Quantitative Assessment of Changes in Muscle Contractility Due to Fatigue During NMES: An Ultrasound Imaging Approach

Flexible Ultrasonic Transducers for Wearable Biomedical Applications: A Review on Advanced Materials, Structural Designs, and Future Prospects

Due to the rapid developments in materials science and fabrication techniques, wearable devices have recently received increased attention for biomedical applications, particularly in medical ultrasound (US) imaging, sensing, and therapy. US is ubiquitous in biomedical applications because of its noninvasive nature, nonionic radiating, high precision, and real-time capabilities. While conventional US transducers are rigid and bulky, flexible transducers can be conformed to curved body areas for continuous sensing without restricting tissue movement or transducer shifting. This article comprehensively reviews the application of flexible US transducers in the field of biomedical imaging, sensing, and therapy. First, we review the background of flexible US transducers. Following that, we discuss advanced materials and fabrication techniques for flexible US transducers and their enabling technology status. Finally, we highlight and summarize some promising preliminary data with recent applications of flexible US transducers in biomedical imaging, sensing, and therapy. We also provide technical barriers, challenges, and future perspectives for further research and development.

Convergent Validity between Electromyographic Muscle Activity, Ultrasound Muscle Thickness and Dynamometric Force Measurement for Assessing Muscle

Muscle fatigue is defined as a reversible decline in performance after intensive use, which largely recovers after a resting period. Surface electromyography (EMG), ultrasound imaging (US) and dynamometry are used to assess muscle activity, muscle morphology and isometric force capacity. This study aimed to assess the convergent validity between these three methods for assessing muscle fatigue during a manual prehension maximal voluntary isometric contraction (MVIC). A diagnostic accuracy study was conducted, enrolling 50 healthy participants for the measurement of simultaneous changes in muscle thickness, muscle activity and isometric force using EMG, US and a hand dynamometer, respectively, during a 15 s MVIC. An adjustment line and its variance (R²) were calculated. Muscle activity and thickness were comparable between genders (p > 0.05). However, men exhibited lower force holding capacity (p < 0.05). No side-to-side or dominance differences were found for any variable. Significant correlations were found for the EMG slope with US (r = 0.359; p < 0.01) and dynamometry (r = 0.305; p < 0.01) slopes and between dynamometry and US slopes (r = 0.227; p < 0.05). The sample of this study was characterized by comparable muscle activity and muscle thickness change between genders. In addition, fatigue slopes were not associated with demography or anthropometry. Our findings showed fair convergent associations between these methods, providing synergistic muscle fatigue information.

Development of a Wearable Ultrasound Transducer for Sensing Muscle Activities in Assistive Robotics Applications

Robotic prostheses and powered exoskeletons are novel assistive robotic devices for modern medicine. Muscle activity sensing plays an important role in controlling assistive robotics devices. Most devices measure the surface electromyography (sEMG) signal for myoelectric control. However, sEMG is an integrated signal from muscle activities. It is difficult to sense muscle movements in specific small regions, particularly at different depths. Alternatively, traditional ultrasound imaging has recently been proposed to monitor muscle activity due to its ability to directly visualize superficial and at-depth muscles. Despite their advantages, traditional ultrasound probes lack wearability. In this paper, a wearable ultrasound (US) transducer, based on lead zirconate titanate (PZT) and a polyimide substrate, was developed for a muscle activity sensing demonstration. The fabricated PZT-5A elements were arranged into a 4 × 4 array and then packaged in polydimethylsiloxane (PDMS). In vitro porcine tissue experiments were carried out by generating the muscle activities artificially, and the muscle movements were detected by the proposed wearable US transducer via muscle movement imaging. Experimental results showed that all 16 elements had very similar acoustic behaviors: the averaged central frequency, -6 dB bandwidth, and electrical impedance in water were 10.59 MHz, 37.69%, and 78.41 Ω, respectively. The in vitro study successfully demonstrated the capability of monitoring local muscle activity using the prototyped wearable transducer. The findings indicate that ultrasonic sensing may be an alternative to standardize myoelectric control for assistive robotics applications.

A deep learning method to predict ankle joint moment during walking at different speeds with ultrasound imaging: A framework for assistive devices control

Robotic assistive or rehabilitative devices are promising aids for people with neurological disorders as they help regain normative functions for both upper and lower limbs. However, it remains challenging to accurately estimate human intent or residual efforts non-invasively when using these robotic devices. In this article, we propose a deep learning approach that uses a brightness mode, that is, B-mode, of ultrasound (US) imaging from skeletal muscles to predict the ankle joint net plantarflexion moment while walking. The designed structure of customized deep convolutional neural networks (CNNs) guarantees the convergence and robustness of the deep learning approach. We investigated the influence of the US imaging's region of interest (ROI) on the net plantarflexion moment prediction performance. We also compared the CNN-based moment prediction performance utilizing B-mode US and sEMG spectrum imaging with the same ROI size. Experimental results from eight young participants walking on a treadmill at multiple speeds verified an improved accuracy by using the proposed US imaging + deep learning approach for net joint moment prediction. With the same CNN structure, compared to the prediction performance by using sEMG spectrum imaging, US imaging significantly reduced the normalized prediction root mean square error by 37.55% ( < .001) and increased the prediction coefficient of determination by 20.13% ( < .001). The findings show that the US imaging + deep learning approach personalizes the assessment of human joint voluntary effort, which can be incorporated with assistive or rehabilitative devices to improve clinical performance based on the assist-as-needed control strategy.

Fused ultrasound and electromyography-driven neuromuscular model to improve plantarflexion moment prediction across walking speeds

Background

Improving the prediction ability of a human-machine interface (HMI) is critical to accomplish a bio-inspired or model-based control strategy for rehabilitation interventions, which are of increased interest to assist limb function post neurological injuries. A fundamental role of the HMI is to accurately predict human intent by mapping signals from a mechanical sensor or surface electromyography (sEMG) sensor. These sensors are limited to measuring the resulting limb force or movement or the neural signal evoking the force. As the intermediate mapping in the HMI also depends on muscle contractility, a motivation exists to include architectural features of the muscle as surrogates of dynamic muscle movement, thus further improving the HMI’s prediction accuracy.

Objective

The purpose of this study is to investigate a non-invasive sEMG and ultrasound (US) imaging-driven Hill-type neuromuscular model (HNM) for net ankle joint plantarflexion moment prediction. We hypothesize that the fusion of signals from sEMG and US imaging results in a more accurate net plantarflexion moment prediction than sole sEMG or US imaging.

Methods

Ten young non-disabled participants walked on a treadmill at speeds of 0.50, 0.75, 1.00, 1.25, and 1.50 m/s. The proposed HNM consists of two muscle-tendon units. The muscle activation for each unit was calculated as a weighted summation of the normalized sEMG signal and normalized muscle thickness signal from US imaging. The HNM calibration was performed under both single-speed mode and inter-speed mode, and then the calibrated HNM was validated across all walking speeds.

Results

On average, the normalized moment prediction root mean square error was reduced by 14.58 % (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p=0.012$$\end{document}p=0.012) and 36.79 % (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$p<0.001$$\end{document}p<0.001) with the proposed HNM when compared to sEMG-driven and US imaging-driven HNMs, respectively. Also, the calibrated models with data from the inter-speed mode were more robust than those from single-speed modes for the moment prediction.

Conclusions

The proposed sEMG-US imaging-driven HNM can significantly improve the net plantarflexion moment prediction accuracy across multiple walking speeds. The findings imply that the proposed HNM can be potentially used in bio-inspired control strategies for rehabilitative devices due to its superior prediction.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12984-022-01061-z.

Toward a wearable monitor of local muscle fatigue during electrical muscle stimulation using tissue Doppler imaging

Electrical muscle stimulation (EMS) is widely used in rehabilitation and athletic training to generate involuntary muscle contractions. However, EMS leads to rapid muscle fatigue, limiting the force a muscle can produce during prolonged use. Currently available methods to monitor localized muscle fatigue and recovery are generally not compatible with EMS. The purpose of this study was to examine whether Doppler ultrasound imaging can assess changes in stimulated muscle twitches that are related to muscle fatigue from electrical stimulation. We stimulated five isometric muscle twitches in the medial and lateral gastrocnemius of 13 healthy subjects before and after a fatiguing EMS protocol. Tissue Doppler imaging of the medial gastrocnemius recorded muscle tissue velocities during each twitch. Features of the average muscle tissue velocity waveforms changed immediately after the fatiguing stimulation protocol (peak velocity: -38%, p = .022; time-to-zero velocity: +8%, p = .050). As the fatigued muscle recovered, the features of the average tissue velocity waveforms showed a return towards their baseline values similar to that of the normalized ankle torque. We also found that features of the average tissue velocity waveform could significantly predict the ankle twitch torque for each participant (R2 = 0.255-0.849, p < .001). Our results provide evidence that Doppler ultrasound imaging can detect changes in muscle tissue during isometric muscle twitch that are related to muscle fatigue, fatigue recovery, and the generated joint torque. Tissue Doppler imaging may be a feasible method to monitor localized muscle fatigue during EMS in a wearable device.

Ultrasound Echogenicity as an Indicator of Muscle Fatigue during Functional Electrical Stimulation

Functional electrical stimulation (FES) is a potential neurorehabilitative intervention to enable functional movements in persons with neurological conditions that cause mobility impairments. However, the quick onset of muscle fatigue during FES is a significant challenge for sustaining the desired functional movements for more extended periods. Therefore, a considerable interest still exists in the development of sensing techniques that reliably measure FES-induced muscle fatigue. This study proposes to use ultrasound (US) imaging-derived echogenicity signal as an indicator of FES-induced muscle fatigue. We hypothesized that the US-derived echogenicity signal is sensitive to FES-induced muscle fatigue under isometric and dynamic muscle contraction conditions. Eight non-disabled participants participated in the experiments, where FES electrodes were applied on their tibialis anterior (TA) muscles. During a fatigue protocol under either isometric and dynamic ankle dorsiflexion conditions, we synchronously collected the isometric dorsiflexion torque or dynamic dorsiflexion angle on the ankle joint, US echogenicity signals from TA muscle, and the applied stimulation intensity. The experimental results showed an exponential reduction in the US echogenicity relative change (ERC) as the fatigue progressed under the isometric (R2=0.891±0.081) and dynamic (R2=0.858±0.065) conditions. The experimental results also implied a strong linear relationship between US ERC and TA muscle fatigue benchmark (dorsiflexion torque or angle amplitude), with R2 values of 0.840±0.054 and 0.794±0.065 under isometric and dynamic conditions, respectively. The findings in this study indicate that the US echogenicity signal is a computationally efficient signal that strongly represents FES-induced muscle fatigue. Its potential real-time implementation to detect fatigue can facilitate an FES closed-loop controller design that considers the FES-induced muscle fatigue.

Ultrasound Echogenicity-based Assessment of Muscle Fatigue During Functional Electrical Stimulation

The rapid onset of muscle fatigue during functional electrical stimulation (FES) is a major challenge when attempting to perform long-term periodic tasks such as walking. Surface electromyography (sEMG) is frequently used to detect muscle fatigue for both volitional and FES-evoked muscle contraction. However, sEMG contamination from both FES stimulation artifacts and residual M-wave signals requires sophisticated processing to get clean signals and evaluate the muscle fatigue level. The objective of this paper is to investigate the feasibility of computationally efficient ultrasound (US) echogenicity as a candidate indicator of FES-induced muscle fatigue. We conducted isometric and dynamic ankle dorsiflexion experiments with electrically stimulated tibialis anterior (TA) muscle on three human participants. During a fatigue protocol, we synchronously recorded isometric dorsiflexion force, dynamic dorsiflexion angle, US images, and stimulation intensity. The temporal US echogenicity from US images was calculated based on a gray-scaled analysis to assess the decrease in dorsiflexion force or motion range due to FES-induced TA muscle fatigue. The results showed a monotonic reduction in US echogenicity change along with the fatigue progression for both isometric (R² =0.870±0.026) and dynamic (R² =0.803±0.048) ankle dorsiflexion. These results implied a strong linear relationship between US echogenicity and TA muscle fatigue level. The findings indicate that US echogenicity may be a promising computationally efficient indicator for assessing FES-induced muscle fatigue and may aid in the design of muscle-in-the-loop FES controllers that consider the onset of muscle fatigue.

A Dual-Modal Approach Using Electromyography and Sonomyography Improves Prediction of Dynamic Ankle Movement: A Case Study

For decades, surface electromyography (sEMG) has been a popular non-invasive bio-sensing technology for predicting human joint motion. However, cross-talk, interference from adjacent muscles, and its inability to measure deeply located muscles limit its performance in predicting joint motion. Recently, ultrasound (US) imaging has been proposed as an alternative non-invasive technology to predict joint movement due to its high signal-to-noise ratio, direct visualization of targeted tissue, and ability to access deep-seated muscles. This paper proposes a dual-modal approach that combines US imaging and sEMG for predicting volitional dynamic ankle dorsiflexion movement. Three feature sets: 1) a uni-modal set with four sEMG features, 2) a uni-modal set with four US imaging features, and 3) a dual-modal set with four dominant sEMG and US imaging features, together with measured ankle dorsiflexion angles, were used to train multiple machine learning regression models. The experimental results from a seated posture and five walking trials at different speeds, ranging from 0.50 m/s to 1.50 m/s, showed that the dual-modal set significantly reduced the prediction root mean square errors (RMSEs). Compared to the uni-modal sEMG feature set, the dual-modal set reduced RMSEs by up to 47.84% for the seated posture and up to 77.72% for the walking trials. Similarly, when compared to the US imaging feature set, the dual-modal set reduced RMSEs by up to 53.95% for the seated posture and up to 58.39% for the walking trials. The findings show that potentially the dual-modal sensing approach can be used as a superior sensing modality to predict human intent of a continuous motion and implemented for volitional control of clinical rehabilitative and assistive devices.

Evaluation of Non-Invasive Ankle Joint Effort Prediction Methods for Use in Neurorehabilitation Using Electromyography and Ultrasound Imaging

OBJECTIVE

Reliable measurement of voluntary human effort is essential for effective and safe interaction between the wearer and an assistive robot. Existing voluntary effort prediction methods that use surface electromyography (sEMG) are susceptible to prediction inaccuracies due to non-selectivity in measuring muscle responses. This technical challenge motivates an investigation into alternative non-invasive effort prediction methods that directly visualize the muscle response and improve effort prediction accuracy. The paper is a comparative study of ultrasound imaging (US)-derived neuromuscular signals and sEMG signals for their use in predicting isometric ankle dorsiflexion moment. Furthermore, the study evaluates the prediction accuracy of model-based and model-free voluntary effort prediction approaches that use these signals.

METHODS

The study evaluates sEMG signals and three US imaging-derived signals: pennation angle, muscle fascicle length, and echogenicity and three voluntary effort prediction methods: linear regression (LR), feedforward neural network (FFNN), and Hill-type neuromuscular model (HNM).

RESULTS

In all the prediction methods, pennation angle and fascicle length significantly improve the prediction accuracy of dorsiflexion moment, when compared to echogenicity. Also, compared to LR, both FFNN and HNM improve dorsiflexion moment prediction accuracy.

CONCLUSION

The findings indicate FFNN or HNM approach and using pennation angle or fascicle length predict human ankle movement intent with higher accuracy.

SIGNIFICANCE

The accurate ankle effort prediction will pave the path to safe and reliable robotic assistance in patients with drop foot.

Ultra-High-Frame-Rate Ultrasound Monitoring of Muscle Contractility Changes Due to Neuromuscular Electrical Stimulation

The quick onset of muscle fatigue is a critical issue when applying neuromuscular electrical stimulation (NMES) to generate muscle contractions for functional limb movements, which were lost/impaired due to a neurological disorder or an injury. For in situ assessment of the effect of NMES-induced muscle fatigue, a novel noninvasive sensor modality that can quantify the degraded contractility of a targeted muscle is required. In this study, instantaneous strain maps of a contracting muscle were derived from ultra-high-frame-rate (2 kHz) ultrasound images to quantify the contractility. A correlation between strain maps and isometric contraction force values was investigated. When the muscle reached its maximum contraction, the maximum and the mean values of the strain map were correlated with the force values and were further used to stage the contractility change. During the muscle activation period, a novel methodology based on the principal component regression (PCR) was proposed to explore the strain-force correlation. The quadriceps muscle of 3 able-bodied human participants was investigated during NMES-elicited isometric knee extension experiments. Strong to very strong correlation results were obtained and indicate that the proposed measurements from ultrasound images are promising to quantify the muscle contractility changes during NMES.