Generating an Adjustable Focused Field With an Annular Shape Using a Cylindrical Acoustic Transducer Array

Theoretical modeling and experimental verification of an improved radial composite transducer consisting of a metal ring and a radially polarized piezoelectric stack

In the ring radial transducer, the wall thickness of the radially polarized piezoelectric ceramic is limited by the polarization technology and operating voltage, resulting in the limited power capacity and vibration ability of the transducer. Hence, an improved novel radial composite transducer (nRCT) is proposed in this paper, which consists of a radially polarized piezoelectric stack and a metal ring. Piezoelectric stack is used to enhance vibration and effectively solve the problem of difficult excitation caused by large wall thickness. A new electromechanical equivalent circuit model (EECM) of the nRCT in radial vibration is established, and the relationship between frequency characteristics of the nRCT and geometric size is analyzed. The finite element method (FEM) is used to carry out numerical modeling of the nRCT and the traditional radial composite transducer (tRCT), and preliminarily verify the calculation results of EECM. Compared with the tRCT, under the same electrical excitation, the equivalent electrical impedance of the nRCT designed in this paper decreases to 26%, and the radial vibration displacement increases to 142%. Finally, the nRCT and the tRCT are fabricated, and the experimental results have well verified the results of the theoretical analysis. The proposed radial piezoelectric stack model provides a new idea for the optimal design of radial vibration piezoelectric devices, which is expected to be further applied to the design of hydrophones, piezoelectric transformers, and medical ultrasound devices.

A Circular Total Focusing Method With Eccentricity Correction and Intensity Compensation for Endoscopic Ultrasound Imaging of Dual-Layered Media

Present endoscopic ultrasound (EUS) imaging methods for circular array (CA) suffer from the nonuniform spatial resolution in the imaging of a dual-layered media, such as the tubes' immersion EUS inspection. The problem is mainly attributed to the restricted focus and beam de-focusing at the interface. In this article, a circular total focusing method (CTFM) is proposed, which leverages the concept of the conventional total focusing method (TFM) and makes three vital improvements to overcome the challenges. First, to obtain the accurate time-of-flight (TOF) in the dual-layered media, a fourth-order equation of Snell's law is built and solved in polar coordinate system. Second, a fast geometric approximation method is derived to correct the TOF distortion caused by the transducer's eccentricity. Third, the intensity compensation is applied to flatten the imaging intensity at different positions by considering the directivity of element, transmission at interface, and divergence in media. The CTFM is validated on a tube's immersion EUS using a 10 MHz CA with 128 elements. Experimental results demonstrate that the proposed CTFM outperforms existing imaging methods. The lateral and axial resolutions are 0.71 and 0.30 mm, which are 27.5% and 33.3% higher than those of the classic delay-and-sum (DAS) method. The CTFM image shows high and uniform signal-to-noise ratio (SNR) which is 33.6% higher than that of DAS images. The CTFM provides a novel EUS imaging modality which can be applied in both medical and nondestructive testing domains.

Development and Validation of Independent Dual-Focusing Transducer for Internal Inspection of Tubes

Controllable and focused ultrasonic beams in 3-D cylindrical space are essential when inspecting tubes or tubular objects. In this article, we develop an independent dual-focusing (IDF) array ultrasonic transducer composed of 64 prefocused elements and validate the feasibility of this design. Using k-Wave toolbox based on the k-space pseudospectral method, we simulate the acoustic pressure fields in the time domain and analyze beam profiles in circumferential-radial plane, axial-radial plane and 3-D space. The simulation results prove that the structure of IDF array transducer with the designed delay laws is capable of forming focused beam. A four-element aperture with 15 mm element radius shows narrow beams on both the circumferential and axial directions. On the basis of the simulation results, we fabricate a prototype transducer, test its electrical and acoustical performance, and implement internal inspection of a tube with an inner diameter of 13 mm. The echoes of four-element aperture show a higher amplitude than others, and this is consistent with the simulation. The eight longitudinal grooves and eight ring grooves of no more than 0.5 mm width are applied in inspection experiments, and the results demonstrate that the detection sensitivity of the IDF transducer can reach 0.2 mm in both the circumferential and axial directions. The results demonstrate that forming regulable and focused beam in 3-D cylindrical space is feasible using the IDF array which can be applied when inspecting tubes.