such as a patient’s fall risk and disease state or progression.

A Wearable Sensor System to Measure Step-Based Gait Parameters for Parkinson's Disease Rehabilitation

Spatiotemporal parameters of gait serve as an important biomarker to monitor gait impairments as well as to develop rehabilitation systems. In this work, we developed a computationally-efficient algorithm (SDI-Step) that uses segmented double integration to calculate step length and step time from wearable inertial measurement units (IMUs) and assessed its ability to reliably and accurately measure spatiotemporal gait parameters. Two data sets that included simultaneous measurements from wearable sensors and from a laboratory-based system were used in the assessment. The first data set utilized IMU sensors and a GAITRite mat in our laboratory to monitor gait in fifteen participants: 9 young adults (YA₁) (5 females, 4 males, age 23.6 ± 1 years), and 6 people with Parkinson's disease (PD) (3 females, 3 males, age 72.3 ± 6.6 years). The second data set, which was accessed from a publicly-available repository, utilized IMU sensors and an optoelectronic system to monitor gait in five young adults (YA₂) (2 females, 3 males, age 30.5 ± 3.5 years). In order to provide a complete representation of validity, we used multiple statistical analyses with overlapping metrics. Gait parameters such as step time and step length were calculated and the agreement between the two measurement systems for each gait parameter was assessed using Passing-Bablok (PB) regression analysis and calculation of the Intra-class Correlation Coefficient (ICC (2,1)) with 95% confidence intervals for a single measure, absolute-agreement, 2-way mixed-effects model. In addition, Bland-Altman (BA) plots were used to visually inspect the measurement agreement. The values of the PB regression slope were close to 1 and intercept close to 0 for both step time and step length measures. The results obtained using ICC (2,1) for step length showed a moderate to excellent agreement for YA (between 0.81 and 0.95) and excellent agreement for PD (between 0.93 and 0.98), while both YA and PD had an excellent agreement in step time ICCs (>0.9). Finally, examining the BA plots showed that the measurement difference was within the limits of agreement (LoA) with a 95% probability. Results from this preliminary study indicate that using the SDI-Step algorithm to process signals from wearable IMUs provides measurements that are in close agreement with widely-used laboratory-based systems and can be considered as a valid tool for measuring spatiotemporal gait parameters.

Analyzing Gait in the Real World Using Wearable Movement Sensors and Frequently Repeated Movement Paths

Assessing interventions for mobility disorders using real-life movement remains an unsolved problem. We propose a new method combining the strengths of traditional laboratory studies where environment is strictly controlled, and field-based studies where subjects behave naturally. We use a foot-mounted inertial sensor, a GPS receiver and a barometric altitude sensor to reconstruct a subject's path and detailed foot movement, both indoors and outdoors, during days-long measurement using strapdown navigation and sensor fusion algorithms. We cluster repeated movement paths based on location, and propose that on these paths, most environmental and behavioral factors (e.g., terrain and motivation) are as repeatable as in a laboratory. During each bout of movement along a frequently repeated path, any synchronized measurement can be isolated for study, enabling focused statistical comparison of different interventions. We conducted a 10-day test on one subject wearing athletic shoes and sandals each for five days. The algorithm detected four frequently-repeated straight walking paths with at least 300 total steps and repetitions on at least three days for each condition. Results on these frequently-repeated paths indicated significantly lower foot clearance and shorter stride length and a trend toward decreased stride width when wearing athletic shoes vs. sandals. Comparisons based on all straight walking were similar, showing greater statistical power, but higher variability in the data. The proposed method offers a new way to evaluate how mobility interventions affect everyday movement behavior.

Smoother-Based 3-D Foot Trajectory Estimation Using Inertial Sensors

OBJECTIVE

Measuring three-dimensional (3-D) foot trajectories with foot-worn inertial measurement units (IMUs) is essential for a variety of applications, such as gait analysis and fall risk assessment. IMU-based foot trajectory is usually reconstructed by double integrating the global coordinate acceleration, in which drifts of signals are accumulated and lead to unbounded error increase. To reduce drift errors, a smoother-based method is proposed in this paper.

METHODS

The smoother-based method not only corrects initial values of integrations, but also smooths integrating processes through a backward update. Both the orientation estimation and the velocity estimation are improved in this concept, which contribute to the improvement of the trajectory estimation.

RESULTS

The final results are compared with an optical motion capture system as reference. Accuracy is evaluated with ground level walking of nine adult participants, 2302 strides in total. Errors are reduced by 62% on stride length and 44% on stride width of the estimation without our method, with final errors [Formula: see text] and [Formula: see text].

CONCLUSION/SIGNIFICANCE

Results prove that our method can improve the accuracy of 3-D foot trajectory estimation. Furthermore, this smoother-based method can reduce drift-related errors when estimating trajectories, which will allow it to expand its applications into other IMU-based measurements.

Validating attentive locomotion training using interactive treadmill: an fNIRS study

BACKGROUND

Existing treadmill-based locomotion training, which has been used for gait function recovery, still has limitations, such as less attentive training. Interactive treadmills (ITMs) were developed to overcome these limitations, but it has not yet been verified that ITMs can make the user pay closer attention to walk training.

METHODS

An experimental comparison between ITMs and conventional treadmills was conducted by measuring the level of the user's attention using functional near-infrared spectroscopy (fNIRS). To consider the effect of task complexity on the subject's attention, we provided two (slow and fast) speed conditions for walking on both treadmills.

RESULTS

Both the cortical activity images and oxygenated hemoglobin (oxyHb) changes showed that the level of attention to walking induced by the ITM was significantly higher than that induced by the conventional treadmill. We found that the walking speed on the ITM also affected the level of attention.

CONCLUSION

ITM-based locomotion training would be a promising solution to the limitations of existing treadmill-based locomotion training currently used to improve gait function recovery.

TRIAL REGISTRATION

DGIST-HR-150309-03-02 . Registered 01 March 2015.

Estimation of spatio-temporal parameters of gait from magneto-inertial measurement units: multicenter validation among Parkinson, mildly cognitively impaired and healthy older adults

Background

The use of miniaturized magneto-inertial measurement units (MIMUs) allows for an objective evaluation of gait and a quantitative assessment of clinical outcomes. Spatial and temporal parameters are generally recognized as key metrics for characterizing gait. Although several methods for their estimate have been proposed, a thorough error analysis across different pathologies, multiple clinical centers and on large sample size is still missing. The aim of this study was to apply a previously presented method for the estimate of spatio-temporal parameters, named Trusted Events and Acceleration Direct and Reverse Integration along the direction of Progression (TEADRIP), on a large cohort (236 patients) including Parkinson, mildly cognitively impaired and healthy older adults collected in four clinical centers. Data were collected during straight-line gait, at normal and fast walking speed, by attaching two MIMUs just above the ankles. The parameters stride, step, stance and swing durations, as well as stride length and gait velocity, were estimated for each gait cycle. The TEADRIP performance was validated against data from an instrumented mat.

Results

Limits of agreements computed between the TEADRIP estimates and the reference values from the instrumented mat were − 27 to 27 ms for Stride Time, − 68 to 44 ms for Stance Time, − 31 to 31 ms for Step Time and − 67 to 52 mm for Stride Length. For each clinical center, the mean absolute errors averaged across subjects for the estimation of temporal parameters ranged between 1 and 4%, being on average less than 3% (< 30 ms). Stride length mean absolute errors were on average 2% (≈ 25 mm). Error comparisons across centers did not show any significant difference. Significant error differences were found exclusively for stride and step durations between healthy elderly and Parkinsonian subjects, and for the stride length between walking speeds.

Conclusions

The TEADRIP method was effectively validated on a large number of healthy and pathological subjects recorded in four different clinical centers. Results showed that the spatio-temporal parameters estimation errors were consistent with those previously found on smaller population samples in a single center. The combination of robustness and range of applicability suggests the use of the TEADRIP as a suitable MIMU-based method for gait spatio-temporal parameter estimate in the routine clinical use. The present paper was awarded the “SIAMOC Best Methodological Paper 2017”.