Super-Iterative Image Reconstruction in PET

A depth-of-interaction rebinning method based on both geometric and activity weights

BACKGROUND AND OBJECTIVE

For positron emission tomography (PET) scanners with depth-of-interaction (DOI) measurement, the DOI rebinning method that utilizes DOI information to process the projection data is critical to image quality. Current DOI rebinning methods map coincidence events onto the rebinned sinogram based on the correlation of lines of response (LOR). This study aims to incorporate prior radioactivity distribution of the imaging object into DOI rebinning to obtain better image quality.

METHODS

A DOI rebinning method based on both geometric and activity weights was proposed to assign coincidence events to the rebinned sinogram defined by a virtual ring. The geometric weights, representing the correlation between LORs, were calculated based on the areas of intersection. The activity weights, reflecting the activity distribution of the imaging object, were derived from the previous reconstructed image.

RESULTS

Monte Carlo simulation data from four phantoms, including the image quality phantom, Derenzo phantom, and two rat-like ROBY phantoms, was used to evaluate the proposed method. The recovery coefficient (RC), contrast recovery coefficient (CRC), structural similarity index measure (SSIM), and peak signal-to-noise ratio (PSNR) were used as image quality metrics. Compared to other DOI rebinning methods, the proposed method achieved the highest RC (maximum improvement of 32%) and CRC at the same noise level and was also optimal in terms of the SSIM and PSNR. Meanwhile, incorporating the prior activity distribution into DOI rebinning also improved the image reconstruction speed.

CONCLUSIONS

This work developed a new DOI rebinning method combining the correlation of LORs with the prior activity distribution, achieving relatively optimal image quality and reconstruction speed. Furthermore, it still needs to be evaluated on the actual equipment.

Super-resolution acquisition and reconstruction for cone-beam SPECT with low-resolution detector

BACKGROUND AND OBJECTIVE

Single-photon emission computed tomography (SPECT) imaging, which provides information that reflects the human body's metabolic processes, has unique application value in disease diagnosis and efficacy evaluation. The imaging resolution of SPECT can be improved by exploiting high-performance detector hardware, but this exploitation generates high research and development costs. In addition, the inherent hardware structure of SPECT requires the use of a collimator, which limits the resolution in SPECT. The objective of this study is to propose a novel super-resolution (SR) reconstruction algorithm with two acquisition methods for cone-beam SPECT with low-resolution (LR) detector.

METHODS

A SR algorithm with two acquisition methods is proposed for cone-beam SPECT imaging in the projection domain. At each sampling angle, multi LR projections can be obtained by regularly moving the LR detector. For the two proposed acquisition methods, we develop a new SR reconstruction algorithm. Using our SR algorithm, a SR projection with the corresponding sampling angle can be obtained from multi LR projections via multi-iterations, and then, the SR SPECT image can be reconstructed. The peak signal-to-noise ratio (PSNR), structural similarity index measure (SSIM), signal-to-noise ratio (SNR) and contrast recovery coefficient (CRC) are used to evaluate the final reconstruction quality.

RESULTS

The simulation results obtained under clean and noisy conditions verify the effectiveness of our SR algorithm. Three different phantoms are verified separately. 16 LR projections are obtained at each sampling angle, each with 32 × 32 bins. The high-resolution (HR) projection has 128 × 128 bins. The reconstruction result of the SR algorithm obtains an evaluation value that is almost the same as that of the HR reconstruction result. Our results indicate that the resolution of the resulting SPECT image is almost four times higher.

CONCLUSIONS

The authors develop a SR reconstruction algorithm with two acquisition methods for the cone-beam SPECT system. The simulation results obtained in clean and noisy environments prove that the SR algorithm has potential value, but it needs to be further tested on real equipment.