Multi-Directional Ankle Impedance During Standing Postures

Tunable, Textile-Based Joint Impedance Module for Soft Robotic Applications

The design of soft actuators is often focused on achieving target trajectories or delivering specific forces and torques, rather than controlling the impedance of the actuator. This article outlines a new soft, tunable pneumatic impedance module based on an antagonistic actuator setup of textile-based pneumatic actuators intended to deliver bidirectional torques about a joint. Through mechanical programming of the actuators (select tuning of geometric parameters), the baseline torque to angle relationship of the module can be tuned. A high bandwidth fluidic controller that can rapidly modulate the pressure at up to 8 Hz in each antagonistic actuator was also developed to enable tunable impedance modulation. This high bandwidth was achieved through the characterization and modeling of the proportional valves used, derivation of a fluidic model, and derivation of control equations. The resulting impedance module was capable of modulating its stiffness from 0 to 100 Nm/rad, at velocities up to 120°/s and emulating asymmetric and nonlinear stiffness profiles, typical in wearable robotic applications.

Impedance Control of Human Ankle Joint With Electrically Stimulated Antagonistic Muscle Co-Contraction

Functional electrical stimulation (FES) is often used, typically in an open-loop manner, to restore paralyzed motor function for daily living activities. Several feedback control strategies have been developed to improve the performance and usability of FES-evoked movement. However, most of them have been position controllers, while the control strategy for human movement has been known as impedance modulation. Moreover, few studies have attempted to use antagonistic co-contraction for FES feedback control despite its expected benefits, such as enhanced stability and performance and better rehabilitation outcome. In this paper, we propose a robust impedance controller for FES that can adjust the intrinsic joint stiffness using co-contraction. It consists of an impedance control law based on time-delay estimation to compensate for the nonlinear uncertain joint dynamics and an antagonistic muscle co-contraction allocator to address the intrinsic joint stiffness caused by the co-contraction. The proposed controller was implemented on the ankle joints of five healthy subjects to simulate a standing balance situation. The results verified that the proposed controller can achieve desired impedance accurately by adjusting the intrinsic stiffness that stems from the change in the amount of co-contraction (up to 48.4% better impedance achievement with high desired stiffness).