Recent advances in enzymatic biofuel cells enabled by innovative materials and techniques

The past few decades have seen increasingly rapid advances in the field of sustainable energy technologies. As a new bio- and eco-friendly energy source, enzymatic biofuel cells (EBFCs) have garnered significant research interest due to their capacity to power implantable bioelectronics, portable devices, and biosensors by utilizing biomass as fuel under mild circumstances. Nonetheless, numerous obstacles impeded the commercialization of EBFCs, including their relatively modest power output and poor long-term stability of enzymes. To depict the current progress of EBFC and address the challenges it faces, this review traces back the evolution of EBFC and focuses on contemporary advances such as newly emerged multi or single enzyme systems, various porous framework-enzyme composites techniques, and innovative applications. Besides emphasizing current achievements in this field, from our perspective part we also introduced novel electrode and cell design for highly effective EBFC fabrication. We believe this review will assist readers in comprehending the basic research and applications of EBFCs as well as potentially spark interdisciplinary collaboration for addressing the pressing issues in this field.

Corrections to "Paper-Based Membraneless Co-Laminar Microfluidic Glucose Biofuel Cell With MWCNT-Fed Bucky Paper Bioelectrodes"

In the above article [1], the caption of Fig. 2 should read "Fig. 2. Images of untreated (bare) and surface modified BPs. (a) and (b) SEM images of bare BP (different magnification). (c) and (d) SEM images of GOx immobilized BP (different magnification). (e) and (f) SEM images of Laccase immobilized BP (different magnification). Copyright Permission from IEEE [2]."

Integrated Microfluidic Device with Carbon-Thread Microelectrodes for Electrochemical DNA Elemental Analysis

Evidently, any alternation in the concentration of the essential DNA elements, adenine (A), guanine (G), cytosine (C), and thymine (T), leads to several deformities in the physiological process causing various disorders. So, to realize a simple and precise technique for simultaneous determination of the DNA elements continue to remain a challenge. Microfluidic devices offer numerous advantage, such as low volume consumption, rapid response, highly sensitive and accurate real time analysis, for point of care testing (POCT). Herein, a microfluidic electrochemical device has been developed with three electrodes fabricated using a carbon-thread microelectrode (CTME) for DNA elemental detection. CTME, functionalized with graphitize mesoporous carbon (GMC), worked as a working electrode, bare CTME functioned as an auxiliary electrode while CTME coated with Ag/AgCl ink performed as a reference electrode. The developed device was used for evaluating individual DNA elemental base pairs simultaneously using various electrochemical techniques. The anodic peak current obtained for the DNA bases were 0.56 ± 0.04 V (G), 0.92 ± 0.02 V (A), 1.09 ± 0.05 V (T) and 1.24 ± 0.04 V (C) in a potential window of 0.2 V to 1.5 V. The device was corroborated for simultaneous sensing, and detection limits were found to be 36.73 μM (G), 20 μM (A), 22 μM (T) and 19.78 μM (C) in the linear range of 50 μM - 500 μM. Finally, the device was successfully used for instantaneous determination of DNA bases in the human blood serum sample. Overall, this work demonstrates the use of a simple microfluidic device with CTMEs for electrochemical determination of DNA bases amenable for POCT.

Paper-based mediatorless enzymatic microfluidic biofuel cells

In this study, eco-friendly and disposable paper-based membraneless microfluidic enzymatic fuel cells (EFCs) were developed without any mediators to reduce the toxicity and cost of EFCs. Glucose oxidase and laccase were immobilized on multi-walled carbon nanotube electrodes to catalyze the redox reaction of glucose and oxygen. Micromachining techniques well-suited for mass production were used to precisely fabricate micro-scale Y-shaped and cross-shaped EFCs. Experimental measurements showed that the concentration of glucose in the fuel solution affects the cell performance, which occurs because the flow speed of the fuel stream decreases as the concentration of glucose increases. The highest performance of power density (104.2 ± 3.35 μW cm^-2) and current density (615.6 ± 3.14 μA cm^-2) were obtained with the Y-shaped channel configuration at a glucose concentration of 100 mM. This performance is the best of all paper-based single EFCs reported to date. The new paper-based co-laminar flow mediatorless EFC exhibits strong potential to power miniaturized and portable on-site diagnostic devices.

Miniaturized Electrochemiluminescence Platform With Laser-Induced Graphene Electrodes for Multiple Biosensing

The present work demonstrates a miniaturized 3D printed Electrochemiluminescence (ECL) sensing platform with Laser-Induced Graphene (LIG) based Open Bipolar Electrodes (OBEs). To fabricate OBEs, polyimide (PI) substrate has been used as it provides properties like low-cost fabrication, high selectivity, great stability, easy reproducibility, cost-effectiveness and rapid prototyping. Moreover, graphene can be created on PI in a single step during the ablation of the CO₂ laser. Android smartphone was efficiently used to sense ECL signals as well as to drive the required voltage to the OBEs. With the optimized parameters, the imaging system was successfully used to detect Hydrogen Peroxide (H₂ O₂) with a linear range of 1 [Formula: see text] to [Formula: see text] and detection of limit (LOD) [Formula: see text] (R² = 0.9449, n = 3). In addition, the detection of glucose has been carried out with a linear range of [Formula: see text] to [Formula: see text] and detection of limit (LOD) [Formula: see text] (R² = 0.9875, n = 3). Further, real samples were tested to manifest the workability of the platform for random samples. Overall, the developed low-cost, rapidly realized and the miniaturized system can be used in many biomedical applications, environmental monitoring and point-of-care testings.

Advanced materials-integrated electrochemical sensors as promising medical diagnostics tools: A review

Electrochemical sensors have increasingly been linked with terms as modern biomedically effective highly selective and sensitive devices, wearable and wireless technology, portable electronics, smart textiles, energy storage, communication and user-friendly operating systems. The work brings the overview of the current advanced materials and their application strategies for improving performance, miniaturization and portability of sensing devices. It provides the extensive information on recently developed (bio)sensing platforms based on voltammetric, amperometric, potentiometric and impedimetric detection modes including portable, non-invasive, wireless, and self-driven miniaturized devices for monitoring human and animal health. Diagnostics of selected free radical precursors, low molecular biomarkers, nucleic acids and protein-based biomarkers, bacteria and viruses of today's interest is demonstrated.

Autonomous Energy Harvester Based on Textile-Based Enzymatic Biofuel Cell for On-Demand Usage

This paper presents an autonomous energy harvester based on a textile-based enzymatic biofuel cell, enabling an efficient power management and on-demand usage. The proposed biofuel cell works by an enzymatic reaction with glucose in sweat absorbed by the specially designed textile for sustainable and efficient energy harvesting. The output power of the textile-based biofuel cell has been optimized by changing electrode size and stacking electrodes and corresponding fluidic channels suitable for following power management circuit. The output power level of single electrode is estimated less than 0.5 μW and thus a two-staged power management circuit using intermediate supercapacitor has been presented. As a solution to produce a higher power level, multiple stacks of biofuel cell electrodes have been proposed and thus the textile-based biofuel cell employing serially connected 5 stacks produces a maximal power of 13 μW with an output voltage of 0.88 V when load resistance is 40 kΩ. A buck-boost converter employing a crystal oscillator directly triggered by DC output voltage of the biofuel cell makes it possible to obtain output voltage of the DC-DC converter is 6.75 V. The efficiency of the DC-DC converter is estimated as approximately 50% when the output power of the biofuel cell is tens microwatts. In addition, LT-spice modeling and simulation has been presented to estimate power consumption of each element of the proposed DC-DC converter circuit and the predicted output voltage has good agreement with measurement result.

New Biocatalyst Including a 4-Nitrobenzoic Acid Mediator Embedded by the Cross-Linking of Chitosan and Genipin and Its Use in an Energy Device

A new anodic catalyst consisting of carbon nanotube, 4-nitrobenzoic acid, chitosan, genipin, and glucose oxidase (GOx) (CNT/4-NBA/[Chit/GOx/GP]) is suggested to promote the glucose oxidation reaction (GOR) and the performance of enzymatic biofuel cell (EBC). In this catalyst, through the cross-linked structure of chitosan and genipin and the proper distribution of amine groups within chitosan, many GOx molecules are maximally captured, their leaching out is suppressed, and the GOR is improved upon. In addition, 4-nitrobenzoic acid plays the role of mediator well. The effect induced by the cross-linked structure is evaluated by ultraviolet-visible (UV-vis) spectroscopy, pH measurements, and electrochemical characterizations. According to the characterizations, the new CNT/4-NBA/[Chit/GOx/GP] catalyst contains a large amount of GOx (17.8 mg/mL) and produces a high anodic current (331 μA/cm² at 0.3 V vs Ag/AgCl) with a low onset potential (0.05 V vs Ag/AgCl) because its catalytic activity follows the desirable reaction pathway that minimizes creation of a protonated amine group that interferes with GOR. When the performance of EBC using this catalyst as an anodic electrode is measured, the EBC shows a high open-circuit voltage of 0.54 V and a maximum power density of 38 μW/cm².