Composite Neural Learning-Based Nonsingular Terminal Sliding Mode Control of MEMS Gyroscopes

Command filter-based event-triggered control for stochastic MEMS gyroscopes with finite-time prescribed performance

This paper proposes an adaptive neural control strategy for stochastic microelectromechanical system (MEMS) gyroscopes, aiming to achieve a prescribed performance in a finite time. The radial basis function neural network is introduced to address the system's unknown nonlinear dynamics and stochastic disturbances. Then, the technology of finite-time prescribed performance function, along with the method of command-filtered backstepping design, is utilized to ensure both transient and steady-state performance and simultaneously solve the problem of "explosion of complexity." Moreover, a switching threshold event-triggered control law is proposed to cut down on communication resources and eliminate corresponding parametric inequality restrictions. The proposed adaptive state feedback control strategy is able to guarantee that the output tracking error converges to a prescribed, arbitrarily small residual set. Additionally, the closed-loop system's signals can be semi-globally ultimately uniformly bounded in probability. Finally, numerical simulations demonstrate the effectiveness and superiority of the proposed strategy.

Self-Constructing Fuzzy Neural Fractional-Order Sliding Mode Control of Active Power Filter

In this article, a fractional-order sliding mode control (FOSMC) scheme is proposed for mitigating harmonic distortions in the power system, whereby a self-constructing recurrent fuzzy neural network (SCRFNN) is used to weaken the effect of compound nonlinearity caused by unknown uncertainties and environmental fluctuations. The fractional-order sliding mode controller (SMC) is constructed to maintain the control system to be asymptotically stable and a fractional-order calculus is introduced into an SMC to soften the sliding manifold design and realize chattering reduction. Considering parameter variations existing in the power system model, SCRFNN is adopted to approximate the unknown dynamics, which is able to dynamically update network structure by optimizing the fuzzy division, and a feedback connection is incorporated into the feedforward neural network, which is regarded as a storage unit to enhance the capability of coping with temporal problem. The control scheme combining the FOSMC with the SCRFNN can make the tracking error and its time derivative converge to zero. Experimental studies demonstrate the validity of the designed scheme, and comprehensive comparisons illustrate its superiority in harmonic suppression and high robustness.

Observer-Based Adaptive Optimized Control for Stochastic Nonlinear Systems With Input and State Constraints

In this work, an adaptive neural network (NN) optimized output-feedback control problem is studied for a class of stochastic nonlinear systems with unknown nonlinear dynamics, input saturation, and state constraints. A nonlinear state observer is designed to estimate the unmeasured states, and the NNs are used to approximate the unknown nonlinear functions. Under the framework of the backstepping technique, the virtual and actual optimal controllers are developed by employing the actor-critic architecture. Meanwhile, the tan-type Barrier optimal performance index functions are developed to prevent the nonlinear systems from the state constraints, and all the states are confined within the preselected compact sets all the time. It is worth mentioning that the proposed optimized control is clearly simple since the reinforcement learning (RL) algorithm is derived based on the negative gradient of a simple positive function. Furthermore, the proposed optimal control strategy ensures that all the signals in the closed-loop system are bounded. Finally, a practical simulation example is carried out to further illustrate the effectiveness of the proposed optimal control method.

Neural-Network-Based Constrained Output-Feedback Control for MEMS Gyroscopes Considering Scarce Transmission Bandwidth

In this article, a neural-network-based constrained output-feedback control is considered for microelectromechanical system (MEMS) gyroscopes subject to scarce transmission bandwidth and lumped disturbances resulting from model uncertainties, dynamic coupling, and environmental disturbances. First, a hybrid quantizer capable of achieving an adjustable communication rate and quantization density is proposed to convert continuous control signals into discrete values, allowing for reduced chattering behavior even when control actions vary within large regions and enhanced tracking accuracy can be ensured. Subsequently, by applying two types of nonlinear mapping, all state variables of MEMS gyroscopes are restrained within the predefined time-varying asymmetric functions without imposing stringent feasibility conditions on virtual control laws. Furthermore, an echo-state network-based minimal learning parameter neural observer is developed to simultaneously recover the unmeasurable velocity-state variables, matched as well as unmatched disturbances in constrained MEMS gyroscopes dynamics, enabling an output-feedback control solution with a decreased online learning complexity. It is shown via the Lyapunov stability and nonsmooth analysis that all signals in the closed-loop system remain ultimately uniformly bounded even with discontinuous control actions. Comparison simulations are produced to certify the effectiveness of the presented controller.

Fuzzy Multiple Hidden Layer Recurrent Neural Control of Nonlinear System Using Terminal Sliding-Mode Controller

This study designs a fuzzy double hidden layer recurrent neural network (FDHLRNN) controller for a class of nonlinear systems using a terminal sliding-mode control (TSMC). The proposed FDHLRNN is a fully regulated network, which can be simply considered as a combination of a fuzzy neural network (FNN) and a radial basis function neural network (RBF NN) to improve the accuracy of a nonlinear approximation, so it has the advantages of these two neural networks. The main advantage of the proposed new FDHLRNN is that the output values of the FNN and DHLRNN are considered at the same time, and the outer layer feedback is added to increase the dynamic approximation ability. FDHLRNN was designed to approximate the nonlinear sliding-mode equivalent control term to reduce the switching gain. To ensure the best approximation capability and control performance, the proposed FDHLRNN using TSMC is applied for the second-order nonlinear model. Two simulation examples are implemented to verify that the proposed FDHLRNN has faster convergence speed and the FDHLRNN with TSMC has good dynamic property and robustness, and a hardware experimental study with an active power filter proves the feasibility of the method.

Finite-Time Disturbance Observer of Nonlinear Systems

In practical applications, for highly nonlinear systems, how to implement control tasks for dynamic systems with uncertain parameters is still a hot research issue. Aiming at the internal parameter fluctuations and external unknown disturbances in nonlinear system, this paper proposes an adaptive dynamic terminal sliding mode control (ADTSMC) based on a finite-time disturbance observer (FTDO) for nonlinear systems. A finite-time disturbance observer is designed to compensate for the unknown uncertainties and a dynamic terminal sliding mode control (DTSMC) method is developed to achieve finite time convergence and weaken system chattering. Moreover, a dual hidden layer recurrent neural network (DHLRNN) estimator is proposed to approximate the sliding mode gain, so that the switching item gain is not overestimated and optimal value is obtained. Finally, simulation experiments of an active power filter model verify the designed ADTSMC method has better steady-state and dynamic-steady compensation effects with at least 1% THD reduction in the presence of nonlinear load and disturbances compared with the simple adaptive DTSMC law.

Learning and Near-Optimal Control of Underactuated Surface Vessels With Periodic Disturbances

In this article, we propose a novel learning and near-optimal control approach for underactuated surface (USV) vessels with unknown mismatched periodic external disturbances and unknown hydrodynamic parameters. Given a prior knowledge of the periods of the disturbances, an analytical near-optimal control law is derived through the approximation of the integral-type quadratic performance index with respect to the tracking error, where the equivalent unknown parameters are generated online by an auxiliary system that can learn the dynamics of the controlled system. It is proved that the state differences between the auxiliary system and the corresponding controlled USV vessel are globally asymptotically convergent to zero. Besides, the approach theoretically guarantees asymptotic optimality of the performance index. The efficacy of the method is demonstrated via simulations based on the real parameters of an USV vessel.

Finite-Time Command-Filtered Composite Adaptive Neural Control of Uncertain Nonlinear Systems

This article presents a new command-filtered composite adaptive neural control scheme for uncertain nonlinear systems. Compared with existing works, this approach focuses on achieving finite-time convergent composite adaptive control for the higher-order nonlinear system with unknown nonlinearities, parameter uncertainties, and external disturbances. First, radial basis function neural networks (NNs) are utilized to approximate the unknown functions of the considered uncertain nonlinear system. By constructing the prediction errors from the serial-parallel nonsmooth estimation models, the prediction errors and the tracking errors are fused to update the weights of the NNs. Afterward, the composite adaptive neural backstepping control scheme is proposed via nonsmooth command filter and adaptive disturbance estimation techniques. The proposed control scheme ensures that high-precision tracking performances and NN approximation performances can be achieved simultaneously. Meanwhile, it can avoid the singularity problem in the finite-time backstepping framework. Moreover, it is proved that all signals in the closed-loop control system can be convergent in finite time. Finally, simulation results are given to illustrate the effectiveness of the proposed control scheme.

Output Feedback Control of Micromechanical Gyroscopes Using Neural Networks and Disturbance Observer

This article addresses the output feedback control of micromechanical (MEMS) gyroscopes using neural networks (NNs) and disturbance observer (DOB). For the unmeasured system states, the state observer and the high gain observer are constructed. The adaptive NNs are investigated to approximate the nonlinear dynamics, including the known nominal terms and the system uncertainties caused by environmental fluctuations. For the time-varying disturbances, the DOB is utilized. The sliding mode control is employed to enhance the robustness. Through simulation verification, the output feedback control using NNs and DOB can adapt to the dynamics of MEMS gyroscope with unmeasured system speed, while an expected effective tracking performance is obtained in the presence of unknown system nonlinearities and external disturbances.

Composite Learning Control of Overactuated Manned Submersible Vehicle With Disturbance/Uncertainty and Measurement Noise

In this article, a novel composite learning control scheme based on nonlinear disturbance observer (NDOB), neural network (NN), and model-based state observer (MSOB) is investigated for the manned submersible vehicle. First, an MSOB is employed to reconstruct the real output signals from noise-contained measurements. Second, a composite estimation is developed where an NDOB is designed to estimate external disturbance and an NN is employed for model uncertainty. Furthermore, a control allocation technique is used to address the overactuated problem of the manned submersible vehicle. The rigorous stability analysis of the closed-loop manned submersible system is given via the Lyapunov theorem. Finally, several representative simulation results illustrate the superior control performance of the composite learning control scheme for the manned submersible vehicle.

A New Data-Driven Control System for MEMSs Gyroscopes: Dynamics Estimation by Type-3 Fuzzy Systems

In this study, a novel data-driven control scheme is presented for MEMS gyroscopes (MEMS-Gs). The uncertainties are tackled by suggested type-3 fuzzy system with non-singleton fuzzification (NT3FS). Besides the dynamics uncertainties, the suggested NT3FS can also handle the input measurement errors. The rules of NT3FS are online tuned to better compensate the disturbances. By the input-output data set a data-driven scheme is designed, and a new LMI set is presented to ensure the stability. By several simulations and comparisons the superiority of the introduced control scheme is demonstrated.

Modelling, Simulation and Dynamic Sliding Mode Control of a MEMS Gyroscope

An adaptive dynamic sliding mode control via a backstepping approach for a microelectro mechanical system (MEMS) vibratory z-axis gyroscope is presented in this paper. The time derivative of the control input of the dynamic sliding mode controller (DSMC) is treated as a new control variable for the augmented system which is composed of the original system and the integrator. This DSMC can transfer discontinuous terms to the first-order derivative of the control input, and effectively reduce the chattering. An adaptive dynamic sliding mode controller with the method of backstepping is derived to real-time estimate the angular velocity and the damping and stiffness coefficients and asymptotical stability of the designed systems can be guaranteed. Simulation examples are investigated to demonstrate the satisfactory performance of the proposed adaptive backstepping sliding mode control.

Random Error Reduction Algorithms for MEMS Inertial Sensor Accuracy Improvement-A Review

Research and industrial studies have indicated that small size, low cost, high precision, and ease of integration are vital features that characterize microelectromechanical systems (MEMS) inertial sensors for mass production and diverse applications. In recent times, sensors like MEMS accelerometers and MEMS gyroscopes have been sought in an increased application range such as medical devices for health care to defense and military weapons. An important limitation of MEMS inertial sensors is repeatedly documented as the ease of being influenced by environmental noise from random sources, along with mechanical and electronic artifacts in the underlying systems, and other random noise. Thus, random error processing is essential for proper elimination of artifact signals and improvement of the accuracy and reliability from such sensors. In this paper, a systematic review is carried out by investigating different random error signal processing models that have been recently developed for MEMS inertial sensor precision improvement. For this purpose, an in-depth literature search was performed on several databases viz., Web of Science, IEEE Xplore, Science Direct, and Association for Computing Machinery Digital Library. Forty-nine representative papers that focused on the processing of signals from MEMS accelerometers, MEMS gyroscopes, and MEMS inertial measuring units, published in journal or conference formats, and indexed on the databases within the last 10 years, were downloaded and carefully reviewed. From this literature overview, 30 mainstream algorithms were extracted and categorized into seven groups, which were analyzed to present the contributions, strengths, and weaknesses of the literature. Additionally, a summary of the models developed in the studies was presented, along with their working principles viz., application domain, and the conclusions made in the studies. Finally, the development trend of MEMS inertial sensor technology and its application prospects were presented.