Modeling the Transitional Kinematics Between Variable-Incline Walking and Stair Climbing

Automatic Stub Avoidance for a Powered Prosthetic Leg Over Stairs and Obstacles

Passive prosthetic legs require undesirable compensations from amputee users to avoid stubbing obstacles and stairsteps. Powered prostheses can reduce those compensations by restoring normative joint biomechanics, but the absence of user proprioception and volitional control combined with the absence of environmental awareness by the prosthesis increases the risk of collisions. This article presents a novel stub avoidance controller that automatically adjusts prosthetic knee/ankle kinematics based on suprasensory measurements of environmental distance from a small, lightweight, low-power, low-cost ultrasonic sensor mounted above the prosthetic ankle. In a case study with two transfemoral amputee participants, this control method reduced the stub rate during stair ascent by 89.95% and demonstrated an 87.50% avoidance rate for crossing different obstacles on level ground. No thigh kinematic compensation was required to achieve these results. These findings demonstrate a practical perception solution for powered prostheses to avoid collisions with stairs and obstacles while restoring normative biomechanics during daily activities.

A Unified Controller for Natural Ambulation on Stairs and Level Ground with a Powered Robotic Knee Prosthesis

Powered lower-limb prostheses have the potential to improve amputee mobility by closely imitating the biomechanical function of the missing biological leg. To accomplish this goal, powered prostheses need controllers that can seamlessly adapt to the ambulation activity intended by the user. Most powered prosthesis control architectures address this issue by switching between specific controllers for each activity. This approach requires online classification of the intended ambulation activity. Unfortunately, any misclassification can cause the prosthesis to perform a different movement than the user expects, increasing the likelihood of falls and injuries. Therefore, classification approaches require near-perfect accuracy to be used safely in real life. In this paper, we propose a unified controller for powered knee prostheses which allows for walking, stair ascent, and stair descent without the need for explicit activity classification. Experiments with one individual with an above-knee amputation show that the proposed controller enables seamless transitions between activities. Moreover, transition between activities is possible while leading with either the sound-side or the prosthesis. A controller with these characteristics has the potential to improve amputee mobility.

Controlling Powered Prosthesis Kinematics over Continuous Transitions Between Walk and Stair Ascent

One of the primary benefits of emerging powered prosthetic legs is their ability to facilitate step-over-step stair ascent by providing positive mechanical work. Existing control methods typically have distinct steady-state activity modes for walking and stair ascent, where activity transitions involve discretely switching between controllers and often must be initiated with a particular leg. However, these discrete transitions do not necessarily replicate able-bodied joint biomechanics, which have been shown to continuously adjust over a transition stride. This paper presents a phase-based kinematic controller for a powered knee-ankle prosthesis that enables continuous, biomimetic transitions between walking and stair ascent. The controller tracks joint angles from a data-driven kinematic model that continuously interpolates between the steady-state kinematic models, and it allows both the prosthetic and intact leg to lead the transitions. Results from experiments with two transfemoral amputee participants indicate that knee and ankle kinematics smoothly transition between walking and stair ascent, with comparable or lower root mean square errors compared to variations from able-bodied data.

Generating synthetic gait patterns based on benchmark datasets for controlling prosthetic legs

BACKGROUND

Prosthetic legs help individuals with an amputation regain locomotion. Recently, deep neural network (DNN)-based control methods, which take advantage of the end-to-end learning capability of the network, have been proposed. One prominent challenge for these learning-based approaches is obtaining data for the training, particularly for the training of a mid-level controller. In this study, we propose a method for generating synthetic gait patterns (vertical load and lower limb joint angles) using a generative adversarial network (GAN). This approach enables a mid-level controller to execute ambulation modes that are not included in the training datasets.

METHODS

The conditional GAN is trained on benchmark datasets that contain the gait data of individuals without amputation; synthetic gait patterns are generated from the user input. Further, a DNN-based controller for the generation of impedance parameters is trained using the synthetic gait pattern and the corresponding synthetic stiffness and damping coefficients.

RESULTS

The trained GAN generated synthetic gait patterns with a coefficient of determination of 0.97 and a structural similarity index of 0.94 relative to benchmark data that were not included in the training datasets. We trained a DNN-based controller using the GAN-generated synthetic gait patterns for level-ground walking, standing-to-sitting motion, and sitting-to-standing motion. Four individuals without amputation participated in bypass testing and demonstrated the ambulation modes. The model successfully generated control parameters for the knee and ankle based on thigh angle and vertical load.

CONCLUSIONS

This study demonstrates that synthetic gait patterns can be used to train DNN models for impedance control. We believe a conditional GAN trained on benchmark datasets can provide reliable gait data for ambulation modes that are not included in its training datasets. Thus, designing gait data using a conditional GAN could facilitate the efficient and effective training of controllers for prosthetic legs.

Design, Kinematics and Gait Analysis, of Prosthetic Knee Joints: A Systematic Review

The aim of this review article is to appraise the design and functionality of above-knee prosthetic legs. So far, various transfemoral prosthetic legs are found to offer a stable gait to amputees but are limited to laboratories. The commercially available prosthetic legs are not reliable and comfortable enough to satisfy amputees. There is a dire need for creating a powered prosthetic knee joint that could address amputees' requirements. To pinpoint the gap in transfemoral prosthetic legs, prosthetic knee unit model designs, control frameworks, kinematics, and gait evaluations are concentrated. Ambulation exercises, ground-level walking, running, and slope walking are considered to help identify research gaps and areas where existing prostheses can be ameliorated. The results show that above-knee amputees can more effectively manage their issues with the aid of an active prosthesis, capable of reliable gait. To accomplish the necessary control, closed loop controllers and volitional control are integral parts. Future studies should consider designing a transfemoral electromechanical prosthesis based on electromyographic (EMG) signals to better predict the amputee's intent and control in accordance with that intent.

There are unique kinematics during locomotor transitions between level ground and stair ambulation that persist with increasing stair grade

Human ambulation is typically characterized during steady-state isolated tasks (e.g., walking, running, stair ambulation). However, general human locomotion comprises continuous adaptation to the varied terrains encountered during activities of daily life. To fill an important gap in knowledge that may lead to improved therapeutic and device interventions for mobility-impaired individuals, it is vital to identify how the mechanics of individuals change as they transition between different ambulatory tasks, and as they encounter terrains of differing severity. In this work, we study lower-limb joint kinematics during the transitions between level walking and stair ascent and descent over a range of stair inclination angles. Using statistical parametric mapping, we identify where and when the kinematics of transitions are unique from the adjacent steady-state tasks. Results show unique transition kinematics primarily in the swing phase, which are sensitive to stair inclination. We also train Gaussian process regression models for each joint to predict joint angles given the gait phase, stair inclination, and ambulation context (transition type, ascent/descent), demonstrating a mathematical modeling approach that successfully incorporates terrain transitions and severity. The results of this work further our understanding of transitory human biomechanics and motivate the incorporation of transition-specific control models into mobility-assistive technology.