An electrical bioimpedance scanning system for subsurface tissue detection in Robot Assisted Minimally Invasive Surgery

Piezoresistivity modeling of soft tissue electrical-mechanical properties: A validation study

In general, the electrical property of soft tissues is sensitive to the force applied to their surface. To further study the relationship between the force and the electrical property of soft tissues, this paper attempts to investigate the effect of static and higher-order stresses on electrical properties. Overall, a practical experimental platform is designed to acquire the force information and the electrical property of soft tissues during a contact procedure, which is featured different compression stimuli, such as constant pressing force, constant pressing speed, and step-force compression, etc. Furthermore, the piezoresistive characteristic is innovatively introduced to model the mechanical-electrical properties of soft tissue. Finite Element Modeling (FEM) is adopted to fit the static piezoresistivity of the soft tissue. Finally, experimental studies were performed to demonstrate the effect of stress on the electrical properties and the feasibility of the proposed piezoresistive model to describe soft tissues' mechanical and electrical properties.

Interactive 3D Force/Torque Parameter Acquisition and Correlation Identification during Primary Trocar Insertion in Laparoscopic Abdominal Surgery: 5 Cases

Laparoscopic procedures have become indispensable in gastrointestinal surgery. As a minimally invasive process, it begins with primary trocar insertion. However, this step poses the threat of injuries to the gastrointestinal tract and blood vessels. As such, the comprehension of the insertion process is crucial to the development of robotic-assisted/automated surgeries. To sustain robotic development, this research aims to study the interactive force/torque (F/T) behavior between the trocar and the abdomen during the trocar insertion process. For force/torque (F/T) data acquisition, a trocar interfaced with a six-axis F/T sensor was used by surgeons for the insertion. The study was conducted during five abdominal hernia surgical cases in the Department of Surgery, Faculty of Medicine, Ramathibodi Hospital, Mahidol University. The real-time F/T data were further processed and analyzed. The fluctuation in the force/torque (F/T) parameter was significant, with peak force ranging from 16.83 N to 61.86 N and peak torque ranging from 0.552 Nm to 1.76 Nm. The force parameter was observed to positively correlate with procedural time, while torque was found to be negatively correlated. Although during the process a surgeon applied force and torque in multiple axes, for a robotic system, the push and turn motion in a single axis was observed to be sufficient. For minimal tissue damage in less procedural time, a system with low push force and high torque was observed to be advantageous. These understandings will eventually benefit the development of computer-assisted or robotics technology to improve the outcome of the primary trocar insertion procedure.

Monopolar, bipolar, tripolar, and tetrapolar configurations in robot assisted electrical impedance scanning

OBJECTIVE

Tissue recognition is a critical process during a Robot-assisted minimally invasive surgery (RMIS) and it relies on the involvement of advanced sensing technology.

APPROACH

In this paper, the concept of Robot Assisted Electrical Impedance Sensing (RAEIS) is utilized and further developed aiming to sense the electrical bioimpedance of target tissue directly based on the existing robotic instruments and control strategy. Specifically, we present a new sensing configuration called pseudo-tetrapolar method. With the help of robotic control, we can achieve a similar configuration as traditional tetrapolar, and with better accuracy.

MAIN RESULTS

Five configurations including monopolar, bipolar, tripolar, tetrapolar and pseudo-tetrapolar are analyzed and compared through simulation experiments. Advantages and disadvantages of each configuration are thus discussed.

SIGNIFICANCE

This study investigates the measurement of tissue electrical property directly based on the existing robotic surgical instruments. Specifically, different sensing configurations can be realized through different connection and control strategies, making them suitable for different application scenarios.

Robot-Assisted Electrical Impedance Scanning system for 2D Electrical Impedance Tomography tissue inspection

The electrical impedance tomography (EIT) technology is an important medical imaging approach to show the electrical characteristics and the homogeneity of a tissue region noninvasively. Recently, this technology has been introduced to the Robot Assisted Minimally Invasive Surgery (RAMIS) for assisting the detection of surgical margin with relevant clinical benefits. Nevertheless, most EIT technologies are based on a fixed multiple-electrodes probe which limits the sensing flexibility and capability significantly. In this study, we present a method for acquiring the EIT measurements during a RAMIS procedure using two already existing robotic forceps as electrodes. The robot controls the forceps tips to a series of predefined positions for injecting excitation current and measuring electric potentials. Given the relative positions of electrodes and the measured electric potentials, the spatial distribution of electrical conductivity in a section view can be reconstructed. Realistic experiments are designed and conducted to simulate two tasks: subsurface abnormal tissue detection and surgical margin localization. According to the reconstructed images, the system is demonstrated to display the location of the abnormal tissue and the contrast of the tissues' conductivity with an accuracy suitable for clinical applications.